超高比表面炭载钼煤气甲烷化催化剂

以沥青中间相为原料，氢氧化钾直接活化，获得了比表面达２３６３ｍ￣２／ｇ的超高比表面炭分子筛（ＣＭＳ）。分别以ＣＭＳ、ＳｉＯ＿２、活性炭和θ－Ａｌ＿２Ｏ＿３为担体，制备了负载钼催化剂，并研究其加压甲烷化反应性能，发现活性依下面顺序增加：θ－Ａｌ＿２Ｏ＿３＜ＳｉＯ＿２＜活性炭（ＡＣ）＜ＣＭＳ。还分别以钼酸铵和磷钼酸（ＨＰＭｏ）为前驱体，制备了ＣＭＳ负载钼催化剂，并考察了其煤气甲烷化活性，发现不同的催化剂前驱体对催化剂反应活性影响很大。根据产物中ＣＨ＿４／ＣＯ＿２的变化，推测ＣＯ在钼催化剂上的甲烷化反应包括如下两个步骤：（１）３Ｈ＿２＋ＣＯ→ＣＨ＿４＋Ｈ＿２Ｏ，（２）ＣＯ＋Ｈ＿２Ｏ→ＣＯ＿２＋Ｈ＿２。     

抗坏血酸在多壁碳纳米管修饰玻碳电极上的催化氧化

多壁碳纳米管;抗坏血酸;修饰电极;电催化;伏安法     

溶剂热还原法制备蛋壳状碳材料

Eggshell-like carbon materials with high yields have been synthesized by a solvothermal route in a stainless steel autoclave using metallic zinc and absolute ethanol as starting materials. The products were characterized by X-ray powder diffractometry (XRD)， energy-dispersive X-ray spectroscopy (EDX)， Raman spectroscopy and scanning electron microscopy (SEM). The eggshell-like carbon spheres had diameters ranging from 500 nm to 1 μm. The optimal reaction conditions to obtain eggshell-like carbon materials were 600 ℃ and 12 h.     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

Application of Short-wave Near-infrared Reflectance Spectroscopy in Controlling Extract of Fructus Cnidii Using Supercritical Carbon Dioxide

Fructus cnidii （Chinese name shechuangzi） is the fruit produced by Cnidium monnieri （L.） Cusson （Umbelliferae）. It is a perennial herb that is used to treat skin-related diseases and gynecopathyell. Recent pharmacological studies have revealed crude extracts or components isolated from fructus cnidii possess antiallergic, antipruritic, antidermatophytic, antibacterial, antifungal, and antiosteoporotic activities. Osthole and imperatorin are the major compounds present in shechuangzi. They are often used as standards for the evaluation of the quality of shechuangzi products.     

介孔CeO2负载的Co3O4催化剂催化富氢气体中的CO优先氧化反应

采用溶胶-凝胶法制备出介孔氧化铈(meso-CeO2)及其负载的氧化钴(Co3O4/meso-CeO2)催化剂,并将其应用于富氢气体中CO的优先氧化反应.通过N2物理吸附及X射线衍射表征考察了meso-CeO2和Co3O4/meso-CeO2的结构性质.活性评价结果表明,在高空速下,Co3O4/meso-CeO2催化剂上的CO优先氧化性能很好,但水和CO2对CO的氧化有一定的负作用.Co3O4/meso-CeO2催化剂的CO完全氧化温度窗口远大于沉淀法制备CeO2负载的氧化钴催化剂.     

功能碳黑修饰的丝网印刷碳糊电极葡萄糖生物传感器的特性与机理

从碳黑表面引发苯乙烯磺酸钠的原子转移自由基聚合制备了聚(苯乙烯磺酸钠)改性碳黑(CB-g-PSS),并分别以掺杂和沉积两种不同方式修饰电极的生物敏感膜,再在生物敏感膜上吸附固定葡萄糖氧化酶,制作了两种葡萄糖氧化酶传感器,得到了不同的效果.实验结果表明,将CB-g-PSS与成膜材料掺杂制作的生物传感器与无修饰传感器相比,响应灵敏度下降了1/3;将CB-g-PSS沉积修饰丝网印刷碳糊电极制作的传感器与无修饰传感器相比,响应灵敏度提高了2倍,且对1.1～33.3 mmoL/L的葡萄糖待测样本,RSD均＜7%,稳定性良好,有较高的应用价值.通过实验分析了CB-g-PSS以不同方式修饰电极的工作机理,结果表明,选择正确的修饰方式,能够发挥CB-g-PSS的导电效应及纳米效应,使其有利于酶的固定,提高响应灵敏度并改善酶促反应动力学特性.     

裂解酞菁铁和乙烯制备取向碳纳米管阵列

采用热化学气相沉积(TCVD)法裂解酞菁铁(FePc)和乙烯(C2H4)制备出高210 μm的取向碳纳米管阵列(ACNTA). 用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱和X射线光电子能谱(XPS)对制备的样品进行了表征, 系统研究了反应温度、反应时间、C2H4流量对ACNTA生长的影响. 结果表明, 样品具有高取向性且纯度高. 800 ℃是裂解FePc和C2H4制备ACNTA的最优温度, 催化剂的活性可以保持较长时间(60 min), 通入C2H4促进了ACNTA的快速生长, 最适合流量为50 cm3/min.     

碳包裹纳米（fe，ni）粒子的制备与磁性

采用D113离子交换树脂与Ni2 、Fe2 交换后形成含金属的Fe-Ni/D113前驱体,经热解制备碳包裹纳米FeNi合金粒子。TG分析表明,Fe-Ni/D113的热稳定性要强于D113。XRD、TEM测试结果表明,在400、500、600和700℃热解Fe-Ni/D113均可获得碳包裹纳米FeNi合金粒子,而且纳米FeNi合金粒子的粒径随热解温度的升高而增大。室温磁性能测试结果表明,400℃热解产物具有超顺磁特性,500、600和700℃热解产物的矫顽力Hc均远大于相应的块体金属,并与产物中纳米FeNi合金粒子的尺寸有关;所有热解产物比饱和磁化强度Ms小于相应的块体材料,并随其中纳米合金粒子尺寸的增大而增加。     

纳米铂直接修饰玻碳电极的制备及在半胱氨酸中的电化学行为

采用一步化学原位还原法将球形纳米铂颗粒直接修饰在玻碳电极上,用SEM、EDS和电化学方法对该电极进行表征并与铂片电极、裸玻碳电极进行了对比。结果表明,纳米铂修饰电极的峰电流与扫描速度呈线性关系,纳米铂在电极表面覆盖率为1.28×10-7mol/cm2。循环伏安法研究结果表明纳米铂修饰电极对半胱氨酸的催化氧化作用和铂片电极相比提高了数倍,且峰电位负移了0.3V。在纳米铂修饰的玻碳电极上,半胱氨酸的浓度在1.0×10-7mol/L到1.0×10-5mol/L范围内和催化电流呈线性关系。