Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

钙钛矿型复合氧化物Ca_xSr_（1－x）TiO_3催化剂上的甲烷氧化偶联反应

在固定床反应器上，评价了不同温度下钙钛矿型复合氧化物ＳｒＴｉＯ３和ＣａＴｉＯ３的组成变化对甲烷氧化偶联反应的影响．同时，利用ＸＰＳ和ＣＯ２－ＴＰＤ对催化剂的结构及其氧物种的反应特性进行了表征．结果表明：ＳｒＴｉＯ３和少量Ｃａ掺杂的ＣａｘＳｒｌ－ｘＴｉＯ３有利于在较低温度（９２３Ｋ）下催化反应的活性和选择性，而ＣａＴｉＯ３体系则在高温（１０７３Ｋ）下表现出较好的活性和选择性．钙钛矿型复合氧化物ＳｒＴｉＯ３和ＣａＴｉＯ３组成变化对不同温度下反应活性的影响与ＣＯ２－ＴＰＤ的脱附谱图有很好的平行关系．     

甲烷在SrO-La2O3/CaO催化剂上的氧化偶联Ⅱ.反应动力学的研究

在２０％Ｌａ２Ｏ３／ＣａＯ（ＬＣ）催化剂中添加ＳｒＯ（添加ＳｒＯ的ＬＣ以ＳＬＣ表示）明显地提高了反应活性和Ｃ２选择性。反应动力学研究表明，ＬＣ和ＳＬＣ催化剂在甲烷氧化偶联反应中，在表观活化能和表观反应级数上存在很大的差异。ＬＣ催化剂在ＣＨ４转化以及Ｃ２和ＣＯｘ形成过程中，表观活化能大于ＳＬＣ催化剂，而ＳＬＣ催化剂的指前因子小于ＬＣ体系，两者存在着补偿形象。ＳＬＣ催化剂的反应速率常数比ｋｃ２／ｋＣＨ     

XPS study of interactions between linear carbon chains and colloidal Au nanoparticles

1. Download : Download high-res image (158KB)
2. Download : Download full-size image

     

Hydraulic activity of C4A3Cr in presence of C4A3S

This paper deals with synthesis and assessment of the hydraulicity of C₄A₃Cr, analog phase C₄A₃S to , relevant to the phase chemistry and properties of sulfoaluminate cements. C₄A₃Cr, synthesized at 1250 °C is well crystallized phase, latently hydraulic, with hydration accelerated in the presence of C₄A₃S, or CS. Calorimetric curves show reciprocal influence of sulfate and chromate phase in hydration of C₄A₃S-C₄A₃Cr system. The total heat expressed at hydration is nearly the same for all specimens, but the rate of heat evolution depends on the ratio of C₄A₃S/C₄A₃Cr phases. X-ray diffraction pattern and DTA curves showed that, increasing content of C₄A₃Cr in hydrating mixture results in a coexistence of two types of ettringite (chromate and sulfate ettringite) hydrogarnet, gibbsite and monosulfate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Carbonat-isostere Anionen [SnX3]5− in den Verbindungen Rb6[SnX3]O0,5 und Cs6[SnX3]O0,5 mit X = As,Sb und Bi

Carbonate Isostructural Anions [SnX₃]^5? in the Compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi The metallic shining compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi were prepared from the melt starting from adequate mixtures of the elements and SnO₂. They crystallize in the hexagonal system (space group P6₃/mmc, No. 194, Z = 2) with the lattice constants mentioned in ?Inhaltsübersicht”?. In the structures of the isotypic compounds tin and the main group(V) elements build up trigonal planar anions [SnX₃]^5? with X = As, Sb, and Bi isostructural to the carbonate anion, oxygen forms isolated O^2? ions. The bond lengths Sn? X are significantly shortened with respect to the sums of Pauling covalent radii. The atoms of the units [SnX₃]^5? are coordinated by alkali metal cations forming trigonal prisms and the O^2? anions occupy octahedral holes.     

Ab initio and DFT studies on tautomerism of indazole in gaseous and aqueous phases

Electronic structure of optimized Ge₅, Ge₁₇, Ge₅–O and Ge₅ embedded in SiO₂ nanoparticles have been studied by density functional theory to find out the effect of cluster size and Ge–O bond(s) on the optical energy gap between LUMO and HOMO. It was found that the optical energy gap depends on both cluster size and the number of Ge–O bonds nonlinearly. The optical energy gap was found to be in visible light range when the Ge₅ nanoparticle has been embedded in SiO₂ matrix.     

Metal Nanoparticles on Stainless Steel Surfaces as Novel Heterogeneous Catalysts

The goal of this work was the development of a novel type of heterogeneous catalyst, consisting of bare metal nanoparticles on stainless steel foils, which can be shaped to any kind of architecture and, if necessary, heated electrically. Solutions of pre-prepared, ligand protected and monodispersed gold, palladium, platinum and rhodium nanoparticles were sprayed onto stainless steel foils, followed by the careful removal of the ligand molecules by an oxygen plasma treatment. Due to this, bare particles become irreversibly fixed on the steel support. It could be shown that the original particle sizes do not change during the plasma treatment. Foils, densely coated with the nanoparticles, were used for gas phase catalyses in a self-made reactor at room temperature or at 60 °C. Hydrogenation of 1,3-butadiene at 15 nm Pd and 2 nm Pt, CO oxidation at 16 nm, 8 nm and 1.4 nm gold and NO reduction with NH₃ at 2 nm Rh particles were performed, indicating that the novel catalysts might in principle be applicable in technical processes if the experimental conditions like form and temperature would be optimized. Dedicated to Professor Dieter Fenske on the occassion of his 65th birthday.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.