超短脉冲超强激光与固体靶相互作用中高能离子的产生

 用2D3V PIC粒子模拟方法得到了超短脉冲超强激光与固体靶相互作用中高能离子产生的图像，并对其机理进行了研究。在靶前后表面都观察到了高能离子的产生，并诊断了离子能谱。模拟结果表明，在靶前表面所产生的高能离子，角分布较大，在向靶内输运过程中会损失能量；在靶后表面产生的高能离子，定向性很好，能获得很高的能量。模拟得到的离子能量和实验观测结果在量级上相符。     

氩离子激光器输出光功率稳定度与光反馈应用

通过实验观测氩离子激光器工作电流与输出光功率及其稳定性之间的关系，采用光反馈解决了反馈工作点的设置和跟踪调解，使输出光功率稳定性得到明显提高。     

含三正辛胺微胶囊对六价铬的富集

本文将对六价铬有效的萃取剂ＴＯＡ（三正辛胺）微胶囊化，制成填充柱型的酸性体系六价铬的富集分离装置。实验结果表明，微胶囊填充柱中每毫升ＴＯＡ对六价铬的最大萃取容量为１５８．０ｇ／ｍＬ，为纯ＴＯＡ液相萃取的４．９倍。微胶囊经碱／水洗涤后，可再生使用。     

量子计算与超冷离子

通过介绍量子计算的基本概念和特点，并对比目前人们使用的计算机的计算方式，对于如何利用囚禁在离子阱中的超冷离子进行量子计算作了简要的叙述．     

HoYb:YVO4的上转换发光研究

研究了960nm激光激发下HoYb双掺钒酸钇晶体HoYb:YVO4的直接上转换增敏发光,发现了Ho3+离子的上转换发光现象,HoYb:YVO4晶体的上转换发光是5F5→5I8最强,而5S2→5I8相对小了一个数量级,这是由于YVO4晶体既有很强的振子强度又有很大的多声子无辐射弛豫造成的. 关键词： 上转换发光 直接增敏(敏化) 钒酸钇YVO4晶体 Ho3+离子     

Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

The Transport Properties of the Cell Membrane Ion Channels in Electric Fields: Bethe Lattice Treatment

The interactive two-state model of cell membrane ion channels in an electric field is formulated on the Bethe lattice by means of the exact recursion relations. The probability of channel opening or maximum fractions of open potassium and sodium channels are obtained by solving a non-linear algebraic equation. Using known parameters for the conventional mean-field theory the model gives a good agreement with the experiment both at low and high trans-membrane potential values. For intermediate voltages, the numerical results imply that collective effects are introduced by trans-membrane voltage.     

离子束合成钇硅化物的结构及红外谱特征

将稀土金属钇离子注入到n型单晶Si(111)中制备出钇硅化物埋层.利用x射线衍射、卢瑟福背散射和傅里叶红外吸收谱测量分析了样品的结构、原子的埋层分布和振动模式.结果表明，Y离子在注入过程中已与基底中的Si原子形成了YSi2结构相.真空下的红外光辐照处理促使YSi2择优取向生长，埋层中Si与Y的平均原子浓度比由24下降为20，与六方YSi2的化学计量比一致.还给出了钇硅化物的特征红外吸收谱.     

Effect of secondary electrons from latent tracks created in YBCO by swift heavy ion irradiation

Swift heavy ions (SHI) with electronic energy loss exceeding a value of 14.4 keVnm⁻¹ create amorphized latent tracks in YBCO type superconductors. In the low fluence regime of an ion beam where tracks do not overlap, a decrease of the superconducting transition temperature as probed through resistivity studies, is not expected due to availability of percolating current paths. The present study however shows T_c decrease by about 1–3 K in thin films of YBCO when irradiated by 250 MeVAg ions at 79 K at a fluence of 5×10¹⁰–1×10¹² ionscm⁻². The highest fluence used in the present study is three times less than the fluence where track overlapping becomes significant. The T_c tends to increase towards the preirradiation value on annealing the films at room temperature. To explain this unusual result, we consider the effect of ion irradiation in inducing materials modification not only through creation of amorphized latent tracks along the ion path, but also through creation of atomic disorder in the oxygen sublattice in the Cu–O chains of YBCO by the secondary electrons. These electrons are emitted radially from the tracks during the passage of the SHI. Considering the correlation between the charge state of copper and its oxygen coordination, we show in particular that the latter process is a consequence of the inelastic interaction of the SHI induced low-energy secondary electrons with the YBCO lattice, which result in chain oxygen disorder and T_c decrease.     

Si微电阻桥温度分布与热传导特性的显微Raman光谱研究

采用显微Raman光谱方法对红外目标模拟器中重掺杂Si微电阻桥单元的热传导特性进行研究，根据Si桥的实际特性建立相应的Raman散射模型，通过测量Raman峰位的移动得到高功率激光辐照下测量点的温度.对Si桥桥面分别进行了沿某些特殊线段的逐点线扫描和覆盖全部桥面的面扫描，得到各点的温升及其分布.用基于有限元分析的软件结合Si桥结构参数对各测量点的温升进行了模拟计算，其结果在热导分布的基本趋势上与实验相一致.实验细致地揭示了热导分布的局域起伏，反映出实际器件的不均匀性，为改进器件设计、优化器件性能提供了实验依据. 关键词： Raman光谱 Si桥 温度分布 热导