1,3‐Dichloro‐tetra‐n‐butyl‐distannoxane: a new application for catalyzing the direct substitution of 9H‐xanthen‐9‐ol at room temperature

1,3‐Dichloro‐tetra‐n‐butyl‐distannoxane was firstly used to catalyze the direct substitution of 9H‐xanthen‐9‐ol with indoles at room temperature to afford a class of 3‐(9H‐xanthen‐9‐yl)‐1H‐indole derivatives in good to excellent isolating yield. Moreover, other nucleophiles (such as diketone and pyrrole) could also proceed smoothly in this methodology. Copyright © 2012 John Wiley & Sons, Ltd.     

Novel test method to estimate bound rubber formation of silica-filled solution styrene-butadiene rubber compounds

Bound rubber formation was investigated in detail by applying various extraction temperatures (at room temperature, 90°C, and 180°C) and novel treatment methods (ammonia bubbling and sonication). Bound rubbers could be divided into three major components of core shell, primary layer including tightly primary layer and occluded rubber, and secondary layer including connecting filament. Bound rubber content of the core shell was measured by four successive procedures of extraction at room temperature, ammonia bubbling, extraction at 180°C and sonication. Bound rubber content of the tightly primary layer was measured by three successive procedures of extraction at 90°C, ammonia bubbling and sonication. Bound rubber content of the primary layer was measured by two successive procedures of extraction at 90°C and sonication.     

Synthesis by Emulsion Polymerization of Poly(butyl acrylate-co-silver acrylate) Ionomers and Evaluation of their Possible Applications

The synthesis by emulsion polymerization and the characterization by a battery of techniques of poly(butyl acrylate-co-silver acrylate) [poly(BuAc-co-AgAc)] ionomers are reported here. Reaction rates were fast and conversions around 90% were obtained in less than one hour, regardless of the initial ratio of butyl acrylate and silver acrylate employed (BuAc/AgAc = 90/10, 80/20, 70/30). Particle size was in the range of 176 to 200 nm, depending on the BuAc/AgAc ratio. Ionomers’ formation was corroborated by infrared spectroscopy and inferred by differential scanning calorimetry (DSC). DSC disclosed that the poly(BuAc-co-AgAc) has two glass transition temperatures: one at ca. ?49°C due to relaxation of the ionomer backbone domains rich in BuAc and another ca. 35°C due to the relaxation of the backbone domains where the AgAc-units content was higher. Young moduli increased as the copolymers became richer in AgAc. Antibacterial tests against Escherichia coli with the 90/10 (BuAc/AgAc) ionomer revealed that the bacteria population diminishes from 5 log CFU/mL to less than 0.3 MPN/mL after one hour of contact with the ionomers. Also, we demonstrated that the ionomers are excellent compatibilizers for making semiconductive films of n-dodecylbenzene sulfonic acid-doped polyaniline (PANIDBSA)-poly(BuAc-co-AgAc) and poly(n-butyl methacrylate) (PBMA) blends. The electrical conductivity of the blend films, which were homogeneous, rose as the AgAc content in the films increased.     

硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

Rapid identification of trimethyl and triethyl amines using sulphonic acidic ionic liquids: A time-of-flight secondary ion mass spectrometry study of fragmentation reactions

The time-of-flight secondary ion mass spectrometry (TOF-SIMS) has emerged as a powerful tool for the unswerving detection of biomolecules, in particular, proteins and peptides. To date, there is very little information available on the direct determination of trimethyl/triethyl amines using TOF-SIMS. One major hurdle in this regard is an ultrahigh vacuum system, usually needed in TOF-SIMS, which hampers its usability to trimethyl/triethyl amines owing to their high evaporation rate. We designed an efficient and sensitive protocol for rapid identification and sensitive determination of tertiaryalkyl amines using TOF-SIMS. The amines were derivatized by reaction with 1,4-butane sultone and sulphuric acid sequentially to afford the corresponding sulphonic acidic ionic liquids (ILs). The TOF-SIMS analysis of these task-specific ILs (TSILs) was carried out in both positive and negative polarity. The positive ion mass spectra of TSILs showed sharp fragmented peaks for tertiaryalkyl amines at typical level and up to 10 ppm. The possible mechanism for different fragmentation pathways in positive polarity was discussed.     

Synthesis and application of cinnamate-functionalized rubber for the preparation of UV-curable films

A butyl rubber derivative that can be cured upon exposure to UV light in the absence of additional chemical additives was developed. This polymer was prepared by the reaction of hydroxyl-functionalized butyl rubber with cinnamoyl chloride to provide a cinnamate functionalized rubber. The cinnamate content was varied by starting with derivatives prepared from butyl rubber containing either 2 or 7 mol% isoprene. The kinetics of the cross-linking was studied by UV–visible spectroscopy and it was found to vary according to the film thickness. The changes in gel content and volume swelling ratio with irradiation time were dependent on the cinnamate content. Toxicity studies suggested that the cross-linked materials do not leach toxic molecules. The approach was also applied to obtain cross-linked films of butyl rubber-poly(ethylene oxide) graft copolymers, leading to surfaces that resisted the adhesion and growth of cells. Thus the approach is versatile and is of particular interest when non-leaching coatings of cross-linked butyl rubber are desired for biomedical or other applications.     

Surface treatment of CaCO3 with a mixture of amino- and mercapto-functional silane coupling agents and tensile properties of the rubber composites

In order to reinforce the composite consisting of isoprene rubber (IR) and calcium carbonate (CaCO₃) particles, the surface treatment of CaCO₃ particles with a mixture of amino- and mercapto-functional silane coupling agents was investigated. The quantity of chemisorbed silanes in treated CaCO₃ measured using thermogravimetry was greater for amino- than for mercapto-silane and for the tri- than for the dialkoxy structure. Second, the molecular mobility of polycondensate of the mixtures with the trialkoxy structure measured using ¹H pulse nuclear magnetic resonance had the least molecular mobility, i.e., formed the highest density network. The greater values of stress at 500% strain, fracture stress, and elongation at break were determined for the treatment with amino- and mercapto-functional silanes having a trialkoxy structure from the stress-strain curves of composite. The mixture treatment with dialkoxy structure and with amino- or mercapto-functional silane only did not improve the mechanical properties sufficiently. Interactions between the amino group and the CaCO₃ surface, covalent bonding between the mercapto group and the IR, and high density network formation of trialkoxy silane were important for improving the mechanical properties of the composite.     

Nitrile Rubber Reactor Operation Troubleshooting with Principal Component Analysis

Principal Component Analysis (PCA) is employed as a tool in order to demonstrate yet another application of the technique, and, most importantly, to show that results from the statistical multivariate technique do make physico-chemical sense. The operation of a typical emulsion copolymerization of acrylonitrile and butadiene (nitrile butadiene rubber, NBR) is used as an example of process troubleshooting. In more general terms, a statistical tool is used to aid process data analysis and process operation (recipe, product property) troubleshooting.

The goal is to produce consistent Mooney Viscosity (MV) among different batches. The observation is that varying induction times lead to Mooney Viscosity inconsistencies. Firstly, we show results from the application of PCA to process data. Secondly, we deal with an even more important (and often ignored) question by examining whether the trends indicated by PCA make process sense.     

Radiation Processed Styrene-Butadiene Rubber/Ethylene-Propylene Diene Rubber/Multiple-Walled Carbon Nanotubes Nanocomposites: Effect of MWNT Addition on Solvent Permeability Behavior

Different compositions of SBR/EPDM 50:50 blends containing multiple-walled carbon nanotubes (MWNT) as nanoparticulate fillers (0.5%–10%) were evaluated for radiation sensitivity and solvent permeability. The efficiency of radiation ***cross-linking was analyzed by gel-content and Charlesby–Pinner parameter measurements. ***Gamma-radiation-induced cross-linking extent was found to increase with radiation dose and MWNT concentration, which was reflected in different extents of swelling. Rigorous analysis of swelling and diffusion data, on the basis of the transport exponent (n) values and diffusion/relaxation rate indicated anomalous diffusion behavior for most of the nanocomposites. The swelling extent in different solvents was found to be a function of polymer-solvent interaction as well as stearic hindrance due to the structure/size of the solvent molecules. Polymer-filler interaction investigated by a Kraus plot indicated high reinforcement of the SBR/EPDM matrix on MWNT addition. There was no significant change in surface energy or hydrophilicity of the SBR/EPDM matrix on introduction of MWNT into it.