多壁碳纳米管-Nafion复合膜修饰玻碳电极测定硝苯地平的研究

研制了以Nafion分散羧基化多壁碳纳米管的化学修饰电极(Nafion-MWCNTs/GC),研究了硝苯地平(NIF)在修饰电极上的电化学行为和测定方法。实验结果表明,在0.1mol/LNH3-NH4Cl(pH9.6)溶液中,Nafion-MWCNTs/GC,对NIF具有明显的催化和增敏作用,还原峰电位由-0.85V(裸电极)正移到-0.75V(vs.AgCl/Ag)(修饰电极),灵敏度增加约7倍。对各种实验条件进行了优化。定量测定的线性范围为2.5×10-7~4.5×10-5mol/L,r为0.9974;检出限为8.0×10-8mol/L。探讨了NIF在Nafion-MWCNTs/GC上的电极过程和反应机理,测得在本体系中参与反应的质子数和电子转移数均为4,电子转移系数α为0.41。对NIF药片进行了测定,回收率为94.5%~101.0%。     

玻碳电极吸附伏安法测定痕量硫化物的研究

研究了利用玻碳电极吸附伏安法测定痕量硫化物的新方法。在含高铁离子的酸性溶液中,硫化物与对-氨基苯二甲基盐酸盐(p-ADAD)反应生成亚甲基蓝,采用线性扫描伏安法亚甲基蓝于-0.30 V(vs.SCE)在玻碳电极上出现灵敏的还原峰,峰电流与S2-浓度在0～25μg/mL范围内呈良好的线性关系。优化了实验条件,研究了电极反应机理。该方法具有灵敏、简便、快速、避免汞污染等特点。已成功用于多种水样中痕量硫化物的测定,回收率为98.0%～104.6%,结果令人满意。     

电化学氧化赖氨酸应用于改变碳表面荷电状态

电化学氧化赖氨酸应用于改变碳表面荷电状态;表面改性;玻碳;赖氨酸单层膜;循环伏安;静电排斥作用     

Preparation of a Carbon-Coated SPME Fiber and Application to the Analysis of BTEX and Halocarbons in Water

A carbon-coated fiber for solid-phase microextraction (SPME) has been prepared from powdered activated carbon (PAC) and a fused-silica fiber. Scanning electron microscopy of the coating revealed the carbon particles were uniformly distributed on the surface of the fiber substrate. Efficient extraction of BTEX (benzene, toluene, ethylbenzene, p-xylene, and o-xylene) and halocarbons (chloroform, trichloroethylene, and carbon tetrachloride), with short extraction and desorption times, was achieved by use of the coated fiber. The maximum working temperature of the coated fiber was 300 °C and the lifetime was over 140 desorption operations at 260 °C. Limits of quantification (LOQ) of the SPME method for the eight analytes ranged from 0.01 to 0.94 μg L⁻¹, and relative standard deviations (RSD) were below 7.2% (n=6). Recoveries were 87.9–113.4% when the method was applied to the analysis of BTEX and the halocarbons in real aqueous samples. An erratum to this article is available at .     

Liquid-Phase Hydrogenation of Chloronitrobenzene Over Pt-Sn-B Amorphous Catalyst Supported by Carbon Nanotubes

The Pt-Sn-B/carbon nanotubes (CNTs) catalyst was prepared by impregnation-chemical reduction method. Its catalytic performance was evaluated by liquid-phase hydrogenation of chloronitrobenzene (CNB). The results showed that the catalyst had higher catalytic performance than common hydrogenation catalysts. The conversion of CNB could reach 99.9%, and the dechlorination of chloroaniline (CAN) was less than 1.9% when catalyzed by Pt-Sn-B/CNTs and more than 8.0% when catalyzed by common hydrogenation catalysts. X-ray diffraction and selected area electron diffraction analysis showed that Pt-Sn-B/CNTs had an amorphous alloy structure that can improve catalytic performance. Transmission electron micrograph image showed that the catalyst particles were highly distributed on the surface of CNTs. The hydrodechlorination of CNB was mainly affected by the unique structure of CNTs and the nature of the amorphous metals on the surface of CNTs. The relationship between the interaction of CNTs and amorphous metals and the catalytic performance of the catalyst is also discussed. Translated from the Chinese Journal of Catalysis, 2005, 26(3) (in Chinese)     

Isotropic transition behaviour of an amphiphilic di-block copolymer under pressure

The present work deals with the interactions between carbon dioxide, used as pressure medium, either in the gas state (GCO₂) or in the supercritical state (SCCO₂) and amphiphilic di-block copolymers PEO_m-b-PMA(Az)_n. The effect of pressure on the isotropic transition of the PEO_m-b-PMA(Az)_n copolymer was investigated using scanning transitiometry (ST). The experimental results were compared with those measured when using ‘relatively inert’ mercury (Hg) as pressure medium. Morphological observation of a PEO_m-b-PMA(Az)_n thin film submitted to SCCO₂ was performed by atomic force microscopy (AFM) to investigate the nano-structure organization. These results indicate the possibility of modifying the nano-structure in a specific way depending on the CO₂ physical state.     

热历史对聚醚醚酮及其碳纤维复合材料——Ⅱ.熔融行为的影响

本文利用差示扫描量热仪(DSC)研究了聚醚醚酮(PEEK)和以PEEK为基体的碳纤维复合材料(APC-2)的热历史对它们熔融行为的影响。在200—315℃结晶并退火热处理后,试样的DSC曲线上出现了两个吸热峰。低温吸热峰(峰温T′_m)较小,并与结晶和退火温度(T_c)有关;高温吸热峰(峰温T_m)较大,几乎不受T_n的影响。T′_m的出现与在不同T_c下生成的不完整晶体的熔融和重结晶过程有关,而T_m的出现则与完整晶体的熔融过程有关。实验结果表明,T′_m与T_c之间呈线性关系。按文献报道的方法,将T′_m与T_c的直线外推至与T′_m=T_c直线相交,其交点温度即为平衡熔点.结果表明,PEEK和APC-2试样的“平衡熔点”受不同热历史条件下生成晶体的完整程度的影响。当结晶并退火时间越长,求出的“平衡熔点”值越低,并与理论值接近。实验结果还表明,碳纤维表面具有促进PEEK树脂基体晶体完整化的作用,因而导致APC-2试样中PEEK树脂基体的熔点高于纯PEEK树脂。     

担载Ru_3（CO）_（12）－Fe_2（CO）_9混合簇的脱羰基作用和表面加氢反应

担载于ＺｒＯ２上的Ｒｕ３（ＣＯ）１２－Ｆｅ（ＣＯ）９混合簇的红外光谱表明，Ｒｕ３（ＣＯ）１２以Ｒｕ（ＣＯ）２Ｏ２表面络合物存在．混合族在真空中随温度升高而发生脱羰基作用，５００℃左右羰基完全脱掉；以Ａｌ２Ｏ３为载体者其羰基不易脱除，升高温度出现多种羰基带．混合簇中的Ｆｅ２－（ＣＯ）９极易脱羰基．担载混合簇在Ａｒ气中进行ＴＰＤＥ时，低温时以脱羰基为主，高于１５０℃时发生表面歧化反应而生成ＣＯ２；在Ｈ２气中，低温时仍以脱羰基为主，高于１５０℃时发生表面加氢反应而生成ＣＨ４．混合簇的脱羰基和表面反应能力与Ｒｕ／Ｆｅ比及载体有关．担载混合簇在ＣＯ加氢反应中以Ｒｕ（ＣＯ）２Ｏ２和分散Ｆｅ存在，还出现－ＣＨｘ多种表面物种．     

炭担载的Mo和CoMo加氢脱硫催化剂

用仲钼酸铵和酸钴水溶液浸渍方法将ＭｏＯ３和ＣｏＯ担载在少在性炭担体上，制成Ｍｏ／Ｃ和ＣｏＭｏ／Ｃ催化剂。运用ＤＴＡ，ＸＰＳ，ＦＴ－ＬＲＳ等手段考察了ＭｎＯ３在活性炭担体表面的分散状态及Ｈ２还原能力随ＭｏＯ３含量的变化，并在中压固定床反应装置上测定了催化剂的噻吩加氢脱硫和环己烯加氢反应活性。     

原子吸收光谱法测定气样中一氧化碳的研究

本文研究了用自制Ｎｉ（ＣＯ）４发生管和电加热石英管原子化器间接测定一氧化碳的条件，探讨了Ｎｉ（ＣＯ）４的产生和在石英管中原子化效率及干扰消除。