高性能纳米碳材料改性Cu/ZnO/Al2O3甲醇水蒸汽重整制氢催化剂

由铜基催化剂催化甲醇水蒸汽重整制氢是有效解决车载燃料电池等制氢需求的潜在途径．但传统铜基催化剂对该反应的低温催化活性及制氢选择性均不理想．近年来碳纳米管及活性碳纤维等因具有独特的纳米孔结构、高比表面积和优异的吸附性能作为潜在的新型催化材料而备受关注．     

Electrochemical Characterization of a Pyrolytic Carbon Film Electrode and the Effect of Anodization

A pyrolytic carbon (PC) film electrode was fabricated by the chemical vapor deposition (CVD) method. This report deals with the preparation, characterization and electrochemical behavior of this carbon film. Cyclic voltammetry, linear sweep voltammetry, Raman spectroscopy and scanning electron microscopy were employed to characterize the electrode. Low background current and capacitance were observed and the rate of charge transfer for Fe(CN) redox couple was determined via cyclic voltammetry. Also the effect of the anodic activation on the electrochemical activity was evaluated and characterized with respect to the sequence of voltage applied to the electrode. The excellent electrochemical activity and low background current are the reasons why this electrode is attractive for electroanalysis measurements with lower detection limit.     

纳米金催化剂的抗水性能和抗硫中毒性能

与Au/Al2O3相比,复合载体负载的Au/FeOx/Al2O3具有更高的催化CO氧化的低温活性和稳定性,且表现出湿度增强效果,水分压为550~1 600 Pa时催化剂活性较高.在完全无水的环境中,催化剂发生快速不可逆失活;在饱和水汽的环境中,催化剂发生缓慢可逆失活.在水汽作用下的失活与纳米金粒子的粒径长大有关.助剂对催化剂抗水性能影响不大,但对抗硫中毒性能的影响较大.Au/CeO2/Al2O3催化剂显示有最佳的抗硫中毒性能.催化剂表面硫化物和硫酸盐的生成是导致催化剂不可逆硫中毒失活的主要原因.     

L-色氨酸功能化多壁碳纳米管的制备与表征

采用L-色氨酸作为修饰剂,制备了一种新型功能化的多壁碳纳米管,并对其进行了表征。红外光谱和电化学实验均证实碳纳米管和色氨酸是通过酰胺键共价键合的。其中,循环伏安实验中0V附近羧基峰的消失与红外光谱中N-酰化氨基酸的—C=O峰的形成相对应,证明了共价键的形成。     

维生素C在多壁碳纳米管/壳聚糖复合膜修饰玻碳电极上的电化学行为及测定

研究了维生素C在多壁碳纳米管/壳聚糖复合膜修饰玻碳电极上的电化学行为及测定。实验结果表明,在0.2 mol/L PBS(pH6.0)缓冲溶液中,修饰电极对抗坏血酸的氧化具有明显的催化和增敏效应,其氧化峰电位由 0.5 V负移至 0.1 V(vs.AgCl/Ag)。对修饰剂碳纳米管的用量、支持电解质、富集电位和富集时间等进行了优化。采用半微分伏安法进行定量测定,其线性范围为4.0×10-6~2.0×10-3mol/L,r=-0.998 3,检出限为1.0μmol/L。对抗坏血酸在修饰电极上的电化学行为进行了探讨,其电极反应为具有吸附特性和不可逆的电极过程,测得参加反应的质子数为2,电极反应的电子转移系数为0.59。测定了维生素C药片中抗坏血酸的含量,回收率在93%~105%。     

多壁碳纳米管-Nafion复合膜修饰玻碳电极测定硝苯地平的研究

研制了以Nafion分散羧基化多壁碳纳米管的化学修饰电极(Nafion-MWCNTs/GC),研究了硝苯地平(NIF)在修饰电极上的电化学行为和测定方法。实验结果表明,在0.1mol/LNH3-NH4Cl(pH9.6)溶液中,Nafion-MWCNTs/GC,对NIF具有明显的催化和增敏作用,还原峰电位由-0.85V(裸电极)正移到-0.75V(vs.AgCl/Ag)(修饰电极),灵敏度增加约7倍。对各种实验条件进行了优化。定量测定的线性范围为2.5×10-7~4.5×10-5mol/L,r为0.9974;检出限为8.0×10-8mol/L。探讨了NIF在Nafion-MWCNTs/GC上的电极过程和反应机理,测得在本体系中参与反应的质子数和电子转移数均为4,电子转移系数α为0.41。对NIF药片进行了测定,回收率为94.5%~101.0%。     

玻碳电极吸附伏安法测定痕量硫化物的研究

研究了利用玻碳电极吸附伏安法测定痕量硫化物的新方法。在含高铁离子的酸性溶液中,硫化物与对-氨基苯二甲基盐酸盐(p-ADAD)反应生成亚甲基蓝,采用线性扫描伏安法亚甲基蓝于-0.30 V(vs.SCE)在玻碳电极上出现灵敏的还原峰,峰电流与S2-浓度在0～25μg/mL范围内呈良好的线性关系。优化了实验条件,研究了电极反应机理。该方法具有灵敏、简便、快速、避免汞污染等特点。已成功用于多种水样中痕量硫化物的测定,回收率为98.0%～104.6%,结果令人满意。     

电化学氧化赖氨酸应用于改变碳表面荷电状态

电化学氧化赖氨酸应用于改变碳表面荷电状态;表面改性;玻碳;赖氨酸单层膜;循环伏安;静电排斥作用     

Preparation of a Carbon-Coated SPME Fiber and Application to the Analysis of BTEX and Halocarbons in Water

A carbon-coated fiber for solid-phase microextraction (SPME) has been prepared from powdered activated carbon (PAC) and a fused-silica fiber. Scanning electron microscopy of the coating revealed the carbon particles were uniformly distributed on the surface of the fiber substrate. Efficient extraction of BTEX (benzene, toluene, ethylbenzene, p-xylene, and o-xylene) and halocarbons (chloroform, trichloroethylene, and carbon tetrachloride), with short extraction and desorption times, was achieved by use of the coated fiber. The maximum working temperature of the coated fiber was 300 °C and the lifetime was over 140 desorption operations at 260 °C. Limits of quantification (LOQ) of the SPME method for the eight analytes ranged from 0.01 to 0.94 μg L⁻¹, and relative standard deviations (RSD) were below 7.2% (n=6). Recoveries were 87.9–113.4% when the method was applied to the analysis of BTEX and the halocarbons in real aqueous samples. An erratum to this article is available at .     

Liquid-Phase Hydrogenation of Chloronitrobenzene Over Pt-Sn-B Amorphous Catalyst Supported by Carbon Nanotubes

The Pt-Sn-B/carbon nanotubes (CNTs) catalyst was prepared by impregnation-chemical reduction method. Its catalytic performance was evaluated by liquid-phase hydrogenation of chloronitrobenzene (CNB). The results showed that the catalyst had higher catalytic performance than common hydrogenation catalysts. The conversion of CNB could reach 99.9%, and the dechlorination of chloroaniline (CAN) was less than 1.9% when catalyzed by Pt-Sn-B/CNTs and more than 8.0% when catalyzed by common hydrogenation catalysts. X-ray diffraction and selected area electron diffraction analysis showed that Pt-Sn-B/CNTs had an amorphous alloy structure that can improve catalytic performance. Transmission electron micrograph image showed that the catalyst particles were highly distributed on the surface of CNTs. The hydrodechlorination of CNB was mainly affected by the unique structure of CNTs and the nature of the amorphous metals on the surface of CNTs. The relationship between the interaction of CNTs and amorphous metals and the catalytic performance of the catalyst is also discussed. Translated from the Chinese Journal of Catalysis, 2005, 26(3) (in Chinese)