Orientational and electro-optical properties of liquid crystal aligned with a directly spinnable carbon nanotube web

We investigated the orientational and electro-optical properties of a nematic liquid crystal (LC) aligned with a directly spinnable carbon nanotube (CNT) web functioning both as an electrode and as an alignment layer. The LC molecules were uniformly oriented along the drawing direction of the CNT web and the spatially averaged birefringence was comparable to a rubbed polyimide sample. The CNT web sample also showed smaller residual DC and hysteresis compared to the polyimide sample.     

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

A polyacrylonitrile‐based carbon fiber was electrochemically oxidized in an aqueous ammonium bicarbonate solution with current density of up to 2.76 A/m² at room temperature. X‐ray photoelectron spectroscopy revealed that the oxygen content increased with increasing current density before approaching saturation. The increase can be divided into two regions, the rapid increase region (0–1.78 A/m²) and a plateau region (1.78–2.76 A/m²). The surface chemistry analysis showed that the interlaminar shear strength (ILSS) value of the carbon fiber/epoxy composite could be improved by 24.7%. The carbon structure was examined using Raman spectroscopy in terms of order/disorder in the graphite structure and the results indicated that the relative percentage of graphite carbon in the form of sp² hybridization increased above a current density of 1.39 A/m². The increasing non‐polar graphite carbon on the carbon fiber surface decreased the surface energy. As a result, both the surface free energy () and its polar component () decreased when current density increased above 1.78 A/m². The ILSS value had no direct relationship with the nature and surface density of the oxygen‐containing functional groups nor with the carbon structure. It is the surface free energy (), especially the polar component (), which played a critical role in affecting the interfacial adhesion of carbon fiber/epoxy composites. The ILSS value changed with increasing current density and could be divided into three distinct regions, as chemical interaction region (I), anchor force region (II) and matrix damage region (III). Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and thermal properties of a new styryl-functionalized pentafulvene glassy carbon precursor

The first preparation of a styryl-functionalized aryl pentafulvene 4 was carried out. In the crystal structure of 4, the packing of fulvene molecules results in the shortest intermolecular contacts between aligned vinyl groups. Thermal reactivity studies of 4 (DSC and TGA, under N₂) revealed a small difference between the melting point (120 °C) and the T_onset for cross-linking (125 °C), and provided strong evidence for the production of a network material (net4) due to reactivity of the attached styryl group. Pyrolysis of net4 under N₂ gave a glassy carbon product in low yield as revealed by powder X-ray and TGA analyses (carbon yield (TGA) of 38% (900 °C)).     

Multi-wall carbon nanotube-supported manganese(III) porphyrin: An efficient and reusable catalyst for the oxidation of alkenes with H2O2 under ultrasonic irradiation

A manganese complex of meso-tetrakis(p-hydroxyphenyl)porphyrin immobilized onto functionalized multi-wall carbon nanotubes has been synthesized and characterized. The catalytic activity of this heterogeneous catalyst was investigated in the oxidation of various olefins with hydrogen peroxide under ultrasonic irradiation. The role of the stoichiometric amounts of acetic anhydride/or acetic acid as an activator that introduces in situ peracetic acid is discussed. This heterogeneous catalyst was highly reusable in the oxidation reactions and reused several times without significant loss of its catalytic activity.     

Investigation of Coenzyme Q10 by Voltammetry

A simple, accurate and rapid voltammetric method has been developed for the quantitative determination of coenzyme Q₁₀. Studies with direct current voltammetry were carried out using a glassy carbon electrode (GCE) in a phosphate buffer solution (pH 6.86). A well-defined oxidation peak of CoQ₁₀ was obtained at -0.600 V vs Ag/AgCl. The magnitude of the oxidation peak current has been found to be related to the concentration of the coenzyme over the range of (2.010^-5 to 2.010^-4 M) (r = 0,991). Antioxidant activity of CoQ₁₀ was investigated.     

Utilization of Pine Nut Shell derived carbon as an efficient alternate for the sequestration of phthalates from aqueous system

This study highlights the importance of a cheap bio waste; Pine Nut Shell (PNS), from which a carbon is synthesized that can efficiently remove toxic phthalates from an aqueous system. PNS derived carbon shows high affinity toward phthalates in descending order along with adsorption capacity i.e., dibutyl phthalate (DBP) 5.65 mg/g > diallyl phthalate (DAP) 3.64 mg/g > diethyl phthalate (DEP) and 2.87 mg/g > dimethyl phthalate (DMP) 2.48 mg/g. Different characterization techniques such as FTIR, elemental analysis, point of zero electric charge (PZC), SEM, EDX and BET were employed to investigate the binding sites and surface area of the adsorbent. Adsorption experiments were performed both in batch and column modes. Equilibrium studies showed that the Langmuir isotherm fits best to experimental data. Kinetically, adsorption phenomena obeyed pseudo second order. Furthermore, thermodynamic results expressed the exothermic nature of adsorption on the basis of negative value of enthalpy change. Column sorption method was also adapted to check the feasibility of the adsorption process through the investigation of flow rate, breakthrough curve and pre-concentration factor which is found to be 13 for DMP and DEP and 16 for DAP and DBP. Methanol was found to be best solvent for the recovery of phthalates. Application in real water samples also showed good efficiency of PNS derived carbon for the removal of phthalates.     

Measurement and modeling of metoclopramide hydrochloride (anti-emetic drug) solubility in supercritical carbon dioxide

Knowledge of drug solubility data in supercritical carbon dioxide (SC-CO₂) is a fundamental step in producing nano and microparticles through supercritical fluid technology. In this work, for the first time, the solubility of metoclopramide hydrochloride (MCP) in SC-CO₂ was measured in pressure and temperature range of 12 to 27 MPa and 308 to 338 K, respectively. The results represented a range mole fractions of 0.15 × 10^-5 to 5.56 × 10^-5. To expand the application of the obtained data, six semi-empirical models and three models based on the Peng-Robinson equation of state (PR + VDW, PR + WS + Wilson and PR + MHV1 + COSMOSAC) with different mixing rules and various ways to describe intermolecular interactions were investigated. Furthermore, total enthalpy, sublimation enthalpy and solvation enthalpy relevant to MCP solvating in SC-CO₂ were estimated.     

Submicron carbon-based hybrid nano-pour-point depressant with outstanding pour point depressant and excellent viscosity depressant

We have investigated the effective utilization potential of carbon nanomaterials in the field of pour point depressants, and reported three kind of carbon-based hybrid nano-pour-point depressants with different dimensions. In this paper, poly-α-olefins-acrylate high-carbon ester pour point depressant (PAA-18) was prepared by esterification and polymerization as the basic pour point depressant. Then, the basic pour point depressant PAA18 was modified by solvothermal method with graphene oxide (GO), carbon nanospheres (Cna) and carbon nanotubes (OCNTs). The morphology and structure of the composites were analyzed by SEM, FTIR and XRD. The results showed that PAA18 was successfully in situ polymerized on GO, Cna and OCNTs. We took the simulated oil as the experimental object, and evaluated its pour point, rheological properties and wax crystal morphology, and achieved excellent results. In the three carbon-based hybrid nano-pour-point depressants with different carbon contents, the oxidation carbon nanotubes composite pour point depressant (PAA18-1 % OCNTs) with carbon content of 1 % had the best pour point and viscosity reduction effect when the dosage was 1250 ppm, which could make the pour point of the simulated oil containing wax decrease by 16 °C. PAA18-1 % OCNTs reduced the pour point by 5 °C more than PAA18. This paper provides reference for the application of carbon nanomaterials in the field of pour point depressant.     

Adatom Defect Induced Spin Polarization of Asymmetric Structures

The spin polarization of carbon nanomaterials is crucial to design spintronic devices. In this paper, the first-principles is used to study the electronic properties of two defect asymmetric structures, Cap-(9, 0)-Def [6, 6] and Cap-(9, 0)-Def [5, 6]. We found that the ground state of Cap-(9, 0)-Def [6, 6] is sextet and the ground state of Cap-(9, 0)-Def [5, 6] is quartet, and the former has a lower energy. In addition, compared with Cap-(9, 0) CNTs, the C adatom on C₃₀ causes spin polarization phenomenon and Cap-(9, 0)-Def [6, 6] has more spin electrons than Cap-(9, 0)-Def [5, 6] structure. Moreover, different adsorb defects reveal different electron accumulation. This finding shows that spin polarization of the asymmetric structure can be adjusted by introducing adatom defects.     

FeO(OH)@C-Catalyzed Selective Hydrazine Substitution of p-Nitro-Aryl Fluorides and their Application for the Synthesis of Phthalazinones

An efficient hydrazine substitution of p-nitro-aryl fluorides with hydrazine hydrates catalyzed by FeO(OH)@C nanoparticles is described. This hydrazine substitutions of p-nitro-aryl fluorides bearing electron-withdrawing groups proceeded efficiently with high yield and selectivity. Similarly, hydrogenations of p-nitro-aryl fluorides containing electron-donating groups also smoothly proceeded under mild conditions. Furthermore, with these prepared aryl hydrazines, some phthalazinones, interesting as potential structures for pharmaceuticals, have successfully been synthesized in high yields.