Photochemistry of nonconjugated bichromophoric systems III. Synthesis and photoreaction of poly(ethylene glycol) biscoumarinyloxyacetates

A series of poly(ethylene glycol) biscoumarinyloxyacetatea have been synthesized and their intramolecular photochemical cyclodimerizations have been studied. It was found that only syn-HT configuration products were obtained when these bisesters were directly irradiated in chloroform, and the yields of the products decreased with the increase of the chain length. This photocyclization reaction is a convenient and effective method to synthesize macrocyclic compounds.     

用TMS—2型热机分析仪测量热释蠕变

对已经商品化的Perkin-Elmer TMS-2型热机分析仪进行改进,用来测量聚合物材料的热释蠕变行为。按照7SCr分步加载的程序,用弯曲法测量了-83～300℃温度范围内低密度聚乙烯的玻璃化转变松弛过程,并从TSCr谱上计算其相应的分子参数,实验结果与用扭转的TSCr方法所得结果相等,因此这是一种研究聚合物材料松弛行为的方便可行的技术。     

Crystallization behavior and biodegradation of poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers

Block copolymerization by using isocyanates is an effective method for incorporating PHB and PEG because it can prepare copolymers with good properties, such as toughness, strength, and so on. In this study, we adopted soil suspension system to estimate the biodegradability of a series of PHB/PEG multiblock copolymers with different compositions and block lengths. In the degradation process, the changes in weight loss, molecular weight, and tensile strength were periodically measured to determine the biodegradability, and the surface morphology was also observed by SEM. In contrast to pure PHB, the weight loss of the copolymer was relatively lower. On the other hand, the tensile strength and molecular weight experienced apparent decrease, and for BHG1000-3-1, they reached 46.7% and 77.7% of the initial value, respectively. SEM observation showed that the surface was covered with numerous erosion pits. All these indicate that the degradation indeed took place and long-chain molecules have been hydrolyzed into shorter ones. The crystallization behavior was also investigated by DSC and WAXD. The results showed that both the segments, PEG and PHB, can form crystalline phases at lower PHB contents ranging from 29% to 44%, and when PHB component was more than 60%, only PHB phase can crystallize.     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

三氟化硼引发四氢呋喃聚合的研究——Ⅳ.1,4-丁二醇的影响

前报中已证明用三氟化硼-环氧氯丙烷(ECH)引发四氢呋喃(THF)聚合具有较高的引发效率,并对在Ac_2O、水和无水存在下的聚合反应进行了研究。本文报道1,4-丁二醇(BG)对BF_3引发THF聚合反应的影响。通常认为在BG存在下,BF_3是不能引发THF聚合的,但本工作证明BG是有效的分子量调节剂,制备分子量在     

Reactions of trialkylalanes with cyclic acetals and orthoformates in CH2Cl2 and ClCH2CH2Cl as solvents

Under mild conditions, trialkylalanes (Et₃Al and Buⁱ ₃Al) in chlorine-containing solvents (CH₂Cl₂ or ClCH₂CH₂Cl) react with cyclic acetals and orthoformates to form glycol monoethers and dialkylacetals, respectively, in high yields. The ¹H NMR spectroscopic data demonstrate that CH₂Cl₂ or ClCH₂CH₂Cl interacts with Buⁱ ₃Al.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

联萘冠醚的合成新方法

一种用于合成含联萘基冠醚的新方法。以消旋，手性联萘酚为起始原料，先与氯乙醇反应制得2,2'-二（2－羟基乙氧基）－1,1'－联二苯，再与二甘醇或三甘醇对二对甲苯磺酸酯反应，成功制得了4种联萘冠醚。     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.