Polymerization of vinyl compounds in the presence of perfluoroisopropenyl ester

To report a new polymerization reaction phenomenon, this article examines the polymerization of butyl vinyl ether and N‐vinylcarbazole in the presence of 2‐benzoxypentafluoropropene [CF₂?C(CF₃)OCOC₆H₅ or BPFP]. The homopolymer of butyl vinyl ether was produced in the presence of a catalytic amount of BPFP in high yields. N‐Vinylcarbazole, which is a monomer well‐known for producing its homopolymer under cationic polymerization conditions, also yielded its homopolymer in the presence of BPFP. It was concluded that some cationic species would be yielded by the addition of BPFP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 908–910, 2007.     

Liquid–Liquid Transition and Detrapping of Trapped Carriers of P(MMA/BA) Copolymers by Thermally Stimulated Depolarization Current

Poly (methyl methacrylate/butyl acrylate) [P(MMA/BA)] copolymers (M _η～2×10⁵) with different mass percentages of PMMA (100/0, 90/10, 81/19, and 75/25), were synthesized by the method of solution polymerization. In addition to the normal α and ρ peak, a third τ peak is observed in thermally stimulated depolarization current (TSDC) spectra of the copolymers in the high temperature region. The α peak‐corresponds to the glass transition, the ρ peak originates from the detrapping of trapped carriers in the bulk amorphous structure related with flexible side groups, and the τ peak can be attributed to the charge detrapping related to the liquid–liquid transition of the copolymers. The three peaks all move to lower temperature with an increase of the BA component, indicating that the flexible side groups of butyl acrylate not only have an effect of plasticization on the glass transition and liquid–liquid transition, but also make the trap depth shallower and the detrapping process easier for the ρ and τ peaks. The experimental results confirm that TSDC analysis is very sensitive for investigating the liquid–liquid transition of polymers. The liquid–liquid transition temperature (T _LL) of the copolymers follows a type of the Fox equation. Fitting the results gives a T _LL of 102°C for polybutyl acrylate.     

Preparation and Flammability of a Flame-Retardant Poly(Butyl Acrylate-Vinyl Acetate) System Based on Gemin-Surfactant Modified Montmorillonite and Ammonium Polyphosphate

Gemin-surfactant modified montmorillonite (G-MMT) was successfully prepared by an ion exchange reaction and characterized via Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The P(BA-VAc)/G-MMT emulsion was prepared via an in-situ polymerization method using potassium persulfate (K₂S₂O₈, KPS) as an initiator. Ammonium polyphosphate (APP) was introduced for obtaining P(BA-VAc)/APP/G-MMT flame-retardant latex with a constant total content of 15 wt% of APP and G-MMT in P(BA-VAc). The flame retardancy and thermal behavior of the latex films were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and thermal gravimetric analysis (TG/DTA). Compared with the P(BA-VAc)/APP composite, the LOI value of P(BA-VAc)/APP/G-MMT containing 0.5 wt% G-MMT at the same total additive loading increased to 29.1 from 20.0 and its UL-94 increased from no rating to V-0. Thermal gravimetric (TG) data showed that the amount of residues increased significantly with the loading of G-MMT. In addition, the LOI values increased with the increase in char residues. The morphology and microstructure of the residues generated during LOI testing were investigated by scanning electron microscopy (SEM). The outer surfaces of P(BA-VAc)/APP/G-MMT charred layers were more continuous and compact than those of P(BA-VAc)/APP.     

Lithium solvation in a PMMA membrane plasticized by a lithium‐conducting ionic liquid based on 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide

The Raman and Infrared (IR) spectra of poly(methyl methacrylate) (PMMA) membranes plasticized by ionic liquids of the (1 − x)[1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI)],xLiTFSI type, where BMI⁺ is the 1‐butyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, are analyzed for a lithium bis(trifluoromethane sulfone)imide (LiTFSI) mole fraction x = 0.23 and PMMA contents from 0 to 50 wt%. The lithium is found to have an average coordination of about three CO groups and less than one TFSI⁻ anion. It plays the role of a cross‐linker between the ester groups of PMMA and the nonvolatile ionic liquid. Addition of PMMA to the (1 − x)(BMITFSI),xLiTFSI ionic liquid lowers the conductivity but might improve the lithium transference number by transforming the [Li(TFSI)₂]⁻ anionic clusters present in the pure ionic liquid into a mixed coordination by ester groups and TFSI⁻ anions. Copyright © 2008 John Wiley & Sons, Ltd.     

Simultaneous measurement of methyl tert‐butyl ether and tert‐butyl alcohol in human serum by headspace solid‐phase microextraction gas chromatography–mass spectrometry

The abundant production of methyl tert‐butyl ether (MTBE) and its widespread use have led to an increase in the potential for human exposure. This work described a simple, fast, sensitive, reliable and low‐cost method for the simultaneous measurement of MTBE and its metabolite, tert‐butyl alcohol (TBA) in human serum by headspace solid‐phase microextraction gas chromatography–mass spectrometry. Extraction conditions were optimized and 40 °C, 10 min, 250 rpm and 0.3 g NaCl for a 1 mL sample were the optimal conditions. This method showed good analytical performance in terms of sensitivity with limits of detection in serum (1 mL) of 0.03 µg/L for MTBE and 0.05 µg/L for TBA, accuracy (mean recovery values) from 75.8% to 85.8%, precision (relative standard deviations) <10% and sample stability (biodegradation) <10% after 28 days. A verification experiment proved the reproducibility and stability of this method as well. Finally the method was used to detect 212 specimens, and the internal dose levels for MTBE in human serum were presented in China. Copyright © 2015 John Wiley & Sons, Ltd.     

Selective oxidation of benzylic,allylic and propargylic alcohols using dirhodium(II) tetraamidinate as catalyst and aqueous tert‐butyl hydroperoxide as oxidant

We show that the dirhodium(II) tetraamidinate complex Rh₂(Msip)₄ efficiently catalyzes the oxidation of activated secondary alcohols at only 0.1 mol% loading. In this approach, we oxidized various benzylic, allylic and propargylic alcohols to the corresponding carbonyl compounds under mild aqueous conditions using the inexpensive oxidant T‐HYDRO® (70 wt% aqueous tert‐butyl hydroperoxide). Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of Catalytic Chain Transfer Copolymerization of Methacrylates

Batch experiments were carried out to investigate the kinetics of catalytic chain transfer copolymerization of methyl methacrylate and n‐butyl methacrylate. The Predici® model developed to represent the system describes the numerous experimental data measured at high concentrations of Co(II ) catalyst, taking into account the chain‐length dependencies of termination, propagation and catalytic chain transfer. The constants for catalytic chain transfer are determined as 2.3 × 10⁴ for both methyl methacrylate and n‐butyl methacrylate from fitting the experimental data. Two inhibition mechanisms are shown to describe the decrease of the polymerization rate in the presence of catalyst equally well, with an unknown impurity dissolved in initiator introduced to explain experimental profiles measured at high initiator concentrations.

     

Insights into the Reinforcement of Butyl Rubber by Carbon Black and Silica with the Aid of Their Dynamic Properties

Carbon black (N234) and silica (Vulksail N) with a silane coupling agent Si-69 were chosen as reinforcing fillers in butyl rubber (IIR). The rheological behavior of the IIR compounds and the dynamic mechanical properties of IIR vulcanizates were investigated with a rubber processing analyzer and dynamic mechanical analysis (DMA) to examine the filler dispersion in the rubber matrix and the interaction between filler and matrix. The data indicated that the N234 filled IIR compounds had more filler networks than those filled with silica. Filler networks first appeared at 30 phr N234 and 45 phr silica with silane coupling agent Si-69. The interaction between N234 and IIR was far stronger than that between silica and IIR. However, the silica Vulksail N filled IIR had better wet-grip and lower rolling resistance compared to the carbon black-filled IIR should IIR be chosen as a substitute of styrene-butadiene rubber (SBR) in tire tread. The reinforcing factor, R, R (related to the difference in tan d peak height at T_g for the filled and nonfilled rubbers), also demonstrated that the N234-IIR interaction was stronger than for the silica. IIR with 30 phr N234 exhibited the largest tensile strength, 20.1 MPa, for those vulcanizates examined. The tensile and tear strengths of N234 filled IIR were higher than those of IIR with similar amounts of silica. Thus, it was concluded that N234 is a more active reinforcing filler in IIR than silica (Vulksail N) even with a silane coupling agent (Si-69).