Thermal characteristics of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate in contact with nitrocellulose/nitroglycerine under continuous heat flow

Dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) and nitrocellulose/nitroglycerine (NC/NG) possess good energy properties, which were widely used in propellants, explosives and pyrotechnics. They are easy to contact with each other during their application and storage. However, their thermal characteristics under continuous heat flow have not been reported yet. Therefore, it is of great practical significance to study the thermal properties of TKX-50/NC/NG (mixture of TKX-50 and NC/NG). In this paper, the thermal characteristics and pressure behaviors of TKX-50/NC/NG, TKX-50 and NC/NG were characterized by high pressure differential scanning calorimetry (HPDSC) and adiabatic scanning calorimetry (ASC). The results showed that TKX-50 and NC/NG can promote each other to decompose under continuous heat flow, especially the thermal decomposition which affected by gases generation and heat feedback was more violent in the confined space. The decomposition peak temperature of TKX-50/NC/NG shifted to low temperature when the heat loss was ignored and the removal of decomposition gas was suppressed. The possible decomposition mechanism of TKX-50/NC/NG was speculated. It was considered that the intermediate products of TKX-50 and NC/NG decomposition under thermal stimulation would react with each other, which promoted TKX-50/NC/NG decomposition in one step at lower temperature. Thus, TKX-50 has high reactivity and high potential risk after contact with NC/NG under continuous heat flow. TKX-50 is not suitable for application with NC/NG. This study provides a reference for the structural design of nitrogen rich explosives and further broadens the researchers’ understanding of the application of TKX-50.     

Influence of interlayer coupling and intra-layer Coulomb interaction on electronic transport in bilayer graphene

Calculations of renormalized perpendicular conductivity within Kubo formula employing single particle temperature dependent Green's function formalism for bilayer graphene has been attempted. On the basis of numerical analysis, perpendicular conductivity as a function of temperature, interlayer coupling, onsite Coulomb interaction and carrier concentration per site has been analyzed for both AA- and AB-stacked bilayer graphene. It is found that perpendicular conductivity increases with interlayer coupling and also with temperature at low temperatures while at higher temperatures, there is saturation in perpendicular conductivity. Influences of onsite Coulomb interaction and carrier concentration per site on perpendicular conductivity is just opposite to each other while onsite Coulomb energy suppresses the rate of increase of σ_⊥/σ_⊥0 with temperature, on the other hand increase in carrier density per site enhance this rate significantly. Finally, theoretically obtained results on temperature dependent perpendicular conductivity are viewed in terms of electronic transport data as well as recent theoretical works available in bilayer graphene.     

Capillary zone electrophoresis with UV-scanning detection for the analysis of metal species and their organic binding partners in biological systems

A capillary zone electrophoretic method with UV-scanning detection for the separation and identification of both free ligands and metal species is presented. The electrophoretic behavior of naturally occurring binding partners such as organic acids and amino acids was studied and compared with their metal-complexes. Copper(II) complexes of citrate and amino acids showed decreased electrophoretic mobilities and altered UV spectra. The optimized method was validated on ultrafiltered cow's milk and human milk samples. In cow's milk six low molecular weight substances, including citrate, orotate, and hippurate, could be separated. Metal supplementation with Cu(II), Ni(II), or Zn(II) decreased not only the citrate peak but also the orotate signal and in the case of copper(II) supplementation a new signal for the copper(II)-citrate complex appeared. In human milk samples various amino acids such as glutamate, phenylalanine, tyrosine, and tryptophan could be identified besides citrate. The electrophoretic mobilites and peak areas of the amino acids were also influenced by the metal supplementation.     

Design,Synthesis, and Structure–Activity Relationship Study of Potent MAPK11 Inhibitors

Huntington’s disease (HD) is a rare single-gene neurodegenerative disease, which can only be treated symptomatically. Currently, there are no approved drugs for HD on the market. Studies have found that MAPK11 can serve as a potential therapeutic target for HD. Regrettably, no MAPK11 small molecule inhibitors have been approved at present. This paper presents three series of compounds that were designed and synthesized based on the structure of skepinone-L, a known MAPK14 inhibitor. Among the synthesized compounds, 13a and 13b, with IC₅₀ values of 6.40 nM and 4.20 nM, respectively, displayed the best inhibitory activities against MAPK11. Furthermore, the structure–activity relationship (SAR) is discussed in detail, which is constructive in optimizing the MAPK11 inhibitors for better activity and effect against HD.     

A New Series of Aryloxyacetic Acids Endowed with Multi-Target Activity towards Peroxisome Proliferator-Activated Receptors (PPARs), Fatty Acid Amide Hydrolase (FAAH), and Acetylcholinesterase (AChE)

A new series of aryloxyacetic acids was prepared and tested as peroxisome proliferator-activated receptors (PPARs) agonists and fatty acid amide hydrolase (FAAH) inhibitors. Some compounds exhibited an interesting dual activity that has been recently proposed as a new potential therapeutic strategy for the treatment of Alzheimer’s disease (AD). AD is a multifactorial pathology, hence multi-target agents are currently one of the main lines of research for the therapy and prevention of this disease. Given that cholinesterases represent one of the most common targets of recent research, we decided to also evaluate the effects of our compounds on the inhibition of these specific enzymes. Interestingly, two of these compounds, (S)-5 and 6, showed moderate activity against acetylcholinesterase (AChE) and even some activity, although at high concentration, against Aβ peptide aggregation, thus demonstrating, in agreement with the preliminary dockings carried out on the different targets, the feasibility of a simultaneous multi-target activity towards PPARs, FAAH, and AChE. As far as we know, these are the first examples of molecules endowed with this pharmacological profile that might represent a promising line of research for the identification of novel candidates for the treatment of AD.     

Acoustoelastic effect simulation by time–space finite element formulation based on quadratic interpolation of the acceleration

Acoustoelastic effect describes the change of ultrasound velocity due to the initial stress. Its simulation involves a numerical analysis of nonlinear elastodynamics and requires high accuracy in the time domain. A time–space finite element formulation, derived from the quadratic interpolation of the acceleration within a time segment, is proposed for an accurate simulation of the acoustoelastic effect in the present study. Ten different integration schemes are generated based on this formulation and nine of them are found to be conditionally stable. Among the nine stable schemes, one is found to obtain a spectral radius of one when the normalized step ratio is less than 5.477, indicating no numerical dissipation or numerical divergence. Compared with integration schemes from previous studies, this integration scheme demonstrates better performance in calculation accuracy and energy conservation. A two-stage approach, namely the static stage and the dynamic stage, has been employed in the simulation of the acoustoelastic effect. The former stage is adopted to obtain the initial stress and the latter stage, where the proposed integration scheme is implemented, is adopted to simulate the ultrasound propagation in an initial stress state. The simulation results of the dynamic stage show that the ultrasound velocity increases in a compression stress state and decreases in a tension stress state for aluminum alloy, which is in good agreement with previous experimental studies. Together with the simulation result of the static stage, it is conjectured that the acoustoelastic effect results from the stress-dependent elastic modulus.     

Aeroelastic analysis of cantilever plates using Peters’ aerodynamic model,and the influence of choosing beam or plate theories as the structural model

In this paper, the aeroelastic analyses of a rectangular cantilever plate of varying aspect ratio is presented. The classical plate theory has been selected as the structural model. The main point that distinguishes this study from previously reported research is employing Peters’ theory to model aerodynamic effect which is not straightforward. The Peters’ aerodynamic model was originally developed to provide lift and moment, which is only applicable to the structural model based on the beam theories. In this study, using the basic concept of the Peters’ aerodynamic model in addition to utilizing the Fourier series, the pressure distribution is derived, which makes Peters’ model applicable to structural models based on plate theory. This combination provides a much simpler state–space aeroelastic model for plates in comparison to the prevalent panel methods, which could lead to a significant reduction in computational time. In addition, the aeroelastic response of the plate with respect to changes in the structural model from the beam theory to the plate theory is evaluated. By using data from an experiment carried out at Duke University, the theoretical results are evaluated. Furthermore, the differences in structural models obtained from the plate and beam theories can be divided into two distinct parts, which are responsible for differences in bending and torsional behaviors of the structure, separately. This approach enables us to measure the effects of differences of each behavior separately, which could provide with a new insight into the problem. It has been determined that the flutter speeds obtained from the beam and plate aeroelastic models are little affected by the difference in bending behavior, but rather is mainly caused by the difference in torsional frequencies.     

Electrical switching effect in a photochromic molecule between two graphene electrodes

We propose a single-molecule electrical switches consisting of a photochromic dimethyldihydropyrene/cyclophanediene molecule sandwiched between two graphene electrodes and investigate the electronic transport by using density-functional theory and nonequilibrium Green's function methods. The “open” and “closed” isomers of the photochromic molecule are shown to have electrical switching behavior and negative differential resistance effect. Moreover, it is also found that the switching ratio between two different conductive states depends on the ambient temperature, and the device behaves as a stable electrical switch around room temperature, which is in agreement with a recent experimental study of another photochromic molecule diarylethene reported by Jia et al. (2016) [17].     

Upper Bound of the Number of Zeros for Abelian Integrals in a Kind of Quadratic Reversible Centers of Genus One

By using the methods of Picard-Fuchs equation and Riccati equation, we study the upper bound of the number of zeros for Abelian integrals in a kind of quadratic reversible centers of genus one under polynomial perturbations of degree $n$. We obtain that the upper bound is $7[(n-3)/2]+5$ when $n\ge 5$, $8$ when $n=4$, $5$ when $n=3$, $4$ when $n=2$, and $0$ when $n=1$ or $n=0$, which linearly depends on $n$.     

基于Hopf-Cole变换的Burgers方程初边值问题的Sinc-Galerkin法

利用Sinc-Galerkin法数值求解Burgers方程的初边值问题。首先,用Hopf-Cole变换将二阶非线性的Burgers方程变换为二阶线性方程,同时把第一类边界条件变为第二类边界条件。时间上的导数采用θ加权格式离散,空间导数采用Sinc-Galerkin法离散,端点处分别引入权函数处理变换后的第二类边界条件。最后,通过数值算例验证了Sinc-Galerkin法的指数收敛性,与精确解相比,本文构造的数值格式精度高,能够有效捕捉激波等物理现象。