High‐performance segmented polyurea by transesterification of diphenyl carbonates with aliphatic diamines

In an effort to develop a green process for the production of elastomeric polyurethane–urea (PUaE) through a nonisocyanate route, a highly practical method was found using diphenyl carbonate (DPC) instead of diisocyanate as the carbonylation agent. The transesterification of aliphatic diamines in a solvent such as tetramethylene sulfone (TMS) with DPC results in a new process obtaining new segmented PUaE with high molecular weights and excellent mechanical performance. The key to the present success lies in the timing and sequence of the diamine addition forming initial carbamate intermediates in situ and then in shifting the equilibrium toward polyurea product formation by phenol removal from the TMS solution so that high‐molecular‐weight polyurea could be formed favorably. The most optimized polyurea films made in this study has a η_inh of 0.64, with high‐performance characteristics showing tensile strength of greater than 30 MPa and elongation exceeding 400% with decomposition temperature (5%) of >280 °C. Well‐defined soft‐ and hard‐segment domains were observed for the products as determined by atomic force microscope. This new improved process to produce segmented polyurea thereby complies fully with the principles of green chemistry using readily available chemicals. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2781–2790     

Synthesis of substituted 1,1′-diaminoferrocenes from cyclo-2-pentene imines

Condensation of anilines and primary aliphatic amines with 3,4-diphenylcyclo-2-pentenone leads to the corresponding diphenylcyclopentene imines in good yields of 72-90%. Deprotonation of these aminocyclopentadiene tautomers and reaction with FeCl₂ leads to the synthesis of the respective 1,1′-diamino-3,3′,4,4′-tetraphenylferrocenes. Yields increase from 33% to 65% with a decrease in the steric bulk of the amine substituent. The observation that a successful conversion requires two equivalents of base is conceived on the basis of the discussed reaction mechanism. The molecular structure of 1,1′-dianilino-3,3′,4,4′-tetraphenylferrocene (3a), which was determined by single crystal X-ray analysis reveals a trans coordination of the two amine moieties with respect to the central Cp-Fe-Cp axis of the ferrocenyl backbone.     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。     

A Mixed Solvothermal Route to Synthesis of Dice‐Like PbS

The authors developed a simple solvothermal route to synthesis of PbS nanocrystals in the mild binary mixed solvent made of diethylenetriamine (DETA) and water. Two kinds of PbS nanostructures (dice‐like and cubic) have been successfully synthesized in the binary mixed solvothermal system at 150 °C by changing the sulfur source. The products were characterized by X‐ray diffraction (XRD), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The results show that the as‐prepared dice‐like PbS crystals have a hole on each of their faces. To elucidate the relationship between reaction systems and the morphologies of the final products, the authors also investigated the crystal growth by using different sulfur source. Based on the experimental results, the possible growth mechanism of the dice‐like PbS crystals was proposed.     

聚乙烯醇辅助合成CdS纳米线及其表征

以聚乙烯醇为辅助剂, 使用溶剂热法成功制备CdS纳米线, 并用XRD、TEM、HRTEM、UV-Vis和PL(荧光)发射谱等方法对样品进行表征. 结果表明, 该法制备的CdS纳米线为六方纤锌矿结构, 直径为70 nm, 长约10 μm, 沿[001]晶向择优生长, 具有量子禁域效应. 同时, 根据对比实验结果提出了CdS纳米线的聚合物辅助生长机理.     

CeOHCO3和CeO2束状纳米结构的制备及表征

The cantaloupe-like particles of CeOHCO₃ were synthesized in aqueous solution by using cetyltrimethylammonium bromide (CTAB) as soft template. Then, the bunchiness rods of CeO₂ were obtained by calcining CeOHCO₃ at 450 ℃. The results of thermogravimetric/differential thermal analysis reveal that an endothermic reaction with decomposition is involved in the transformation process from CeOHCO₃ to CeO₂. By scanning electron microscopy and X-ray diffraction analysis, it is found that the orthorhombic phase CeOHCO₃ particles are constituted of short nanorods with diameters ranging from several tens nm to over 100 nm, and the cubic phase CeO₂ rods are composed of small particles with diameter ca. 15 nm. From the results of UV-Vis absorption and photoluminescence analysis, it is found that the CeO₂ possess abundant defects, and the band gaps of the CeO₂ and CeOHCO₃ are ca. 2.70 eV and 3.87 eV, respectively.     

溶剂热法制备八面体纳米结构四氧化三铁

利用乙二醇溶剂热法成功制备了八面体结构四氧化三铁,利用场发射扫描电子显微镜、透射电子显微镜、选区电子衍射仪、X射线衍射仪及超导量子干涉仪分析了合成产物的形貌、晶体结构及磁学性能,并探讨了多种实验条件对纳米结构形成的影响.结果表明所得八面体四氧化三铁纳米晶粒径均一,棱边尺寸约为120nm,室温下显示铁磁性质.     

Thermal conversion of poly(paraphenylene–vinylene) precursor films: XPS and ESR studies

The conversion of the precursor into poly(phenylene–vinylene) (PPV) was studied by means of photoelectron spectroscopy (XPS) and electron spin resonance (ESR) on precursor films synthesized from the polymerization of pxylene-tetrahydrophenium halides. The sulfonium precursor containing chlorine or bromine was thermally converted to PPV and analyzed in situ using the spectrometers. It was found by XPS analysis that both halide precursors were thermally converted into polymer in a range of 190–250°C but traces of bromine were still present at >300 °C in the precursor containing Br. Furthermore, a small amount of oxygen in a ketone structure was also present in fully converted films. The ESR results corroborated the XPS experiments, showing a progressive disappearance of the radical distribution related to sulfur sites in a comparable temperature range. A discussion of the conversion process is given in terms of the modification of the core level spectra from XPS and the g distributions from ESR experiments. © 1997 John Wiley & Sons, Ltd.     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO₂纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO₂纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

高活性氧化亚铜薄膜材料的绿色合成研究

本文采用一步脉冲雾化化学气相沉积法在250℃下制备了氧化亚铜薄膜催化剂.实验研究了前驱体中掺杂水对氧化铜薄膜表面形貌、拓扑结构、表面成分和光学特性的影响规律.结果表明所制得的催化剂为纯相的氧化亚铜.前驱体溶液中掺杂水会导致氧化亚铜的晶粒变小,从而使得共光学能隙从2.16 eV降至2.04 eV.原子力显微镜结果表明随着水的加入,氧化亚铜的表面粗糙度降低,表面更加均匀.此外,利用密度泛函理论计算得到了水和乙醇在氧化亚铜薄膜表面的吸附和反应特性,并提出了氧化亚铜的形成机理.本文开发了一种低成本且实际可行的薄膜制造方法,该方法在太阳能电池和半导体等领域具有潜在应用.