Synthesis and optical and electrochemical properties of copolymers containing 9,9‐dihexylfluorene and 9‐dimethylaminopropylcarbazole chromophores

Soluble and well‐defined 9,9‐dihexylfluorene and 9‐dimethylaminopropylcarbazole based copolymers PFCN and 5PFCN have been prepared by Suzuki coupling polymerization. For comparison, alternate copolymer of 9,9‐dihexylfluorene and 9‐hexylcarbazole (PFC) was also prepared with the same method. Furthermore, alternate copolymer of 9,9‐dihexylfluorene and 9‐dimethylethylammoniumpropylcarbazole (PFCNE) was prepared from PFCN by the ethylation of its dimethylaminopropyl groups with bromoethane. These copolymers were soluble in organic solvents and showed high glass‐transition temperatures (75–160 °C). The optimized architecture of PFCN from a simulation was a spiral, which was different from the linear structure of poly(9,9‐dihexylfluorene) (PFO). Thermogravimetric analysis showed that the residual weights of 5PFCN, PFCN, PFC, and PFCNE at 800 °C were all greater then 50%, whereas PFO showed complete thermal decomposition. Both the absorption and photoluminescence emission peaks of these copolymers showed blueshifts after the introduction of the carbazole units because of reduced conjugation. Moreover, the introduction of 9‐hexylcarbazole and 9‐dimethylamionpropylcarbazole moieties into copolymers PFC and PFCN, respectively, effectively prevented the excimer formation of PFO. According to cyclic voltammetry results, PFCNE containing quaternary amino pendant groups exhibited the most stable reduction–oxidation cycles. The turn‐on electric fields of their electroluminescence devices decreased with increasing carbazole content because of the more balanced carrier injection. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3882–3895, 2006     

Synthesis and characterization of light‐emitting oligo(p‐phenylene‐vinylene)s and polymeric derivatives containing three‐ and five‐conjugated phenylene rings. II. Electro‐optical properties and optimization of PLED performance

A series of multilayer polymeric light‐emitting diodes (PLEDs) containing an electron‐transporting layer (ETL), that is tris(8‐quinolinolato)‐aluminum(III) (Alq) and 2,2′,2″‐(1,3,5‐phenylene)‐tris[1‐phenyl‐1H‐benzimidazole] (TPBI), were fabricated by doping fluorescent oligo(p‐phenylene‐vinylene)s (BIII and BV) and polymer derivatives (PBV) into poly(N‐vinyl carbazole) (PVK). These PLEDs can be optimized by the design of multilayer device configurations (brightness increased 8–15 times by addition of ETL) and possess greenish electroluminescent (EL) spectra peaked about 500–540 nm. A remarkably high brightness of 56,935 cd/m² with a power efficiency of 3.25 lm/W was obtained in the device of PVK:BVOC₈‐OC₈ (100:20)/Alq (60 nm/60 nm). It suggests that the emission mechanism (including the conjugated and excimer emissions of BVOC₈‐OC₈ emitters) originates from both of BVOC₈‐OC₈ and ETL (Alq and TPBI) by varying the concentration of chromophores and adjusting the thickness of ETL. The concentration effect of the emitters in PVK (i.e. PVK:BVOC₈‐OC₈ = 100:5, 100:20, and 100:100 wt %) and the influence of the ETL (including its thickness) on the EL characteristics are also reported. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2922–2936, 2006     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

Synthesis and properties of carbazole‐layered polymers

New aromatic ring‐layered polymers consisting of carbazole as a layered aromatic group and xanthene as a scaffold were designed and synthesized via the Sonogashira–Hagihara coupling reaction. Their optical and electrochemical behaviors were investigated in detail; the results showed that these polymers could be used as hole‐transporting materials. Polymers with nitrobenzene moieties at the polymer chain ends quenched the emission from the layered carbazoles to the nitrobenzene termini; thus, the polymers acted as the molecular wire that transferred photoexcited energy and/or electrons to the polymer termini. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4279–4288, 2009     

水溶性荧光高分子乙烯基咔唑－丙烯酸共聚物的合成及荧光测试

用偶氮二异丁腈作引发剂，使Ｎ－乙烯基咔唑和丙烯酸甲酯在苯中共聚合，该共聚物在四氢呋喃中用氢氧化钠水溶液水解，得到水溶性乙烯基咔唑－丙烯酸共聚物。该共聚物的水溶液在３７３ｎｍ处产生较强的荧光，其荧光强度随溶液ｐＨ值增大而增强，在该高分子水溶液中，加入少量阳离子表面活性剂，其量子产率可提高７倍，微量重金属离子（Ｈｇ（２＋））对荧光有一定的熄灭作用。荧光强度（ｌｏｇＩ０／Ｉ）与Ｈｇ（２＋）的浓度呈线性关系。     

Fluorescence excitation spectra of jet-cooled carbazole complexes with monohydric alcohols

We have analyzed the fluorescence excitation spectra of carbazole complexes with a single molecule of methyl, deuterated methyl, ethyl, and propyl (1-propanol and 2-propanol) alcohols, cooled in a supersonic jet. We have determined the shifts in the fluorescence excitation spectra of the complexes relative to the frequency of the purely electronic transition of unbound carbazole. They occur as a result of formation of hydrogen bonds between the N-H group of the carbazole and the OH group of the alcohols. The frequencies of stretching vibrations of the hydrogen bonds with different alcohols vary within the range 150–157 cm⁻¹, while the frequencies of the bending vibrations vary in the range 21–22.9 cm⁻¹. From the shape of the rotational contours of the bands for the purely electronic and vibronic transitions of the complexes, we determined that they belonged to rotational conformers. We calculated the equilibrium configurations of the complexes in the ground state. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 756–760, November–December, 2007.     

含咔唑生色团的三聚磷腈分子玻璃的合成

含咔唑生色团的三聚磷腈分子玻璃的合成;三聚磷腈;后重氮偶合;咔唑;光折变分子玻璃     

Diphenyldiselenide As Novel Non–salt Photoinitiator for Photosensitized Cationic Polymerization of N-Vinyl Carbazole

Photoinitiated cationic polymerization of N-vinyl carbazole (NVC) with diphenyldiselenide (DPDS) as an initiator and aromatic nitriles such as dicyanonaphthalene (DCN) and dicyanoanthracene (DCA) as sensitizer was studied at λ > 290 nm in CH₂Cl₂ solvent using single electron transfer (SET) reactions in this investigation. Aromatic nitriles were found to be effective photosensitizer in initiating polymerization at wavelength λ > 290 nm where DPDS (λ_max = 246 nm) do not absorb. However, the DPDS works well as an initiator with both DCN and DCA. An initiation mechanism is also proposed that involves the formation of selenium radical cation as actual initiating species. Upon photoirradiation, these radical cations are formed by single electron transfer between the excited singlet state sensitizer and the ground state of DPDS.     

Novel π‐Electron Extension System via Chromophores Self‐Polymerization to Enhance the NLO Efficiency

A new strategy for the self‐polymerization of chromophores is investigated to develop a 2,7‐carbazole‐based nonlinear optical (NLO) conjugated polymer with an increasing conjugation length of chromophores. Elongation of the conjugation‐path length in chromophores has established engineering guidelines to enhance optical nonlinearity. Compared with the traditional synthesis of an NLO polymer, the chromophores should be well‐designed at a limited conjugation spacer, and then incorporated into a polymer matrix. In this research, the π‐conjugation spacer of chromophores extended perpendicularly to the dipole of chromophores during the polymerization process. Furthermore, this study marks the first research of integrating the π‐electrons of chromophores and conjugated polymers. These conjugated backbones promote a bulk‐polarization response, leading to large NLO coefficients.

     

V形咔唑衍生物的合成及荧光性质

以N-烷基咔唑作为电子给体和共轭桥中心, 二米基硼作为端基电子受体, 合成了两个V形A-π-D-π-A型新化合物: 3,6-二{[(E)-2-(5-二米基硼)噻吩]乙烯基}-N-丁基-咔唑 {N-butyl-3,6-bis{(E)-2-[5-(dimesitylboryl)thiophen-2-yl]-vinyl}-carbazole, BBTC}和3,6-二[(E)-(4-二米基硼)苯乙烯基]-N-己基-咔唑, {N-hexyl-3,6-bis[(E)-4-(dimesitylboryl)-styryl]-carbazole, BBSC}. 这两个化合物在蓝绿光波段都有较强的荧光发射. 光谱数据表明, 扩大共轭体系并在端基引入含硼基团导致吸收谱和发射谱显著红移, 并增大分子内电荷转移.