Hydrogen Oxidation on a Platinum Microelectrode: Effect of Carbon Monoxide Impurities

The kinetics of the hydrogen oxidation and the CO adsorption on a Pt (ultra)microelectrode is studied in a 0.5 M H₂SO₄ solution saturated with a mixture of gaseous H₂ and CO at partial CO pressures p _CO = 10–500 ppm. The balance between rates of diffusion and adsorption of CO at different adsorption times is studied. Studied is the effect of CO impurities in H₂ on steady-state polarization curves for the hydrogen ionization and nonsteady-state curves of the oxidation current decay with time at 0.02–0.05 V. Conditions under which in a certain time interval and at a certain CO concentration the slope of an I vs. t curve is proportional to p _CO are determined. The obtained dependence may be used when designing a technique for monitoring CO impurities in technical hydrogen.     

Thermal Study of the Cr-Mo-O System in Air

The phase diagram of the ternary system Cr-Mo-O in air was established from the results of thermal analysis of mixtures with different initial CrO3 to MoO3 ratios. It was found that MoO3 did not take any chromium oxide into solid solution. The presence of Cr2O3 destabilized MoO3 causing it to decompose to MoO2 in the temperature range 723-958 K depending on the initial Cr/Mo ratio. The decomposition of pure MoO3 MoO2 did not occur in air at any temperature. However, this decomposition took place through the formation of the compound Cr2O3·3MoO3(ss) and its decomposition to Cr2O3·3MoO2(ss). The latter compound has never been reported before and the X-ray data for this compound are given. The previously reported catalytic activity of Cr2O3·3MoO3(ss), at high temperatures, is presumably due to its reduction to Cr2O3·3MoO2(ss). This revised version was published online in July 2006 with corrections to the Cover Date.     

Oxidation of 2-dialkylaminomethyl-4,6-di-tert-butylphenols

Oxidative transformations of 2-dialkylaminomethyl-4,6-di-tert-butylphenols depend on the nature of the oxidant, the character of the substituents at the nitrogen atom, and the medium. A mechanism of the oxidation of these compounds is suggested. The molecular structure of the compound obtained as a result of oxidative trimerization of 2-dimethylaminomethyl-4,6-di-tert-butylphenol was established by X-ray structural analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1328–1335, July, 1997.     

催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

New palladium nanoclusters. Synthesis,structure, and catalytic properties

The reduction of palladium(ii) carboxylates Pd₃(OCOR)₆ (R = Me, Et, CHMe₂, CMe₃) with hydrogen in alcohol solutions containing 1,10-phenanthroline (phen) and subsequent oxidation with oxygen gave new palladium nanoclusters, mainly particles with a nearly spherical metal core and an average size of 18 . Based on elemental analysis, NMR, X-ray photoelectron spectroscopy, and EXAFS, nanoclusters were described by the idealized formula Pd₁₄₇phen₃₂O₆₀(OCOR)₃₀. The specimens contained up to 25% smaller 55-atomic Pd clusters with a 10 metal core. New nanoclusters catalyze hydrogenation of alkynes and alkenes, reduction of nitriles with formic acid, oxidation of aliphatic and benzylic alcohols, oxidative esterification of ethylene and propylene, and disproportionation of benzyl alcohol into toluene and benzaldehyde.     

Oxidation of Heterocyclic Compounds by Permanganate Anion. (Review)

Data on the oxidative transformations of heterocyclic compounds with permanganate anion are reviewed     

A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

DSC combined with chemiluminescence for studying polymer oxidation

The oxidation of (Ti,W)C ceramics have been studied as a part of the program to investigate of properties of powder materials. Thermogravimetry, derivative thermogravimetry (TG-DTG), and differential thermal analysis DSC have been used in the non-isothermal study of powder oxidation (Ti,W)C in dry air atmosphere. The powder of crystalline carbide cermets with a ratio of W:Ti equals 0.3 was used in this study. The diagrams were recorded on a sample mass 3.42 mg on the Setaram apparatus in temperatures ranging from 25 to 1000°C. Seven different heating rates were used. The analytical techniques SEM, WDX, EDX and XRD were used in the research. The kinetics of the oxidation process was followed by the integral method by applying the Coats-Redfern's approximation. The kinetic models of particular stages of (Ti,W)C oxidation were evaluated from the dynamic mass losses data. The values of apparent activation energy E and the pre-exponential factor A of each stage of the oxidation were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．