Equations for calculation of the pH of buffer solutions containing sodium or potassium dihydrogen phosphate, sodium hydrogen phosphate, and sodium chloride at 25°C

Published thermodynamic data measured in aqueous mixtures of sodium or potassium dihydrogen phosphate with hydrogen phosphate and chloride at 25°C were used to test recently developed methods for calculation of the pH of phosphate buffer solutions. Equations for ionic activity coefficients are used in these methods. It is shown that all data used in the tests up to an ionic strength of about 0.5 mol-kg^-1 can be accurately predicted by the two methods recommended. In one of these methods, equations of the Hückel type are used for ionic activity coefficients and in the other equations of the Pitzer type. Several sets of phosphate buffer solutions are recommended,e.g., for calibrations of glass electrode cells. In the recommended sets, the pH of the buffer solutions can be calculated either by the Hückel or Pitzer method, and the pH predictions of these methods agree in most cases within 0.005 at least up to ionic strengths of about 0.2 mol-kg^-1. The pH values of the two primary pH standards endorsed by IUPAC based on aqueous mixtures of KH₂PO₄ and Na₂HPO₄,i.e., pH values of 6.865 and 7.413, can also be accurately predicted by the equations recommended in this study.     

Acoustic absorption in aqueous potassium phosphate

Measurements of acoustic absorption and velocity as a function of frequency and concentration in KH₂PO₄–K₂HPO₄ buffers at 4°C and pH 5-7 are reported. The dependence of the observed acoustic relaxation parameters on concentration is consistent with that to be expected from perturbation of a monomer-dimer equilibrium with an equilibrium constant [for 2H₂PO ₄ ^– (H₂PO₄)₂ ^2–] of 0.21 M^–1, a bimolecular rate constant of 5×10⁸ M^–1-sec^–1 and a standard volume change of –5 cm³ mole. The equilibrium constant for H₂PO ₄ ^– + HPO₄ ^2–H₃(PO₄)₂ ^3– is estimated to be 0.7 M^–1.     

Nitrate ion association with Nd3+

The overall stability constantsK ₁ andK ₂ of NdNO ₃ ²⁺ and Nd(NO₃) ₂ ⁺ complexes were determined (K ₁=1.77;K ₂=1.28) using an extraction method with tri-n-butyl phosphate as the extractant. The ratio ₁/₂ of the stepwise stability constants is discussed. It was established that the Nd(NO₃) ₂ ⁺ complex was an outer-sphere ion pair.

---

Die Assoziation von Nitrat-Ion mit Nd³⁺

Zusammenfassung Mittels einer Extraktionsmethode wurden die StabilitätskonstantenK ₁ undK ₂ von NdNO ₃ ²⁺ - und Nd(NO₃)⁺-Komplexen bestimmt (K ₁=1.77;K ₂=1.28; Tri-n-butylphosphat als Extraktionsmittel). Das Verhältnis ₁/₂ der stufenweisen Stabilitätskonstanten wird diskutiert. Es stellte sich heraus, daß der Nd(NO₃)⁺-Komplex als ein Outer-Shere-Ionenpaar vorliegt.

     

Hydraulic activity of C4A3Cr in presence of C4A3S

This paper deals with synthesis and assessment of the hydraulicity of C₄A₃Cr, analog phase C₄A₃S to , relevant to the phase chemistry and properties of sulfoaluminate cements. C₄A₃Cr, synthesized at 1250 °C is well crystallized phase, latently hydraulic, with hydration accelerated in the presence of C₄A₃S, or CS. Calorimetric curves show reciprocal influence of sulfate and chromate phase in hydration of C₄A₃S-C₄A₃Cr system. The total heat expressed at hydration is nearly the same for all specimens, but the rate of heat evolution depends on the ratio of C₄A₃S/C₄A₃Cr phases. X-ray diffraction pattern and DTA curves showed that, increasing content of C₄A₃Cr in hydrating mixture results in a coexistence of two types of ettringite (chromate and sulfate ettringite) hydrogarnet, gibbsite and monosulfate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Specific surface of two hydrated cements differing in strength

Specific surface, S, of CSH-gel particles of disordered layered structure, was studied by water sorption/retention in two cement pastes differing in strength, i.e. C-33 (weaker) and C-43 (stronger), w/c=0.4. Hydration time in liquid phase was t _h=1 and 6 months, followed by hydration in water vapour either on increasing stepwise the relative humidity, RH=0.5→0.95→1.0 (WS) or on its lowering in an inverse order (WR). Specific surface was estimated from evaporable (sorbed) water content, EV (110°C), assuming a bi- and three-molecular sorbed water layer at RH=0.5 or 0.95, respectively (WS). On WR it was three- and three- to four-molecular (50 to 75%), respectively, causing a hysteresis of sorption isotherm. At RH=0.5 the S increased with cement strength from 146 m² g^-1 (C-33, 1 m) to 166 m² g^-1 (C-43, 1 m) and with hydration time to 163 (C-33, 6 m) and to 204 m² g^-1 (C-43, 6 m). At RH=1.0 (and 0.95), higher S-value were measured but these differences were smaller: S amounted to 190-200 m² g^-1 in C-33 (1 and 6 m) and 198-210 m² g-1 in C-43 (1 and 6 m). Thus no collapse occurred on air drying of paste C-43 (6 m). This revised version was published online in July 2006 with corrections to the Cover Date.     

Neue acetonylsubstituierte Azole II. 3-Acetonyl-1,2,4-oxadiazole, 2-Acetonyl-1,3,4-oxadiazole und 5-Acetonyl-1,2,4-thiadiazole

3-Acetonyl-1,2,4-oxadiazoles and 2-acetonyl-1,3,4-oxadiazoles are accessible starting with the ketal of acetoacetamide oxime and the ketal of acetoacetic acid hydrazide, respectively. 5-Acetonyl-1,2,4-thiadiazoles are obtained from 5-chloro-1,2,4-thiadiazoles andtert.-butyl acetoacetate. These Acetonyl-azoles are starting materials for three series of azolylvinyl phosphates and phosphonates.

Herrn Prof. Dr.Klaus Weissermel zu seinem 60. Geburtstag.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.     

Microgels and ionic associations in solutions of cellulose diacetate

Solutions of cellulose diacetate (CDA) from two sources (cotton linters and wood pulp Floranier) were analysed in various solvents by size exclusion chromatography (SEC). Without special precautions, the SEC chromatograms presented three peaks — or prehumps — before the main polymer peak. The first prehump which could be eliminated by ultracentrifugation corresponded to microgels whose sugar composition was determined. These microgels were also investigated by electron microscopy, X-ray and electron diffraction analysis. They corresponded mainly to cellulose triacetate (CTA-II) in the case of CDA from cotton linters and a mixture of CTA-II and xylan diacetate (XDA) in the case of CDA from the wood pulp Floranier. The second and third prehumps could be attributed to ionic effects corresponding to the association of remaining sulfate groups on the CDA molecules with residual calcium. It was found that these ionic effects could be eliminated by the addition of LiBr or LiCl to the elution solvents. This led to chromatograms devoid of prehumps.Presented in part at the Cellulose '91 meeting in New Orleans.     

Excess molar enthalpies of binary mixtures for (tributyl phosphate+methanol/ethanol) at 298.15 K

Excess molar enthalpies of binary mixtures for tributyl phosphate (TBP)+methanol/ethanol were measured with a TAM air Isothermal calorimeter at 298.15 K and ambient. The results for xTBP+(1–x)CH₃OH are negative in the whole range of composition, while the values for xTBP+(1–x)C₂H₅OH change from positive values at low x to small negative values at high x. The experimental results have been correlated with the Redlich–Kister polynomial. IR spectra of the mixtures were measured to investigate the effect of hydrogen bonding in the mixture.     

L-谷氨酸、甘氨酸二元、三元体系中铽(Ⅲ)、钙(Ⅱ)的化学形态研究

在模拟生理条件下 (37℃ ,I=0 .1 5mol/ L Na Cl) ,用 p H电位法研究了铽 ( )、钙 ( )与 L-谷氨酸、甘氨酸二元、三元体系。确定了体系存在的物种 ,测定了体系中配合物的稳定常数。讨论了上述二元、三元体系中铽 ( )、钙 ( )的物种分布特点。