金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

The catalytic properties of several supported metal catalysts on different carriers were studied in the partial oxidation of methane (POM) to syngas. In our experiment, supported noble metal catalysts exhibited better performance than the other supported transition metal catalysts. The catalyst performances were significantly influenced by the d-electron configuration of the active metal components and the dispersion of active metal components on the support. A catalyst with a moderate number of unpaired electrons in the d-orbital of the active metal support without obvious acidity or redox activity (e.g. MgO) was suitable for POM performance. The Rh/SiO2 catalyst was the best in the POM reaction, among those investigated. Reaction conditions apparently also affected the POM performance of the catalyst. The conversion of methane and the selectivity for CO increased with the reaction temperature, and a high CH4/O2 ratio was not beneficial for POM performance.     

Catalytic Combustion of Methane over CO1-xMgxO/Al2O3/FeCrAl Monolithic Catalysts

A series of CoxMgxO/Al2O3/FeCrAl catalysts （x=0-1） were prepared. The structures of the catalysts were characterized using XRD, SEM, and TPR analyses. The catalytic activity of the catalysts for methane combustion was evaluated in a continuous flow microreactor. The results indicated that the active washcoats adhered well on the FeCrAl foils. The phases in the catalysts were Co--xMgxO solid solutions, α-Al2O3, and γ-Al2O3. The surface particle size of the catalysts varied with variations in the molar ratios of Co to Mg. The Co component of the Co1_xMgxO/Al2O3/FeCrAl catalysts played an important role in the catalytic activity for methane combustion. In the Co1-xMgxO/AluO3/FeCrAl series catalyst （x=0.2-0.8）, the catalytic activity in terms of x was in the order of 0.5〉0.2〉0.8 under the experimental conditions. The presence of Mg in these catalysts could promote the thermal stability to a large extent. There were strong interactions between the Co1-xMgxO oxides and the AluO3/FeCrAl supports.     

新型反相微乳液制备纳米结构甲烷催化燃烧催化剂La0.95Ba0.05MnAl11O19-α的研究

提出一种由水, 异丙醇, 正丁醇组成的新型微乳液, 并以其为反应介质制备了甲烷高温燃烧La_0.95Ba_0.05MnAl₁₁O_19-a催化剂. 采用¹H NMR, FT-IR, 电导法及激光粒度散射法研究了新型微乳液中水的结构及相特性. 新型微乳液中水的体积分数小于一定值时, 电导率与水含量成非线性关系, k～φ曲线上存在一临界值(φ^P＝0.15). 水质子的化学位移随水含量的降低移向高场. 加入4% D₂O测定的O—D键的伸缩振动随水含量增加而向高波数方向移动. 异丙醇铝在新型微乳液中水解形成的Al(OH)₃ 胶体粒子的粒径范围为226～329 nm. 采用新型微乳液作为反应介质制备的Ba_0.05La_0.95MnAl₁₁O_19-α催化剂的粒径在30 nm, 明显小于纯水制备的样品(100 nm). BET 比表面积为65 m²/g, 比纯水制备样品高出约一倍. XRD结果显示, 1200 ℃焙烧10 h即可获得含单一β-Al₂O₃相的催化剂. Ba_0.05La_0.95MnAl₁₁O_19-α催化剂甲烷催化燃烧的T₁₀为420 ℃, 比纯水制备样品下降了90 ℃. 甲烷催化燃烧活性提高是由于含有较多Mnⁿ+纳米结构六铝酸盐的形成.     

冠醚化Schiff 碱配合物金属胶束催化BNPP水解动力学

研究了两种新的冠醚化Schiff 碱过渡金属配合物与表面活性剂Brij35(聚氧乙烯(23)十二烷基醚)形成的金属胶束对BNPP（对硝基苯酚磷酸二酯）的催化水解反应. 探讨了催化反应机理, 建立了一种金属胶束催化BNPP水解的动力学数学模型; 计算了模拟酶催化反应的相关参数和表观活化能. 结果表明, 此类金属胶束作为模拟水解金属酶对BNPP水解反应表现出良好的催化活性.     

聚醚桥连二异羟肟酸单核和双核过渡金属配合物催化PNPP水解

Two polyether bridged dihydroxamic acids and their mono-and binuclear manganese(Ⅱ), zinc(Ⅱ) complexes have been synthesized and employed as models to mimic hydrolase in catalytic hydrolysis of p-nitrophenyl picolinate (PNPP). The reaction kinetics and the mechanism of hydrolysis of PNPP have been investigated. The kinetic mathematical model for PNPP cleaved by the complexes has been proposed. The effects of the different central metal ion, mono-and binuclear metal, the pseudo-macrocyclic polyether constructed by polyethoxy group of the complexes, and reactive temperature on the rate for catalytic hydrolysis of PNPP have been examined. The results showed that the transition metal dthydroxamates exhibited high catalytic activity to the hydrolysis of PNPP, the catalytic activity of binuclear complexes was higher than that of mononuclear ones, and the pseudo-macrocyclic polyether might synergetically activate H20 coordinated to metal ion with central metal ion together and promote the catalytic hydrolysis of PNPP.     

一氧化氮选择还原锡锆固溶体催化剂的结构特性

采用双股并流共沉淀方法制备了SnO2含量从10％至90％的锡锆体系DeNOx催化剂,用XRD、微区电子衍射、FT-Raman及FT-IR等技术深入研究了锡锆体系氧化物的结构及其随组成的变化规律.结果表明，由于Sn4＋与Zr4＋离子半径接近,SnO2与ZrO2易于形成固溶体,并随组成变化表现出不同的结构特征.纯ZrO2为单斜相,当少量Sn4＋（SnO2 ≤ 20％）进入ZrO2晶格时形成四方相富锆固溶体,Sn4＋起到稳定ZrO2四方相的作用;随着SnO2含量的增大,结构从无定形或微晶态的富锆固溶体(含SnO2 30～50％)经富锆固溶体与金红石结构的富锡固溶体在55％ SnO2含量的共存状态变化到具有金红石结构的富锡固溶体（SnO2 ≥ 60％）.FT-Raman和FT-IR光谱测试证明,Zr进入SnO2晶格使得Sn－O键的结合减弱,Sn离子上的有效正电荷减小,降低了SnO2对丙烯的燃烧能力,从而提高了对NO的还原活性.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

One site fits both: A model for the ternary complex of folate + NADPH in R67 dihydrofolate reductase, a D2 symmetric enzyme

R67 dihydrofolate reductase (DHFR) is a novel enzyme that confers resistance to the antibiotic trimethoprim. The crystal structure of R67 DHFR displays a toroidal structure with a central active-site pore. This homotetrameric protein exhibits 222 symmetry, with only a few residues from each chain contributing to the active site, so related sites must be used to bind both substrate (dihydrofolate) and cofactor (NADPH) in the productive R67 DHFR?NADPH?dihydrofolate complex. Whereas the site of folate binding has been partially resolved crystallographically, an interesting question remains: how can the highly symmetrical active site also bind and orient NADPH for catalysis? To model this ternary complex, we employed DOCK and SLIDE, two methods for docking flexible ligands into proteins using quite different algorithms. The bound pteridine ring of folate (Fol I) from the crystal structure of R67 DHFR was used as the basis for docking the nicotinamide-ribose-P_i (NMN) moiety of NADPH. NMN was positioned by both DOCK and SLIDE on the opposite side of the pore from Fol I, where it interacts with Fol I at the pore's center. Numerous residues serve dual roles in binding. For example, Gln 67 from both the B and D subunits has several contacts with the pteridine ring, while the same residue from the A and C subunits has several contacts with the nicotinamide ring. The residues involved in dual roles are generally amphipathic, allowing them to make both hydrophobic and hydrophilic contacts with the ligands. The result is a `hot spot' binding surface allowing the same residues to co-optimize the binding of two ligands, and orient them for catalysis.     

Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)