Dependence of the relative retention of organic compounds on the nature and pressure of the carrier gas and on the thickness of the PEG-20M film in the capillary column

The effects of the carrier gas nature and pressure on the relative retention values of organic compounds were studied using a series of capillary columns differing in the film thickness of the polar stationary phase (PEG-20M). Relative retention depends linearly on the carrier gas pressure. This dependence becomes more pronounced in the following order of carrier gases: helium < nitrogen < carbon dioxide. The limiting relative retention at a carrier gas pressure approaching zero rather than relative retention values measured experimentally (relative retention time, Kovats retention index,etc.) is an invariant characteristic of a compound subjected to chromatography. For the carrier gases studied, the limiting retention values almost does not depend on the nature of the carrier gas used. The limiting indicating the complex absorption-adsorption nature of these parameters. Dissolution of a carrier gas in the stationary liquid phase has an effect on the relative retention. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2177–2186, December, 1997.     

丹宁纤维素富集-氢化物发生ICP-AES同时测定水中痕量锗

研究了丹宁纤维素富集10~(-11)g/ml级锗的条件,并考察了地下水中36种共存离子对磷酸介质中氢化物发生ICP-AES测定锗的干扰和消除,应用于测定地下水中的超痕量锗,结果满意,检出限为15ng/L。     

乳状液膜法提取L—谷氨酸的研究

乳状液膜法提取Ｌ－谷氨酸的研究徐占林（四平师范学院化学系四平１３６０００）严忠张河哲（东北师范大学化学系长春１３００２４）关键词Ｌ－谷氨酸乳状液膜载体萃取中图分类号Ｏ６２３．７３６氨基酸作为重要的生化产品，广泛应用于食品、饲料、医药、化工等许多领域，...     

Studies of poly-<Emphasis Type="Italic">L</Emphasis>-lysine-starch nanoparticle preparation and its application as gene carrier

Anion starch nanoparticle (StNP) with a diameter of 50 nm was prepared in water-in-oil microemulsion, with soluble starch as raw materials and POCl₃ as crosslinking agent. PLL-StNP was prepared by linking poly-L-lysine (PLL) on the surface of StNP. At the same time, the size of PLL-StNP and its stability in aqueous solution were checked by AFM. The analysis of plasmid DNA binding, DNase I enzymatic degradation, toxicity and transfection were done. We discovered that PLL-StNP may be used as non-virus nanoparticle gene carrier. And we developed the method of preparing PLL-StNP gene carrier and used it in cell transfection. As non-virus gene carrier, PLL-StNP has some advantages, such as large load of DNA, high transfection efficiency, low cell toxicity and biodegradability.     

溶剂聚合膜pH电极作内电极的气敏电极的研究

研究了以中性载体为活性物的石墨内导平头溶剂聚合膜(SPM)pH电极作内电极的二氧化碳和氨气敏电极。电极的性能取决于中性载体的特性,其中以菸酸十八酯为内电极膜活性物的二氧化碳气敏电极和以二辛基十八胺为活性物的氨气敏电极性能较佳。二氧化碳气敏电极用作丙酮酸脱羧酶酶电极的原电极,其性能院于传统的以玻璃pH电极作内电极的二氧化碳气敏电极。     

Computer generation of chemical structures from known fragments

The interactive generation of chemical structures from given fragments is described and discussed. It is implemented as a part of our expert system CARBON, based on C-13 NMR spectra. As it is designed, this program can also be a useful tool in the structure elucidation process when information on parts of the structure is obtained by other means (IR, mass and other spectrometries, chemical analysis, other relevant information). The topological characteristics of candidate fragments are first chosen interactively and then the elements are connected in all topologically possible ways. In the following step, the topological building blocks are substituted by chemical structural fragments resulting in a set of all chemical structures consistent with the input information.     

Optimization of selenium determination in plant samples by hydride generation and axial view inductively coupled plasma atomic emission spectrometry

The use of hydride generation coupled with axial view inductively couple plasma atomic emission spectrometry was presented for the determination of selenium in plant samples. The chemical factors affecting potentially the hydride generation efficiency (hydrochloric acid, sodium borohydride and sodium hydroxide concentrations) were assessed through investigation of chemical interference, accuracy and repeatability. The accuracy of measurements was not affected by elements present in high concentration in the plant matrix (K, Ca, Mg, and P). No interference was also observed with transition metals. Using a real sample (maize) with standard additions, decreases of recoveries were sometimes observed for 0.1% (m/v) NaOH, and attained 13.8% in the most unfavourable case. The final accuracy of the method was verified by using two certified reference materials: CRM 402 (white clover) and CRM 279 (sea lettuce). No statistically significant differences were obtained between the measured concentrations and the certified values. The optimized method was found sensitive (detection limit 0.15 μg l⁻¹), reliable and repeatable (R.S.D. between 1.3% and 4.0%).     

Synthesis and Characterization of ASnOAsO4(A = K and Rb)

Crystals of two alkali-metal tin(IV) arsenates, KSnOAsO₄ and RbSnOAsO₄, were grown from a flux and structurally characterized by single-crystal X-ray diffraction. Crystal data: RSnOAsO₄, orthorhombic, Pna2₁ (No. 33), a = 13.406(3) Å, b = 6.678(1) Å, c = 10.921(2) Å, Z = 8, R = 0.037 for 1173 independent reflections with I > 2.5ó(l); RbSnOAsO₄, as above except a = 13.567(3) Å, b = 6.791( 1) Å, c = 10.891(2) Å, R = 0.035 for 1958 independent reflections. The two compounds are isostructural with the nonlinear optical material KTiOPO₄. The oxygen frameworks of both tin compounds approximate closely to a centrosymmetric arrangement, as indicated from the analysis of atomic coordinates. Second harmonics were generated in powdered RbSnOAsO₄ to confirm the absence of a center of symmetry in the structure.     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.