Fabrication and characterization of glutathione-responsive nanoparticles from the disulfide bond-bridged block copolymer

The purpose of this paper is to fabricate novel nanoparticles (NPs) from a single disulfide bond-bridged block copolymer poly(hydroxyethyl methacrylate)-S-S-polycaprolactone (PHEMA-S-S-PCL). The novel biomaterial was synthesized by ring-opening polymerization and reversible addition–fragmentation chain transfer polymerization. The cargo-free NPs were fabricated with the solvent evaporation method, and studies on NPs' characterizations were carried out. The hydrogen nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy spectra confirmed the synthesis of PHEMA-S-S-PCL copolymer. Thermo-gravimetric analysis curves indicated that the obtained PHEMA-S-S-PCL copolymer had good thermostability. Transmission electron microscopy and dynamic light scatter results suggested that the cargo-free NPs were in round shapes with an average diameter of 103.6 ± 0.12 nm. The low critical micelle concentration of cargo-free NPs (7.9 × 10^?4 mg/ml) indicated that these NPs would keep their spherical shapes after being attenuated by abundant liquid (e.g., blood or body fluid). Furthermore, these NPs showed high stability at the presence of bovine serum albumin. Therefore, it could be speculated that these NPs would not be absorbed by proteins in blood, and they could be used as a candidate carrier for drug delivery.     

Fabrication of Alginate-Based O/W Nanoemulsions for Transdermal Drug Delivery of Lidocaine: Influence of the Oil Phase and Surfactant

Transdermal drug delivery of lidocaine is a good choice for local anesthetic delivery. Microemulsions have shown great effectiveness for the transdermal transport of lidocaine. Oil-in-water nanoemulsions are particularly suitable for encapsulation of lipophilic molecules because of their ability to form stable and transparent delivery systems with good skin permeation. However, fabrication of nanoemulsions containing lidocaine to provide an extended local anesthetic effect is challenging. Hence, the aim of this study was to address this issue by employing alginate-based o/w nanocarriers using nanoemulsion template that is prepared by combined approaches of ultrasound and phase inversion temperature (PIT). In this study, the influence of system composition such as oil type, oil and surfactant concentration on the particle size, in vitro release and skin permeation of lidocaine nanoemulsions was investigated. Structural characterization of lidocaine nanoemulsions as a function of water dilution was done using DSC. Nanoemulsions with small droplet diameters (d < 150 nm) were obtained as demonstrated by dynamic light scattering (DLS) and cryo-TEM. These nanoemulsions were also able to release 90% of their content within 24-h through PDMS and pig skin and able to the drug release over a 48-h. This extended-release profile is highly favorable in transdermal drug delivery and shows the great potential of this nanoemulsion as delivery system.     

Synthesis and characterization of folic acid‐modified carboxymethyl chitosan‐ursolic acid targeted nano‐drug carrier for the delivery of ursolic acid and 10‐hydroxycamptothecin

Carboxymethyl chitosan (CMCS), as a water‐soluble, biocompatible, and biodegradable polymer, is an excellent carrier for a sustained drug delivery system. In this study, a amphiphilic carboxymethyl chitosan‐ursolic acid nano‐drug carrier modified by folic acid (FPCU) were prepared, and then the nano‐drug carrier wrapped another anticancer drug 10‐hydroxycamptothecin were self‐assembled into nanoparticles (FPCU/HCPT NPs). The FPCU/HCPT NPs had a suitable size, high drug loading efficiency of ursolic acid (6.4%) and 10‐hydroxycamptothecin (14.1%). The drug release study in vitro indicated that the nanoparticles have obviously sustained effect and pH sensitive behaviors, the drug release amount was higher at pH 5.5 than at pH 7.4. in vitro and in vivo study showed that the nanoparticles displayed a high antitumor efficiency to tumor cells compared with free drug. The nano delivery system as a carrier for ursolic acid (UA) and 10‐hydroxycamptothecin (HCPT) has good application prospects in cancer treatment.     

Fungal keratitis infected eye treatment with antibiotic-loaded zinc ions tagged polyvinyl acetate phthalate-g-polypyrrole drug carrier

Currently, the treatment of fungal keratitis (FK) infection remains a major clinical challenge, and current investigations, development in the field have widened approaches. The present work was aimed to synthesis a dual role novel carrier system consisting of Ofloxacin (OFL) and Nepafenac (NF) hydrophobic drugs incorporated in Zinc ions (Zn²⁺) tagged Polyvinyl acetate phthalate (PVAP) grafted Polypyrrole (PPy) carrier (OFL&NF-Zn²⁺/PVAP-g-PPy) to treat FK infection. The FT-IR, SEM, and dynamic light scattering revealed the carrier chemical structure, spherical shape, and the average particle size of 691.3 ± 1 nm. The carrier’s entrapment of OFL and NF drugs has been observed at 78.23% and 60.03%. The carrier exhibited significant antifungal activity at the concentration of 58 mg mL⁻¹ against Candida albicans which was lower than that of the free ofloxacin. The cell viability results suggested up to 70 μg/mL concentration of OFL&NF-Zn²⁺/PVAP-g-PPy did not induce any cytotoxicity on cultured ADSC cells at 48 h treatment time. It confirms the fact that the OFL&NF-Zn²⁺/PVAP-g-PPy carrier showed good biocompatibility and good anti-fungal activity. Thus the carriers provide a significant potential to improve the bioavailability of topically applied drugs to treat fungal eye infection.     

The Influence of Dopant Concentration on Optical-Electrical Features of Quantum Dot-Sensitized Solar Cell

In this study, TiO₂/CdS/Cd_xCu_1−xSe, TiO₂/CdS/Cd_xMn_1−xSe, and TiO₂/CdS/Cd_xAg_2−2xSe thin films were synthesized by chemical bath deposition for the fabrication of photoanode in quantum-dot-sensitized solar cells. As a result, the structural properties of the thin films have been studied by X-ray diffraction, which confirmed the zinc Blende structure in the samples. The optical films were researched by their experimental absorption spectra with different doping concentrations. Those results were combined with the Tauc correlation to estimate the absorption density, the band gap energy, valence band and conduction band positions, steepness parameter, and electron–phonon interaction. Furthermore, the electrical features, electrochemical impedance spectrum and photocurrent density curves were carried out. The result was used to explain the enhancing performance efficiency.     

Acceleration and mitigation of carrier‐induced degradation in p‐type multi‐crystalline silicon

Recently, a new carrier‐induced defect has been reported in multi‐crystalline silicon (mc‐Si), and has been shown to be particularly detrimental to the performance of passivated emitter and rear contact (PERC) cells. Under normal conditions, this defect can take years to fully form. This Letter reports on the accelerated formation and subsequent passivation of this carrier‐induced defect through the use of high illumination intensity and elevated temperatures resulting in passivation within minutes. The process was tested on industrial mc‐Si PERC solar cells, where degradation after a 100 hour stability test was suppressed to only 0.1% absolute compared to 2.1% for non‐treated cells. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Spectral probing of carrier traps in Si–Ge alloy nanocrystals

Photogenerated carriers in Si–Ge alloy nanocrystals (NCs) prepared by co‐sputtering method were investigated by mean of transient induced absorption. The carrier relaxation features multiple components, with three decay life times of τ ≈ 600 fs, 12 ps, and 15 ns, established for Si_0.2Ge_0.8 alloy NCs of a mean crystal size of 9 nm and standard deviation of 3 nm. Deep carrier traps, identified at the boundary between the NCs and the SiO₂ host with the ionization energy of about 1 eV, are characterized by a long‐range Coulombic potential. These are responsible for rapid depletion of free carrier population within a few picoseconds after the excitation, which explains the low emissivity of the investigated materials, and also sheds light on the generally low luminescence of Si/Ge and Ge NCs. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Charge transport in anodic TiO2 nanotubes studied by terahertz spectroscopy

We report on the photoelectrochemical and terahertz measurements, of the charge transport properties of 1 μm thick self‐organized TiO₂ nanotube layers, prepared by the anodization of titanium. We provide evidence regarding the complexity of electron transport, and dynamics in the nanotubes. Shortly after photoexcitation, charge mobilites in amorphous and crystalline nanotubes are similar, but still lower compared to the bulk anatase. The mobility subsequently decreases due to trapping‐detrapping processes. The recombination rate in anatase nanotubes is much slower than in the amorphous ones, enabling the material to reach an internal photon to electron conversion efficiency exceeding 60%.     

拓展光催化材料光谱响应的研究进展

光催化技术在解决能源短缺和环境污染问题方面有重要的应用前景,引起了人们的广泛关注。宽光谱响应和高量子效率是实现光催化材料大规模应用的前提。本文介绍了近年来紫外、可见和近红外光催化方面的最新进展,阐述了拓展光响应范围和促进载流子分离的有效途径,总结了光催化材料发展所面临的问题,并对其发展趋势进行了展望。     

连动型抗干扰干涉具井下瓦斯浓度监测系统（英文）

针对井下甲烷浓度监控干扰大的问题,结合实时监测甲烷浓度的系统要求,设计角镜连动的自消震光学结构,构建了基于无线网络的实时数据通信系统.在干涉系统中,固定两个角镜位置,将两片半透半反镜用连杆结构同步旋转,由此产生光程差.由于采用了连杆结构,任意时刻引入的震动在两个分束镜上等量存在,其结果是差分值,可实现完全相消.由分析分束器的最大旋转范围计算得到系统的光程差变化范围.结合比尔朗伯定律,给出系统在井下工作的甲烷气体浓度最低检出限.分别在实验室及矿井主巷道中完成实验过程,通过化学反应法求得被测甲烷气体的标准浓度,与WQF530型光谱分析仪的测试结果作比较,结果表明:在实验室无干扰条件下,两种检测方法的相对误差均小于1.0%;在井下实验中,传统光学检测方法受环境影响明显,相对误差大幅增加,而本系统测试结果基本稳定,具有较强的抗干扰能力及较高的稳定性.