Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Molecular orbital study for Na, Mg, and Al adsorption on the Si (111) surface

We investigated the interactions between the Si(111) surface and the Na, Mg, and Al atoms using cluster model calculations. Calculations were performed at levels of complete-active-space self-consistent-field (CASSCF) and multi-reference singly and doubly excited configuration interaction (MRSDCI) calculations using the model core potential method. Our calculations revealed that the most favorable sites of Na, Mg, and Al adsorption on Si(111) are on top (T₁), bridge (B₂), and 3-fold filled (T₄) sites, respectively. The nature of chemical bonds between these metal atoms and the dangling bonds of the surface Si atoms are found to be essentially covalent.     

Covalent Structures of Phosphorus: A Comprehensive Theoretical Study

Starting from earlier work by Baudler we introduce a chemical heuristic for the systematic deduction and classification of covalent partial structures of phosphorus in polycyclic phosphanes, phosphorus-rich polycyclic phosphides, and allotropes of phosphorus except the black forms. This approach is used to direct ab initio techniques (which also confirm the rules) in the quest for as yet unknown forms of molecular or macromolecular phosphorus. Based on calculated stabilities of systematically generated structural alternatives we rationalize the stabilities of Hittorf's phosphorus and of molecular P₄, confirm the possible existence of at least one other crystalline allotropic form of phosphorus, and provide insight into the probable structure of amorphous red phosphorus. In total, the combined approach of chemical heuristics and large scale ab initio calculations presented in this work supplies a coherent chemical understanding of covalent polyphosphorus structures.     

Determination of 3-sulfolene in sulfolane by reaction gas chromatography

Summary A simple gas-liquid chromatographic method has been developed for determining 3-sulfolene in sulfolane. The method involves thermal decomposition of sulfolene and determination of the 1.3-butadiene evolved, by GLC. Influence of the operating parameters on quantitative decomposition of sulfolene has been studied. The accuracy of the method as studied in the concentration range from 0.05 to 4.0 % (w/v) of 3-sulfolene in sulfolane is found to be within ±3.0%. It is rapid and sensitive down to 10 ppm and has potentialities for on-line applications also.

---

Bestimmung von 3-Sulfolen in Sulfolan durch Reaktions-Gas-Chromatographie

Zusammenfassung Eine einfache gas-chromatographische Methode wurde entwickelt, die auf der thermischen Zersetzung der Probe und der Bestimmung des dabei aus 3-Sulfolen gebildeten 1,3-Butadiens beruht. Der Einfluß der einzelnen Parameter wurde untersucht. Innerhalb eines Konzentrationsbereichs von 0,05–4,0% 3-Sulfolen ergaben sich Fehler von ±3%. Das Verfahren ermöglicht bis herab zu 10 ppm eine schnelle und empfindliche Bestimmung und eignet sich auch zum on-line Betrieb.

     

Estimation of micropore size distribution in active carbons from adsorption isotherms of water vapor

A possibility of estimation of the micropore size distribution in the carbon adsorbents with the developed micro-and mesoporous structure by analysis of the adsorption isotherms of water vapors was considered. At saturation water condenses in micropores in a form of a weakly compressed liquid. However, water molecules in micropores are packed not so closely as in the liquid because of steric hindrance. Therefore, the real density of water adsorbed in the micropores is lower than that of water adsorbed on an open surface and lower than the density of the normal liquid. An analysis of the adsorption isotherms of water vapors with account for the both opposite effects on the water density gives reliable data on the micropore sizes of the carbon adsorbents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 40–43, January, 2007.     

ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

1. INTRODUCTION Reclamation of gold in liquid of gold with activated carbon fiber (ACF) is reported. ACF possessed numerous advantages, such as high adsorption capacity, great adsorption rate and high recovery of gold. It was generally considered tha…     

Thin-layer adsorption chromatography with mixed mobile phases. 4. Extension of Ościk's equation to heterogeneous adsorbents

In this paper the equation for thin-layer adsorption chromatography with multicomponent mobile phases, proposed by O?cik in 1965 is extended to energetically heterogeneous solid surfaces. Other forms of this equation, more convenient in practical applications, are presented. Model calculations are made for TLC with binary mobile phases according to the modified form of O?cik's equation. Finally, this equation is compared with that of Snyder.     

Facile S-alkyl thiocarbamate synthesis by a novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur

A novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamates. In the presence of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), S-alkyl thiocarbamates are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20°C). In the absence of DBU, however, no formation of S-alkyl thiocarbamate is observed. The present DBU-assisted carbonylation can also be applied to new synthetic methods for benthiocarb and orthobencarb (herbicides) and carbamoyl chlorides.     

Novel design of a pentacyclic scaffold as structural mimic of saframycin A

The design, synthesis and evaluation of a pentacyclic scaffold, CWO-324 to mimic saframycin A is described. CWO-324 is readily synthesized in five steps from 1,4-diacetyl-piperazine-2,5-dione and 2,5-dimethoxybenzaldehyde. CWO-324 was found to scission DNA, binds to bases 69-83(5′-GCAGTCAGG CACCGT-3′) of Hind III/Rsa I from plasmid pBR322 DNA in a foot-printing study and possesses anti-tumor activity.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.