稀土改性对SO42-/ZrO2固体酸催化剂结构与催化性能的影响

采用共沉淀法和浸渍法在不同条件下制备了稀土-SO₄^2-/ZrO₂系列固体酸催化剂。使用废油脂与甲醇的酯交换反应评价了催化剂活性,并通过X射线衍射、红外光谱、比表面积测定表征方法考察了催化剂结构和性能的关系。结果表明,La摩尔掺杂量4%、焙烧温度600℃时制得的SO₄^2-/ZrO₂-La₂O₃催化剂活性最高,此时脂肪酸甲酯的产率为64.68%,且具有较好的重复使用性。稀土的引入使活性四方相ZrO₂更加稳定,600℃焙烧使催化剂既具有较多活性四方相ZrO₂,又具有较大比表面积,从而提高了催化剂活性。催化剂中形成了固体超强酸结构,且改性后酸强度增大,催化剂活性中心数目增加。     

含铜类水滑石催化材料热分解过程的研究

共沉淀法合成了Cu0.13Mg0 6Al0.27(OH)2(CO3)0.135·xH2O类水滑石物质 (CuHTlc) ,采用XRD、DTA TG、BET、TEM和27AlMASNMR技术对其热分解过程进行了表征。结果表明 ,在较低焙烧温度时 (低于300℃ ),氢氧根和层间水部分脱除 ,但水滑石仍保持其层状结构 ;500℃时 ,其层状结构被完全破坏 ,出现氧化镁晶相结构 ,随着焙烧温度的进一步升高 ,尖晶石晶相生成。500℃时的焙烧产物具有最大比表面 (193m2·g-1)。当温度高于500℃ ,焙烧产物组成可表示为Cu0.13Mg0.6Al0.27O0.135,CuHTlc的热分解过程可表示为 :Cu0.13Mg0.6Al0.27(OH)2(CO3)0.135·xH2O→Cu0.13Mg0.6Al0.27O0.135 (1 x)H2O 0.135CO2。     

Application of thermoanalytical methods to the study of limestone sulphation

The role that can be played in the elucidation of the limestone sulphation mechanism by thermal analysis methods with some specific procedures is discussed. Contrasting examples of applications of thermoanalytical techniques using the variable conditions are provided. These examples deal with the programmed thermal analysis using different gas sequences, the influence the calcination and sulphation conditions on the capture of SO₂, the effect of catalysts on limestone sulphation and the thermal stability of CaSO₃. Two proposed mechanisms were supported by the phase identification of the solid products.     

LED照射光催化剂用于苯、甲苯、乙苯和二甲苯分解(英文)

Studies on the use of gas phase applications of light emitting diodes(LEDs) in photocatalysis are scarce although their photocatalytic decomposition kinetics of environmental pollutants are likely different from those in aqueous solutions.The present study evaluated the use of chips of visible light LEDs to irradiate nitrogen doped titania(N-TiO2) prepared by hydrolysis to decompose gaseous benzene,toluene,ethyl benzene,m-xylene,p-xylene,and o-xylene.Photocatalysts calcined at different temperatures were characterized by various analytical instruments.The degradation efficiency of benzene was close to zero for all conditions.For the other compounds,a conventional 8 W daylight lamp/N-TiO2 unit gave a higher photocatalytic degradation efficiency as compared with that of visible-LED/N-TiO2 units.However,the ratios of degradation efficiency to electric power consumption were higher for the photocatalytic units that used two types of visible-LED lamps(blue and white LEDs).The highest degradation efficiency was observed with the use of a calcination temperature of 350 oC.The average degradation efficiencies for toluene,ethyl benzene,m-xylene,p-xylene,and o-xylene were 35%,68%,94%,and 93%,respectively.The use of blue-and white-LEDs,high light intensity,and low initial concentrations gave high photocatalytic activities for the photocatalytic units using visible-LEDs.The morphological and optical properties of the photocatalysts were correlated to explain the dependence of photocatalytic activity on calcination temperature.The results suggest that visible-LEDs are energy efficient light source for photocatalytic gas phase applications,but the activity depends on the operational conditions.     

Nanosized nickel oxide particles and modification with poly(methyl methacrylate)

In recent years, there is an increasing interest in the fabrication of inorganic–organic materials considering the remarkable change and improvement in properties. In this investigation, nanosized nickel oxide (NiO) particles were first prepared by calcination of nickel hydroxide precursor obtained by a simple liquid‐phase process. Mixed phases of NiO and nickel hydroxide were present as the calcination temperature was lower than 250°C. Non‐stoichiometric NiO was formed between 250°C and 350°C, and a pure NiO was obtained as the temperature reached 500°C. The surface characteristics of NiO particles were evaluated by measuring the adsorption behavior of anionic and cationic surfactants and some biomolecules. NiO/poly(methyl methacrylate) composite particles were then prepared using variable NiO/methyl methacrylate (MMA) ratio by seeded emulsion polymerization. The efficiency of NiO incorporation in the composite increased as the MMA content was increased in the recipe. The composite particles were colloidally stable, and the obtained particles were characterized by Fourier transform infrared, scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectra. Copyright © 2011 John Wiley & Sons, Ltd.     

Remarkable Enhancement in the Dispersion and Low-Temperature Activity of Catalysts Prepared via Novel Plasma Reduction-Calcination Method

A novel plasma reduction and calcination (PR&C) method has been recently developed. Upon the experimental investigations on methane conversions, including partial oxidation, methane combustion, NO reduction by methane and CO₂ reforming, the catalysts prepared by this PR&C method exhibit a remarkable enhancement in the dispersion, low-temperature activity and stability. A plasma-enhanced acidity has also been addressed, which would play an important role in the improved dispersion. The PR&C method is leading to a better preparation of supported catalysts, esp., those for methane conversion.     

Characterization of Thermally Stable Brønsted Acid Sites on Alumina‐Supported Niobium Oxide after Calcination at High Temperatures

Thermally stable Brønsted acid sites were generated on alumina‐supported niobium oxide (Nb₂O₅/Al₂O₃) by calcination at high temperatures, such as 1123 K. The results of structural characterization by using Fourier‐transform infrared (FTIR) spectroscopy, TEM, scanning transmission electron microscopy (STEM), and energy‐dispersive X‐ray (EDX) analysis indicated that the Nb₂O₅ monolayer domains were highly dispersed over alumina at low Nb₂O₅ loadings, such as 5 wt %, and no Brønsted acid sites were presents. The coverage of Nb₂O₅ monolayer domains over Al₂O₃ increased with increasing Nb₂O₅ loading and almost‐full coverage was obtained at a loading of 16 wt %. A sharp increase in the number of hydroxy groups, which acted as Brønsted acid sites, was observed at this loading level. The relationship between the acidic properties and the structure of the material suggested that the bridging hydroxy groups (Nb? O(H)? Nb), which were formed at the boundaries between the domains of the Nb₂O₅ monolayer, acted as thermally stable Brønsted acid sites.     

Nd掺杂V2O5/TiO2低温NH3选择性催化还原NOx性能研究

采用溶胶凝胶法和浸渍法制备了Nd掺杂V₂O₅/TiO₂催化剂.用XRD和Raman技术对其晶相结构和分散性进行了表征,并在固定床反应器上评价了其催化活性.然后考察了煅烧温度对催化剂脱硝性能的影响,结合XRD表征结果可知煅烧温度没有改变TiO₂的晶型,只影响了其结晶度.同时氮气吸脱附表征及BET计算结果显示350℃煅烧时催化剂比表面积最大.研究了O₂浓度以及氨氮比对催化剂脱硝性能的影响.同时考察了Nd掺杂催化剂的稳定性,发现Nd改性催化剂有较好的稳定性.并对Nd掺杂催化剂做了抗硫抗水考察,研究结果表明,Nd掺杂催化剂有较好的耐硫耐水性.     

Enhanced photodegradation of methylene blue with alkaline and transition‐metal ferrite nanophotocatalysts under direct sun light irradiation

It is highly desired to synthesize low‐cost photocatalysts for the degradation of colored dyes to safeguard our environment for the future generations. Here, we report an extremely efficient and low‐cost synthesis of alkaline earth and transition‐metal ferrite photocatalysts (MgFe₂O₄, CaFe₂O₄, BaFe₁₂O₁₉, CuFe₂O₄, and ZnFe₂O₄) from their chloride salts and their applications for the degradation of methylene blue (MB) dye under UV–visible and direct sunlight irradiation. The as‐prepared photocatalysts displayed enhanced photoactivities under both conditions of irradiation. After calcination at 600°C, the photocatalytic degradation increased significantly, and 96 and 85% MB was removed with ZnFe₂O₄ under UV–visible and direct sunlight irradiation, respectively. Moreover, large amounts of hydroxyl free radicals were produced under both irradiation conditions, which participated in the degradation of MB. The enhanced photodegradation activities of these photocatalysts are attributed to their extended visible light absorption and low bandgaps. This work will provide a feasible route to the synthesis of efficient and low‐cost photocatalysts to utilize sunlight for environmental remediation.     

载体焙烧温度对Ru/MgAl2O4催化剂液相苯部分加氢性能的影响

采用水热合成法制备了镁铝尖晶石(MgAl2O4)材料,制备了其负载的Ru催化剂,研究了MgAl2O4焙烧温度对Ru/MgAl2O4催化剂上液相苯部分加氢催化性能的影响.采用X射线粉末衍射、27A1固体核磁共振、傅里叶变换红外光谱、H2-程序升温还原、H2-程序升温脱附、N2物理吸附、透射电子显微镜和X射线光电子能谱等手...