[Na(18-C-6)]2[Cu(i-mnt)2]的合成与结构分析

研究了18-冠-6与Na2[Cu(i-mnt)2][i-mnt=异丁二腈烯二硫醇阴离子,S2CC(CN)2-2]的反应,得到的配合物[Na(18-C-6)]2[Cu(i-mnt)2](1)通过元素分析、红外光谱、X射线单晶衍射进行了结构分析.配合物为单斜晶系,空间群P2(1)/c.晶体学结构数据a=1.2819(11),b=1.1793(10),c=1.4928(13)nm,β=99.121(16)°,V=2.228(3)nm3,Z=2,Dcaled.=1.369g/cm3,F(000)=958,R1=0.0521,wR2=0.1003.1中的[Cu(i-mnt)2]基团通过配体i-mnt的氮原子与两个[Na(18-C-6)]基团中的钠原子成键,形成稳定的中性配合物.     

A solvent-free synthesis of coumarins using a Wells-Dawson heteropolyacid as catalyst

Substituted coumarins are synthesized from phenols and β-ketoesters by the Pechmann reaction, using a Wells-Dawson heteropolyacid (H₆P₂W₁₈O₆₂·24H₂O) as catalyst by a solvent-free procedure. This one requires low reaction times, 130 °C temperature and as little as 1 mol % of Wells-Dawson acid, obtaining good to excellent yields of coumarins. The catalyst showed to be reusable with no differences in the yields. The results are compared with those of the reactions performed in toluene solution. The presented synthetic procedure is a convenient, clean and fast alternative for synthesizing 4-substituted coumarins (17 examples).     

MATLAB/SIMULINK在电力系统仿真中的应用

介绍了Matlab／Simulink仿真工具在电力系统仿真中的应用方法．     

2-乙酰氨基-3,4,6-三乙酰葡萄糖的合成

细菌内毒素(ＬＰＳ)是革兰氏阳性阴性菌细胞外膜层的主要成分,由其引起的革兰氏阴性杆菌脓度症和休克是导致战创伤病人死亡的主要原因之一。而从类脂Ａ(ＬｉｐｉｄＡ)的结构出发,以非肽类物质拮抗内毒素受体ＣＤ-14为治疗手段的研究在国外刚刚起步。2-乙酰氨基-3,4,6-三乙酰葡萄糖是合成ＬｉｐｉｄＡ结构类似物的重要中间体[1,2]。它的合成一般是通过氨基葡萄糖五乙酸酯的选择性水解[3-6]脱去一个乙酰基得到。氨基葡萄糖五乙酸酯是通过氨基葡萄糖的乙酰化反应得到的,由于氨基葡萄糖不稳定,一般是用氨基葡萄糖的盐酸盐作为起始原料。由于…     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005