Defect‐Controlled Preparation of UiO‐66 Metal–Organic Framework Thin Films with Molecular Sieving Capability

Metal–organic framework (MOF) UiO‐66 thin films are solvothermally grown on conducting substrates. The as‐synthesized MOF thin films are subsequently dried by a supercritical process or treated with polydimethylsiloxane (PDMS). The obtained UiO‐66 thin films show excellent molecular sieving capability as confirmed by the electrochemical studies for redox‐active species with different sizes.     

Effect of alcohol sources on synthesis of single-walled carbon nanotubes

The effect of oxidant species forming an alcohol molecule for hot-filament chemical vapor deposition (HFCVD) on single-walled carbon nanotubes (SWCNTs) growth has been investigated. To use a graphite rod as a filament for HFCVD to decompose alcohol sources, contamination-free sample surface can be obtained and SWCNTs are successively and densely grown at a lower temperature than those by conventional thermal CVD. It is found that the higher the molecule number of alcohol among CH₃OH, C₂H₅OH, and 2-C₃H₇OH is, the lower the initial growth rate of SWCNTs is. As for CH₃OH, diameter distribution of SWCNTs is dynamically changed with the growth time passed, and a negative growth rate is observed at the later stage of growth. The growth kinetics depending on the alcohol sources is discussed on the basis of a capability of the oxidant species to burn away SWCNTs and deactivation of Co catalysts used for the growth.     

纳米碳管/铝基复合材料的制备及摩擦磨损性能研究

利用粉末冶金法制备纳米碳管/铝基复合材料,研究不同纳米碳管含量对复合材料硬度和稳态摩擦磨损行为的影响,采用扫描电子显微镜观察复合材料的磨损表面形貌,并对其磨损机制进行探讨.结果表明:随着纳米碳管质量分数的增加,复合材料的硬度呈现先增大而后减小的趋势,含质量分数为2%的纳米碳管复合材料硬度比铝增加约80%;复合材料的摩擦系数逐渐降低,磨损率先减小而后增大;含质量分数为1%的纳米碳管复合材料磨损机制为磨粒磨损和粘着磨损,而含质量分数为2%的纳米碳管复合材料以剥层磨损和疲劳磨损为主.     

High Performance Nonvolatile Transistor Memories Utilizing Functional Polyimide‐Based Supramolecular Electrets

We report pentacene‐based organic field‐effect transistor memory devices utilizing supramolecular electrets, consisting of a polyimide, PI(6FOH‐ODPA), containing hydroxyl groups for hydrogen bonding with amine functionalized aromatic rings (AM) of 1‐aniline (AM1), 2‐naphthylamine (AM2), 2‐aminoanthracene (AM3), and 1‐aminopyrene (AM4). The effect of the phenyl ring size and composition of AM1–AM4 on the hole‐trapping capability of the fabricated devices was investigated systematically. Under an operating voltage under ±40 V, the prepared devices using the electrets of 100 % AM1–AM4/PI ratios exhibited a memory window of 0, 8.59, 25.97, and 29.95 V, respectively, suggesting that the hole‐trapping capability increased with enhancing phenyl ring size. The memory window was enhanced as the amount of AM in PI increased. Furthermore, the devices showed a long charge‐retention time of 10⁴ s with an ON/OFF current ratio of around 10³–10⁴ and multiple switching stability over 100 cycles. This study demonstrated that the electrical characteristics of the OFET memory devices could be manipulated through the chemical compositions of the supramolecular electrets.     

An unconventional method for measuring the Tc L3‐edge of technetium compounds

Tc L₃‐edge XANES spectra have been collected on powder samples of SrTcO₃ (octahedral Tc⁴⁺) and NH₄TcO₄ (tetrahedral Tc⁷⁺) immobilized in an epoxy resin. Features in the Tc L₃‐edge XANES spectra are compared with the pre‐edge feature of the Tc K‐edge as well as other 4d transition metal L₃‐edges. Evidence of crystal field splitting is obvious in the Tc L₃‐edge, which is sensitive to the coordination number and oxidation state of the Tc cation. The Tc L₃ absorption edge energy difference between SrTcO₃ (Tc⁴⁺) and NH₄TcO₄ (Tc⁷⁺) shows that the energy shift at the Tc L₃‐edge is an effective tool for studying changes in the oxidation states of technetium compounds. The Tc L₃‐edge spectra are compared with those obtained from Mo and Ru oxide standards with various oxidation states and coordination environments. Most importantly, fitting the Tc L₃‐edge to component peaks can provide direct evidence of crystal field splitting that cannot be obtained from the Tc K‐edge.     

CARBON NANOTUBES VIA METHANE DECOMPOSITION ON AN ALUMINA SUPPORTED COBALT AEROGEL CATALYST

An alumina-supported cobalt aerogel catalyst prepared from a sol-gel and a supercritical drying method was used in the catalytic decomposition of methane.The physical-chemical properties of the catalyst were characterized and its activity for methane decomposition was investigated.The effects of calcination and reaction temperatures on the activity of the catalyst and the morphology of the carbon nanotubes produced were discussed.A COAl2O4 spinel structure formed in the calcined catalyst.The quantity of the nanotubes produced in the reaction increases with the amount of cobalt in the reduced catalyst.A higher reaction temperature leads to a higher reaction rate,though faster deactivation of the catalyst occurs with the change.The carbon nanotubes grown on the catalyst have smooth walls and uniform diameter distribution.     

碳量子点/曙红Y比率型荧光探针测定L-抗坏血酸

以天然生物质去皮的蓖麻为碳源,采用一步水热法合成了荧光性能优良的绿色荧光蓖麻碳量子点(CO-CQDs),对其形貌和发光性能进行了表征。通过将该CO-CQDs与荧光极强的卤代荧光素染料曙红Y(EY)复合,二者可形成荧光发射峰相距较远的新型CO-CQDs/EY复合物。在pH=4.00的Na₂HPO₄-柠檬酸缓冲溶液中,在320 nm的激发波长下,CO-CQDs/EY复合物于405 nm和540 nm处显示出两个独立的荧光发射峰。在该体系中加入Cr(Ⅵ),405 nm和540 nm两处的荧光信号均显著猝灭。L-抗坏血酸(L-ascorbic acid,AA)的加入可使复合物于540 nm的荧光信号恢复,而405 nm处的荧光强度基本不变。据此建立了一种以CO-CQDs/EY复合物为比率型荧光探针测定AA的新方法。实验测定了荧光信号恢复的最佳条件和影响荧光恢复的因素,初步探讨了反应机理。在优化的实验条件下,该探针于540 nm/405 nm两处的荧光强度比值与AA的浓度在5.0×10^-8～4.0×10^-6 ...     

Asymptotic analysis of interactions between highly conducting cylinders

We consider the conduction of heat or electricity between a pair of equal, touching cylinders embedded in a matrix. We solve exactly a problem in which each cylinder contains a heat source, and analyse the solution asymptotically for the case in which the conductivity of the fibres is much greater than that of the matrix. Using this analysis, we assess the accuracy of approximate schemes for calculating the interactions between the fibres of a composite material. We conclude that the approximate solutions are better at predicting global quantities, such as total flux, than they are at predicting pointwise quantities such as the temperature field.     

一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题

依据一维六方准晶压电材料反平面问题的基本方程,利用复变函数方法,通过引入适当的保角映射,研究了一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题,并利用Cauchy积分理论,得到电不可通和电可通边界条件下的应力场和位移场的复表示以及裂纹尖端场强度因子的解析表达式.