Shipboard analysis of picomolar levels of manganese in seawater by chelating resin concentration and chemiluminescence detection

A new shipboard analytical method for determining picomolar levels of manganese in seawater has been developed. The method is based on a combination of chelating resin column extraction and improved chemiluminescence (CL) detection in a closed flow system. In this method, manganese in sample solution is selectively collected on newly-developed iminodiacetate-immobilized chelating resin, and then eluted with acidic solution containing hydrogen peroxide. The resulting eluent is mixed with luminol solution and aqueous ammonia after removal of iron ions by a chelating resin column, and then the mixture is introduced into the CL cell. The manganese concentration is obtained from the CL intensity. The detection limit (3SD) of manganese is 5 pmol L^–1 from 9 mL of seawater sample. The method was applied to seawater samples collected at the Okinawa Trough.     

高吸水树脂的溶胀动力学

基于扩散-松弛模型,分别研究了树脂粒度和溶液浓度对高吸水树脂溶胀行为的影响。实验结果表明:水分子的扩散和树脂大分子链段的松弛对树脂的溶胀均有贡献,但两者贡献大小与树脂粒度和溶液浓度有关。     

A PVC-based pentathia-15-crown-5 membrane potentiometric sensor for mercury(II)

Poly(vinyl chloride) (PVC)-based membrane of pentathia-15-crown-5 exhibits good potentiometric response for Hg²⁺ over a wide concentration range (2.51 × 10⁻⁵ to 1.00 × 10⁻¹ mol dm⁻³) with a slope of 32.1 mV per decade of Hg²⁺ concentration. The response time of the sensor is as fast as 20 s. The electrode has been used for a period of six weeks and exhibits fairly good discriminating ability towards Hg²⁺ in comparison to alkali, alkaline and some heavy metal ions. The electrode can be used in the pH range from 2.7 to 5.0.     

Homooxacalix[3]arene Derivatives as Ionophores for Serotonin‐Selective Membrane Electrodes

Homooxacalix[3]arene derivatives are effective ionophores for constructing serotonin‐selective membrane electrodes. An electrode based on one of the derivatives, tris(methoxyphenylpropyloxy)hexahomooxacalix[3]arene‐triethyl ether, with potassium tetrakis(p‐chlorophenyl)borate (20 mol% relative to the ionophore) as an ionic additive and bis(2‐ethylhexyl) sebacate as a solvent mediator in a poly(vinyl chloride) membrane matrix, displayed much better selectivity for serotonin than for various organic ammonium ions and inorganic cations. The electrode exhibited a near‐Nernstian response to serotonin in the concentration range of 2×10^?4 to 1×10^?2 M with a slope of 56.4 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM Na₂HPO₄/NaH₂PO₄ (pH 7.4). The limit of the detection was 8×10^?5 M. The selectivity pattern of this electrode was quite different from that of an electrode using calix[6]arene‐hexaacetic acid hexaethyl ester, a well‐known ionophore for primary organic ammonium ions, which did not induce an enhanced response to serotonin. The developed electrode was used for the active loading of serotonin in liposomes induced by transmembrane pH gradients.     

Novel aromatic carboxamides from dehydroabietylamine as potential fungicides: Design,synthesis and antifungal evaluation

The present study was carried out to design and synthesize a number of novel aromatic carboxamide derivatives of dehydroabietylamine. The preliminary antifungal assay indicated that most of title compounds displayed moderate to good antifungal activity toward the six fungal strains in vitro. Compounds 3i, 3q, 4b and 4d showed significant antifungal activity against Sclerotinia sclerotiorum, with EC₅₀ values ranging from 0.067 ～ 0.393 mg/L. Compounds 3i, 4b and 4d also showed pronounced mycelial growth inhibition activities against B. cinerea and A. solani. Furthermore, in the in vivo assay, compound 4b exhibited brilliant protective activity against S. sclerotiorum-infected rape leaves. Meanwhile, the in vivo bioassay on tomato plants infected by B. cinerea showed that compound 3i and 4d displayed excellent protective activity at 200 mg/L, which were near to boscalid. Primary mechanistic study revealed that 4b could inhibit sclerotia formation as well as reduce the exopolysaccharide level. SEM and TEM analysis indicated that 4b possessed a strong ability to destroy the surface morphology of mycelia, cell structure and seriously interfere with the growth of the fungal pathogen. In addition, 4b exhibited good inhibitory activity (IC₅₀ = 23.3 ± 1.6 μM) toward succinate dehydrogenase (SDH). Molecular modeling study confirmed the binding modes between compound 4b and SDH. The above antifungal results and fungicidal mechanism study revealed that this class of dehydroabietylamine derivatives could be potential SDH inhibitors and lead compounds for novel fungicides development.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

A novel non-invasive electrochemical biosensing device for in situ determination of the alcohol content in blood by monitoring ethanol in sweat

A non-invasive, passive and simple to use skin surface based sensing device for determining the blood's ethanol content (BAC) by monitoring transdermal alcohol concentration (TAC) is designed and developed. The proposed prototype is based on bienzyme amperometric composite biosensors that are sensitive to the variation of ethanol concentration. The prototype correlates, through previous calibration set-up, the amperometric signal generated from ethanol in sweat with its content in blood in a short period of time. The characteristics of this sensor device permit determination of the ethanol concentration in isolated and in continuous form, giving information of the BAC of a subject either in a given moment or its evolution during long periods of time (8 h). Moreover, as the measurements are performed in a biological fluid, the evaluated individual is not able to alter the result of the analysis. The maximum limit of ethanol in blood allowed by legislation is included within the linear range of the device (0.0005–0.6 g L⁻¹). Moreover, the device shows higher sensitivity than the breathalyzers marketed at the moment, allowing the monitoring of the ethanol content in blood to be obtained just 5 min after ingestion of the alcoholic drink. The comparison of the obtained results using the proposed device in the analysis of 40 volunteers with those provided by the gas chromatographic reference method for determination of BAC pointed out that there were no significant differences between both methods.     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

Surface effects in the deformation of an anisotropic elastic material with nano-sized elliptical hole

We examine the effect of surface energy on an anisotropic elastic material weakened by an elliptical hole. A closed-form, full-field solution is derived using the standard Stroh formalism. In particular, explicit expressions for the hoop stress, normal, in-plane tangential and out-of-plane displacement components along the edge of the hole are obtained. These expressions clearly demonstrate the effect of elastic anisotropy of the bulk material on the corresponding field variables. When the material becomes isotropic, the hoop stress agrees with the well-known result in the literature while both the in-plane tangential and out-of-plane displacements vanish and the normal displacement is constant along the entire boundary of the elliptical hole.