Polyethylene Glycol–Enhanced Chemoselective Synthesis of Organic Carbamates from Amines,CO2, and Alkyl Halides

An efficient and environmentally benign method for the synthesis of organic carbamates was developed. Amines, CO₂, and alkyl halides underwent a three-component reaction with the aid of K₂CO₃ and polyethylene glycol (PEG, MW = 400), affording the organic carbamates under ambient conditions. PEG could presumably act as a solvent and phase-transfer catalyst (PTC). Notably, the presence of PEG could also depress the alkylation of both the amine and the carbamate, thus resulting in enhanced selectivity toward the target carbamate.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.      

Microstructural evolution during oxidative ablation in air for polyacrylonitrile based carbon fibers with different graphite degrees

Polyacrylonitrile‐based carbon fibers with different graphite degrees were oxidative ablated at 500 and 600 °C in air. By Thermal gravimetric (TG), Raman spectroscopy, X‐ray diffraction, and SEM, the mass loss, microstructure, and surface morphology of carbon fibers were investigated. The mass loss of carbon fiber increases linearly with increasing oxidative ablated time under 500 and 600 °C. The carbon fiber with higher graphite degree shows higher oxidative resistance, and the surface roughness increases gradually because of chemical ablation during the whole oxidation. A gloss morphology appears on the surface primarily because of physical denudation for carbon fibers with lower graphite degree and then burn off according to carbon and oxygen reaction. The crystallite size (La) decreases significantly, while interlayer spacing(d₀₀₂) remains nearly unchanged. SEM observation suggests the two kinds of ablation mechanisms for carbon fibers with different graphite degrees indicating that CC band in sp³ hybridization prefers to be attacked by oxygen molecule more than that in sp² hybridization during oxidation ablation in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Various ways to strengthen the fiber‐matrix interface for enhanced composite performance

Surface treatment (ST) of carbon fibers (CF) leads to an enhancement in fiber‐matrix adhesion. However, it deteriorates the strength of a fiber which makes its reinforcing action less effective in a composite. These effects in opposite directions control the net strength of a composite, and hence, the treatment has to be judiciously applied, which would enhance the first factor and minimize the second one. Authors have recently reported on four effective techniques (using various doses) such as treatments with nanoparticles of Ytterbium fluoride (YbF₃)_, cold remote nitrogen–oxygen plasma (CRNOP), γ‐ray irradiation and nitric acid oxidation. Amongst these methods, nitric acid oxidation is studied in depth in the literature, and γ‐ray irradiation is sparingly studied. However, nano‐YbF₃ and CRNOP were first time reported in the literature by the authors. However, comparative aspects of all these methods were not addressed. In this paper, these aspects in details are discussed to lay down the right criteria for selection of a ST technique of CF to design the desired performance of a composite. The composites with polyetherimide and treated CF (including untreated) were developed and evaluated for various properties including tribological one. Treated CF based composites exhibited excellent mechanical and tribological properties (under harsh operative conditions with wear rates ≈ 1 × 10^?15 m³/Nm and μ ≈ 0.09). It was concluded that for strength and tribo‐performance, different treatments and doses are to be employed. Overall nanosized‐YbF₃ treatment of CF proved to be the most promising ST method. Copyright © 2013 John Wiley & Sons, Ltd.     

Scaling in Electrical Conductivity Measurements and Rheological Measurements of Monarch 700 Dispersions Stabilized by Polymers

For making stable dispersions of graphitic carbon black (Monarch 700), the effectiveness of three dispersants/polymers (hypermer LP1, hypermer B246, and OLOA 11000) in xylene is investigated. Hypermer LP1 (polyhydroxystearic acid) is a homopolymer and hypermer B246 (PEG 30-dipolyhydroxystearate) is a polyhydroxystearic acid/polyethylene oxide/polyhydroxystearic acid ABA block copolymer, while OLOA 11000 (polyisobutylene succinimide) has a polar head group (polyamine) attached to a hydrocarbon chain (polyisobutylene). Well-dispersed graphitic carbon black dispersions were prepared using dispersants at optimum concentrations. Percolation threshold and rheological threshold were determined by analyzing the variations in electrical conductivity and elastic modulus with concentration of carbon black. Above threshold concentration, scaling law was applied to experimental data of rheology (dynamic measurements) and electrical conductivity measurements to evaluate quality of the system. Effectiveness of polymers was investigated on the basis of value of critical exponent (t and t′, respectively) in scaling power law. Hypermer LP1 was proved to be a poor dispersant for Monarch 700 dispersions while other two polymers were found to be effective stabilizers.     

Removal of Cyanide from Aqueous Solutions by Adsorption on Activated Carbon Prepared from Lignocellulosic By-products

Cyanide is considered one of the most dangerous compounds for the environment. They are discharged by various industries: chemical and metallurgical processes (extraction of gold and silver) and food industries. Adsorption is among the most used processes for elimination of cyanides particularly for the low concentrations. In this work, the cyanide removal is carried out by adsorption onto activated carbons prepared from olive stones and coffee ground. So we can promote this by-product as an inexpensive adsorbent. The prepared activated carbons are characterized by scanning electron micrograph and by determination of the physicochemical properties and specific surface area. All the adsorption experiments were performed in batch mode on synthetic water cyanide (KCN) at pH 10.8–11.0 to avoid volatilization of very toxic HCN. To describe the adsorption kinetics, the kinetic models of pseudo-first-order, pseudo-second-order, and intra-particle diffusion were applied. The experimental equilibrium data for adsorption of free cyanide were analyzed by the Langmuir, Freundlich, and Temkin isotherm models.     

Fractal Aperture Distribution of Activated Carbon Fiber and Adsorption Behavior to Low‐Density Benzene Steam

Based on the J(x) fractal distribution function of aperture given by Jaroniec, this article suggests another function K(x), a variant of J(x) but offering new insight. We then use these two functions to characterize three kinds of activated carbon fiber (ACF) of different specific areas. This article also provides the fractal distribution of the aperture and the isotherm of nonpolarity benzene steam on the ACF specimens and the relationship between them.     

Synthesis and Characterization of Multi‐Walled Carbon Nanotube/Polythiophene Composites

Multi‐walled carbon nanotube (MWCNT)/polythiophene (PTh) composites have been prepared by in situ chemical oxidative polymerization. PTh is synthesized onto the sidewalls of the MWCNTs, which play a role as hard templates for PTh to produce one‐dimensional nanostructures. The morphology and structures of the MWCNT/PTh composites are characterized by High‐resolution transmission electron microscopy, x‐ray diffraction, and Fourier transform infrared spectrometry. Their electrical property and thermal stability are determined using vector network analyzer and thermal gravimetric analyzer. Moreover, the mechanism of MWCNT/PTh nanowire formation is described. The studies show that the composites are nanowires with core‐shell structure, in which the outer shells and inner cores are formed by PTh and MWCNTs, respectively. The addition of MWCNTs does not change the backbone structure of PTh and affect the amorphous condition of PTh very slightly, however, it improves the electrical conductivity and thermal stability of PTh.     

Photocatalytic Activity of Nanocomposites of ZnO and Multi-Walled Carbon Nanotubes for Dye Degradation

Nanocomposites of ZnO and multi-walled carbon nanotubes (MWNTs) were prepared via electrostatic interaction and in situ hydrothermal synthesis approaches. The ZnO/MWNTs nanocomposites display relatively higher photocatalytic activity than ZnO nanoparticles for the degradation of Rhodamine B. Therein, MWNTs, acting as a photogenerated electron acceptor, retard the recombination of photoinduced electron and hole. The experimental results show that the photocatalytic activity of the ZnO/MWNTs nanocomposites strongly depends on the synthetic route, which is probably due to the difference of surface states resulted from the different preparation processes.     

电化学石英晶体微天平研究高氯酸钠水溶液中活性炭电极的离子存储行为

以电化学石英晶体微天平(EQCM)为主要测试手段,在不同浓度的高氯酸钠(NaClO4)水溶液中研究了水合离子吸附到活性炭电极孔隙过程中电极的质量变化.对于每种电解液,根据Raman光谱和EQCM数据分别计算了本体溶液中和电极/溶液界面上Na+的水合数.通过比对这两组Na+水合数,探讨了Na+存储到活性炭负极过程中的去溶剂化效应.     

催化臭氧氧化降解邻苯二甲酸二甲酯中催化剂构效关系

采用传统焙烧和微波辐射制备了不同活性炭 (AC) 负载 Ru 催化剂, 并用于催化臭氧氧化降解邻苯二甲酸二甲酯 (DMP) 反应中, 探讨了催化剂的构效关系. 结果表明, 所有 AC 和催化剂均能提高臭氧氧化 DMP 过程中 TOC (总有机碳) 去除率, 其活性顺序为 Ru/coal-AC > nutshell-AC > Ru/nutshell-AC > Ru/coconut-AC ≈ coal-AC > coconut-AC. 负载的 Ru 颗粒扩散到 AC 大孔中, 增加了反应的传质阻力, 使得反应物与 AC 内表面的活性位和金属 Ru 的接触机会减少, 这是 Ru/nutshell-AC 和 Ru/coconut-AC 活性低于 Ru/coal-AC 的一个原因; 催化剂表面 Ru 分散度也是导致其活性差别的原因之一. 微波加热引起 nutshell-AC 表面活性官能团发生变化, 从而导致其负载的 Ru 催化活性降低. 相对于传统焙烧, 微波辐射热处理能够提高 coal-AC 表面 Ru 的分散度, 从而提高催化剂活性.