Absorption enhancement of ultrathin crystalline silicon solar cells with frequency upconversion nanosphere arrays

A design of ultrathin crystalline silicon solar cells patterned with α-NaEr_(0.2)Y_(0.8)F_4 upconversion nanosphere(NSs) arrays on the surface was proposed. The light trapping performance ofα-NaEr_(0.2)Y_(0.8)F_4 NSs with different ratios of sphere diameter to sphere pitch was systematically studied by COMSOL Multiphysics. The influence of different NS diameters and ratio to the average optical absorption of ultrathin crystalline silicon solar cell was calculated, as well as the short circuit current densities. The results show that the average optical absorption of solar cells with 2.33 μm silicon covered by α-NaEr_(0.2)Y_(0.8)F_4 NSs of 100 nm in diameter and 5.2 in ratio has improved by 8.5% compared to planar silicon solar cells with the same thickness of silicon. The light trapping performance of different thicknesses of silicon solar cells with the optimized configuration of NSs was also discussed. The results indicate that our structure enhances the light absorption. The presented model will be the basis for further simulations concerning frequency upconversion of α-NaEr_(0.2)Y_(0.8)F_4 materials.     

Optical Trapping with Focused Surface Waves

Near-field optical trapping can be realized with focused evanescent waves that are excited at the water–glass interface due to the total internal reflection, or with focused plasmonic waves excited on the water–gold interface. Herein, the performance of these two kinds of near-field optical trapping techniques is compared using the same optical microscope configuration. Experimental results show that only a single-micron polystyrene bead can be trapped by the focused evanescent waves, whereas many beads are simultaneously attracted to the center of the excited region by focused plasmonic waves. This difference in trapping behavior is analyzed from the electric field intensity distributions of these two kinds of focused surface waves and the difference in trapping behavior is attributed to photothermal effects due to the light absorption by the gold film.     

一种新型铒镱共掺碲硅酸盐玻璃的光谱性质及荧光俘获效应研究

用高温熔制法制备了系列Er^3＋／Yb^3＋共掺碲硅酸盐玻璃样品，测试和分析了玻璃样品的吸收光谱、荧光光谱、上转换发光光谱及热稳定性。结果表明：这种玻璃具有较宽的荧光半高宽、较大的受激发射截面，较好的热稳定性。970nm泵浦下该系列玻璃在可见光525，546和658nm这3处存在明显的上转换现象，它们分别由Er^3＋离子^2H11/2→^4 I15/2，4S3/2→^4 I15/2和^4 F9/2→^4 I15/2辐射跃迁产生。另外，测试和讨论了在不同样品厚度下玻璃的光谱特性，如荧光光谱、荧光寿命和上转换发光光谱等。结果表明，荧光俘获效应对Er^3＋离子1．5μm波段荧光及上转换发光都有着较大的影响，并随着玻璃厚度的增加而增大，导致测量值与实际值产生较大的偏差。     

角膜内皮细胞载体膜片的性质研究及移植试验

利用溶剂浇铸/颗粒沥滤技术制备出壳聚糖和硫酸软骨素共混膜, 研究了共混膜的透光性、 表面结构、 红外图谱、 X-射线衍射图谱以及生物相容性和生物降解性. 结果表明, 共混膜透明度高, 结构均匀, 孔隙大小合适, 壳聚糖分子与硫酸软骨素达到分子水平分散, 且分子间存在较强的相互作用, 共混膜具有良好的生物相容性和生物降解性. 以共混膜为载体培养兔角膜内皮细胞, 结果表明, 共混膜非常适合角膜细胞贴附生长, 10 d内长成良好单层细胞. 将载有角膜内皮细胞的膜片植入内皮缺损兔眼中, 在56 d内术眼基本保持透明, 之后角膜水肿, 逐渐模糊并出现新生血管, 在230 d时术眼新生血管基本消失, 角膜恢复透明.     

基于BiOCl-Fe2O3@TiO2介孔复合材料的光电化学合成氨性能研究

传统合成氨工艺存在能耗高、污染严重的问题. 因此, 高效、低能耗绿色合成氨工艺的开发迫在眉睫. 光电化学以H₂O和N₂为原料, 可以在太阳光驱动下, 在常温常压条件下实现氨的合成, 因而受到广泛重视. 但总的来说, 效率和产率都达不到实际要求. 新型高效催化剂及工艺的开发是提高合成氨产率及效率的关键. 非贵金属催化剂具备成本低、来源广泛、可操作性强的优势, 有利于光电化学合成氨的产业化. 本实验采用溶胶凝胶结合原位热裂解的方法制备了分散性好、结构均匀的BiOCl-Fe₂O₃@TiO₂复合材料, 对其物相、微观结构、表面状态、光学性能、电学性能等方面进行了系统表征, 并探究了该材料在常温常压下光电化学合成氨的催化活性. 结果表明, 同纯介孔TiO₂相比_, BiOCl-Fe₂O₃@TiO₂的吸收带隙变窄, 可见光吸收能力增强, 光生载流子的利用率增加, 光电合成氨的产率提升了7倍, 且BiOCl-Fe₂O₃@TiO₂显示了优异的化学稳定性. 本研究工作为绿色合成氨催化材料及工艺设计提供了新思路.     

Basics of optical force

Light possesses momentum, and hence, force is exerted on materials if they absorb and/or scatter light. Laser techniques that use optical forces are currently attracting considerable attention. Optical manipulation for trapping, transporting small particles, and measuring the interparticle force is a representative technique. In addition, photoinduced force microscopy is a promising scanning type of microscopy using optical force. Optical force techniques have recently been used in various fields of research, such as molecular bioscience, organic photochemistry, materials engineering, and molecular fluid dynamics. In these techniques, several types of optical forces such as scattering, absorption, and gradient forces play their respective roles. In this article, we summarize the basics of optical forces and present their elementary expressions for using simplified models of light and matter systems. This will help the readers of this Special Issue to understand how different types of forces are distinguished in the basic expressions used for analyzing the optical force phenomena that appear depending on the light geometry and matter systems. After observing simplified cases of scattering and absorption forces, we introduce general formulae for the optical force and then discuss how different components appear in particular cases of laser geometry and materials.     

可见光辐射下富勒烯[60]–氧化铁复合催化剂的制备及光芬顿法降解有机污染物研究（英文）

采用简单的可升级的化学浸渍法,将Fe_2O_3掺杂到富勒烯[60](C_(60))上,制得C_(60)-Fe_2O_3纳米复合材料.采用了粉末X射线衍射、X射线光电子能谱(XPS)、扫描电镜、高分辨透射电镜、紫外-可见吸收光谱、拉曼光谱和傅里叶变换红外光谱,对其进行了表征.结果发现,XPS数据中,Fe2p_(3/2)和Fe2p_(1/2)的XPS特征峰分别位于结合能710.9和724.1 eV处,对应Fe_2O_3的Fe~(3+).富勒烯颗粒均匀分散在Fe_2O_3纳米颗粒表面,Fe_2O_3纳米颗粒的平均尺寸大约为20–30 nm;Fe_2O_3对于可见光只有微弱的吸收,而制备出的C_(60)-Fe_2O_3纳米复合材料对于可见光有较强的吸收响应.本文将C_(60)-Fe_2O_3纳米复合光催化材料用于光催化降解50 mL,20mg/l MB和50 mL,10 mg/L苯酚实验.结果发现,在双氧水存在下和可见光(420 nm)辐射条件下,C_(60)-Fe_2O_3对上述有机污染物均有较好的降解效果.通过测定上述有机物的削减程度,评估了C_(60)-Fe_2O_3催化剂的光催化活性,通过改变实验条件,得到可见光/C_(60)-Fe_2O_3/双氧水体系的最佳光催化降解条件:在pH值为3.06~10.34的范围内,投加0.02 g催化剂,5 mol/L双氧水.结果表明,在最佳条件下,亚甲基蓝在80min内脱色率能达到98.9%,矿化率能达到71%.浸出实验的结果表明,C_(60)-Fe_2O_3复合光催化剂中的铁浸出量可以忽略不计.经过5次循环使用后,C_(60)-Fe_2O_3复合光催化剂仍具有较高的光催化活性.为了进一步验证C_(60)-Fe_2O_3复合光催化剂的应用广泛性,本文在可见光/C_(60)-Fe_2O_3/双氧水体系下,开展了降解RhB,MO和苯酚的试验,结果发现,该催化剂它们也具有高的降解效果.机理研究发现,C_(60)-Fe_2O_3复合光催化剂的高效催化能力可归因于C_(60)和Fe_2O_3的协同效应:在可见光辐射下,由于C_(60)具有独特的光敏性特征,能够接收电子并把它们转移到Fe_2O_3的Fe3d轨道,并通过一系列反应,达到Fe~(3+)/Fe~(2+)循环平衡.利用活性组分捕集实验,对光催化反应过程中的主要活性氧化剂进行了区分.结果表明,羟基自由基在整个过程中发挥了最主要的作用.     

功能化石墨烯的制备及抗癌药物递送载体的研究

以聚苯乙烯磺酸钠(PSS)为保护剂,利用水合肼还原氧化石墨烯制备了一种新型的聚苯乙烯磺酸钠功能化石墨烯(PSS-GNS).结果表明制备的PSS-GNS是水溶分散性的纳米片层材料.考察了PSS-GNS对模型抗癌药物罗丹明6G(R6G)的吸附行为,结果表明PSS-GNS对R6G吸附量较大(2.77 mg/mg).体外释放研究结果表明PSS-GNS/R6G对R6G的释放具有p H响应性和缓释作用.PSS-GNS的细胞毒性较低,能顺利进入癌细胞内并持续缓慢地释放R6G.因此,PSS-GNS有望成为一种新型的抗癌药物递送载体.     

天然高分子复合羟基磷灰石材料的制备与应用

羟基磷灰石(HA)是人类与动物骨骼中主要无机物组成成分,因其具有良好的生物相容性、生物活性和骨传导作用,作为新型合成生物材料已应用于骨组织的修复与替代技术。本文在介绍HA主要制备方法(如:沉淀法、乳液法、水热反应法、溶胶-凝胶法、机械化学法、固态合成法、水解法、超声化学法、热解法、模板法和电沉积法等)和应用的基础上,重点综述了各类天然高分子与HA复合材料的制备及应用研究进展。天然高分子,如:纤维素、淀粉、甲壳素、壳聚糖、蛋白(包括胶原蛋白、明胶、角蛋白、丝蛋白和植物蛋白)等,与HA复合后制备的天然高分子复合羟基磷灰石材料,在保持其生物相容性的同时,又能改善复合材料的机械性能与生物活性,使其可用于医用材料、载体材料和吸附分离材料。最后,本文指出为了满足生物体内的特殊环境(如强的韧性、与骨生长速度匹配性能等)及不同领域的要求,天然高分子复合HA材料需要发展的方向。     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.