Variation of the electronic properties of zigzag boron nitride nanotubes by Al-doping: a DFT study

Boron nitride nanotubes (BNNTs) are semiconductors with a wide band gap. In comparison with carbon nanotubes (CNTs), BNNTs have higher chemical stability, excellent mechanical properties and higher thermal conductivity. In this paper, we study the effect of diameters and substituting B and N atoms of various zigzag BNNTs with Al, on structural and electronic properties of BNNTs in solid state using the density functional theory method. The results of calculations of density of states and band structure (band) showed that the band gap between the valence and conduction level increases as a result of the enhancement of tube diameter of BNNTs. Finally, the results showed that the electronic properties of the pristine BNNTs can be improved by doping Al atom in the zigzag configuration of tubes.     

Hydrogen adsorption on Pt-decorated closed-end armchair (3,3), (4,4) and (5,5) single-walled carbon nanotubes

ABSTRACT

Structures of small lengths of capped (3,3), (4,4) and (5,5) single-walled carbon nanotubes (SWCNTs) and their structures decorated by Pt atom and Pt_n clusters (n = 2–4) were obtained using density functional theory calculations. Binding abilities of Pt atom and Pt_n clusters on the outer surface of SWCNTs at various adsorption sites were explored. Adsorptions of H₂ onto Pt atom of the Pt-decorated (3,3), (4,4) and (5,5) SWCNTs were studied and their adsorption energies are reported. The thermodynamic properties and equilibrium constants for H₂ adsorptions on the Pt₄-decorated (3,3), (4,4) and (5,5) SWCNTs were obtained. The adsorption of H₂ on the Pt atom of the Pt₄/(3,3) SWCNT was found to be the most preferred reaction of which enthalpy and free energy changes at room temperature are ?46.61 and ?23.99 kcal/mol, respectively.     

Rheological and Mechanical Characterization of Multi-Walled Carbon Nanotubes/Polypropylene Nanocomposites

The rheology and morphology of multi-walled carbon nanotube (MWNT)/polypropylene (PP) nanocomposites prepared via melt blending was investigated. The minor phase content of MWNT varied between 0.25 and 8 wt%. From morphological studies using a scanning electron microscopy technique a good dispersion of carbon nanotubes in the PP matrix was observed. The rheological studies were performed by a capillary rheometer, and mechanical properties of the nanocomposites were studied using a tensile and flexural tester. Both PP and its nanocomposites showed non-Newtonian behavior. At low shear rates the addition of MWNT content causes an increase in viscosity; however, viscosity is less sensitive to addition of MWNT content at higher shear rates. Flow activation energy for the nanocomposites was calculated using an Arrhenius type equation. From this calculation it was concluded that the temperature sensitivity of nanocomposites was increased by increasing of nanotube content. An increase in tensile and flexural moduli and Izod impact strength was also observed by increasing the MWNT content. From rheological and mechanical tests it was concluded that the mechanical and rheological percolation threshold is at 1.5 wt%.     

Studies on the Nonisothermal Crystallization Behavior of Polypropylene/Multiwalled Carbon Nanotubes Nanocomposites

Polypropylene/multiwalled carbon nanotubes (PP/MWNTs) nanocomposites were prepared by a melt compounding process. The morphology and nonisothermal crystallization of these nanocomposites were investigated by means of optical microscopy, scanning electron microscopy, and differential scanning calorimetry. Scanning electron microscope micrographs of PP/MWNTs composite showed that the MWNTs were well dispersed in the PP matrix and displayed a clear nucleating effect on PP crystallization. Avrami theory, modified by Jeziorny and Mo's method, was used to analyze the kinetics of the nonisothermal crystallization process. It was found that the addition of MWNTs improved the crystallization rate and increased the peak crystallization temperature of the PP/MWNTs nanocomposites as compared with PP. The results show that the Jeziorny theory and Mo's method successfully describe the nonisothermal crystallization process of PP and PP/MWNTs nanocomposites.     

Investigation of the Morphological and Mechanical Properties of Polyethylene Terephthalate (PET)/Ethylene Propylene Diene Rubber (EPDM) Blends in the Presence of Multi-Walled Carbon Nanotubes

In this study the blends of polyethylene terephthalate (PET)/ethylene propylene diene rubber (EPDM) in the presence of multi-walled carbon nanotubes (MWCNT) (1 and 3?wt %) were prepared by melt compounding in an internal mixer. Mechanical and morphological properties of the nanocomposites were investigated. The thermal behaviors of the PET/EPDM nanocomposites were also investigated, by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results of the mechanical tests showed that the tensile strength, elastic modulus and the hardness of the blends were increased with increasing CNT, while the impact strength and elongation at break decreased. The DSC and TGA results showed an increase of melting temperature (T_m) and degradation temperature of the nanocomposites with the addition of the carbon nanotubes, because the carbon nanotubes serve both as nucleating agents to increase T_m and prevent the composite from degradation to increase the thermal stability. The microstructure of the composites was evaluated through field emission scanning electron microscopy (FESEM) and the results showed a good distribution of the MWCNT within the polymer blend.     

碳纳米管的可控长度拾取及导电性分析

拾取指定长度的半导体性碳纳米管对大规模制造碳纳米管场效应管具有重要意义.本文提出了一种利用原子力显微镜探针和钨针对碳纳米管进行可控长度拾取的方法并进行了碳纳米管导电性分析.在扫描电子显微镜下搭建微纳操作系统,针对切割操作过程中原子力显微镜探针、钨针和碳纳米管的接触情况进行了力学建模和拾取长度误差分析.建立了单根金属性碳纳米管、单根半导体性碳纳米管及碳纳米管束与钨针接触的电路模型,推导了接入不同性质碳纳米管后电路的电流电压特性方程.使用原子力显微镜探针对碳纳米管的空间位姿进行调整,控制钨针对碳纳米管上目标位置进行通电切割,同时获取切割电路中的电流电压数据.实验结果表明,本文提出的方法能够有效控制所拾取碳纳米管的长度,增加碳纳米管与原子力显微镜探针的水平接触长度能够减小碳纳米管形变导致的拾取长度误差,建立的电流电压特性方程能够用于分析碳纳米管的导电性.     

多壁碳纳米管分散固相萃取结合在线GPC/GC-MS/MS技术同时检测茶叶中40种有机磷农药

建立了一种以多壁碳纳米管(MWCNTs)为分散固相萃取吸附剂的前处理净化技术,结合在线凝胶色谱/气相色谱-三重四极杆串联质谱(GPC/GC-MS/MS)同时测定茶叶中40种有机磷农药残留的方法。茶叶用乙腈提取,经MWCNTs净化后进行GPC/GC-MS/MS分析。利用该方法对空白茶叶样品进行20、50、150μg/kg 3个不同浓度水平的加标回收试验,平均回收率为84.2%~109.9%,相对标准偏差(RSD,n=6)不大于8.9%,方法检出限为0.5~4.6μg/kg。该方法快速简便、灵敏度高、成本低,可以满足多种农药残留同时分析的要求。     

Multiwalled carbon nanotubes mass-produced by dc arc discharge in He–H2 gas mixture

Uniform cathode deposits (longer than 15 mm), containing multiwalled carbon nanotubes (MWNTs) inside, were produced by dc arc discharge evaporation with a computer-controlled feeder of a pure-carbon electrode without a metal catalyst in a He–H₂ gas mixture. The purification of MWNTs was carried out to remove amorphous carbon and carbon nanoparticles. High-resolution transmission electron microscopy observations and Raman scattering studies show that the MWNTs possess a high crystallinity and a mean outermost diameter of ∼ ∼10 nm. It has been confirmed that the current density in the electron field emission from a purified MWNT mat can reach 77.92 mA/cm², indicating that the purified MWNTs are a promising candidate electron source in a super high-luminance light-source tube or a miniature X-ray source.     

A density functional theoretic study of novel silicon-carbon fullerene-like nanostructures: Si40C20, Si60C20, Si36C24, and Si60C24

Fullerene-like silicon nanostructures with twenty and twenty-four carbon atoms on the surface of the Si₆₀ cage by substitution, as well as inside the cage at various orientations have been studied within the generalized gradient approximation to density functional theory. Full geometry optimizations have been performed without any symmetry constraints using the Gaussian 03 suite of programs and the LANL2DZ basis set. Thus, for the silicon atom, the Hay-Wadt pseudopotential with the associated basis set is used for the core electrons and the valence electrons, respectively. For the carbon atom, the Dunning/Huzinaga double zeta basis set is employed. Electronic and geometric properties of these nanostructures are presented and discussed in detail. Optimized silicon-carbon fullerene like nanostructures are found to have increased stability compared to the bare Si₆₀ cage and the stability depends on the number and the orientation of carbon atoms, as well as on the nature of silicon-carbon and carbon-carbon bonding.     

Random telegraph noise in carbon nanotubes and peapods

The switching of resistance between two discrete values, known as random telegraph noise (RTN), was observed in individual single-walled carbon nanotubes (SWNTs) and C₆₀-filled SWNTs (the so-called peapods). The RTN has been studied as a function of bias-voltage and gate-voltage as well as temperature. By analyzing the features of the RTN, we identify three different types of RTN existing in the SWNT related systems. While the RTN can be generated by the various charge traps in the vicinity of the SWNTs, the RTN for metallic SWNTs is mainly due to reversible defect motions between two metastable states, activated by inelastic scattering with ballistic electrons. On the other hand, the noise for peapods can be attributed to the motion of C₆₀ molecules in hollow space of SWNTs.