The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

Surface modified precipitated calcium carbonates at a high degree of dispersion

Calcium carbonates of different degrees of surface hydrophobicity were obtained when sorbic acid or polyoxyethylene glycol were present during the precipitation. In the presence of trace amounts of divalent cations carbonates with high surface hydrophilicity and improved monodisperse character are obtained. Surface modification of the calcium carbonates by several proadhesive compounds can markedly improve the chemical affinity of the carbonates to polymers. Very effective are isostearoyl titanate and two polyoxyethylene compounds. Precipitated calcium carbonates modified with 2 to 3 percent (wt/wt) of isostearoyl titanate increased the tensile strenght of butadiene-styrene rubber by approximately 100%. Polyurethane is only strengthened when 30 wt/wt of a filler are introduced independently of the type proadhesive compounds. The best strength and hysteresis of polyurethanes are obtained with calcium carbonate modified with 2 percent (wt/wt) of polyoxyethylene glycol.     

交联助剂对PPC／NBR弹性体结构和性能的影响

研究了马来酸酐（ＭＡ）及异氰脲酸三烯丙酯（ＴＡＩＣ）对聚丙撑碳酸酯／丁腈橡胶共混弹性体结构和性能的影响，发出加入ＭＡ或ＴＡＩＣ能有效地改善交联网络；加入适量ＭＡ能显著改善共混弹性体热氧老化稳定性；加入ＴＡＩＣ使共混弹性体具有优良的高弹特性和力学性能。     

高分子气体分离膜材料的化学结构与气体透过性能之间的关系

本文以硅橡胶和聚酰亚胺为基础,从高分子的化学组成、分子链段的运动能力、侧基的大小及其作用等几个方面,讨论了聚合物的化学结构对其均质膜的气体选择透过性能的影响,以溶解扩散过程对气体分离膜材料的透气行为进行了剖析,井简述高分子化学结构对其成膜时结晶情况的影响及对气体透过的作用;还概述了气体分离膜科学发展的历史以及基本原理.     

HY沸石上2,6-二叔丁基萘的择形合成

 研究了脱铝HY沸石（n（Si）／n（Al）＝3．8）上萘（naph）的\r\n选择性叔丁基化反应．结果表明，八面沸石对该反应过程有较好的择形\r\n催化作用，两种异构化产物（2，6－二叔丁基萘和2，7－二叔丁基萘）\r\n之间存在着热力学平衡，即两种异构化产物可在酸性中心位上相互转化\r\n．在以叔丁醇为烷基化试剂，WHSV＝2h－1，n（t－BuOH）／n（naph）\r\n＝3，反应温度为120℃的反应条件下，萘的转化率可达98．43％，β－\r\n位选择性可高达100％，二叔丁基萘收率可达74．34％，2，6－二叔丁\r\n基萘／2，7－二叔丁基萘质量比为6．24．     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

线性低密度聚乙烯在与丁苯橡胶的共混体系中的结晶行为

本工作采用DSC、X-射线衍射、小角激光光散射、偏光显微镜等手段,研究了线性低密度聚乙烯/丁苯橡胶共混体系中聚乙烯的结晶结构、平衡熔点和结晶动力学。     

Prevulcanisation of skim latex: morphology and its use in natural rubber based composite material

The prevulcanisation of skim latex, a by-product of field natural rubber (NR) latex concentrated by centrifugation, using sulphur and peroxide systems was investigated. Compared to the peroxide prevulcanisation, the lower swelling ratio of film casted from sulphur-prevulcanised skim (SPVS) latex was observed. The latter was then employed for preparation of NR/SPVS core–shell particles by using heterocoagulation technique whose driving force was an interpolymer complex between poly(ethylene oxide) (PEO) moieties of a non-ionic surfactant (Nonidet) adsorbed on small SPVS particles and the indigenous surfactant (protein–lipid) on a large NR particle. The value of zeta potential of heterocoagulated particle and the better oil resistance of films casted from the composite latex when compared to that of the NR film revealed the NR/SPVS core–shell structure.     

SBS单组分橡胶防水涂料

探讨了SBS单组分橡胶防水涂料的组成、制备方法及其对性能的影响因素,详细地介绍了该涂料在防水工程应用上的两大独特优势:(1)优异的抗基层形变能力。这一优势,使其具备了屋面防水专用材料和特效材料的条件,解决了以往防水材料一直不能解决的“零点开裂”问题。(2)创造出多种复合防水工法,既克服和解决了卷材与涂料的各自缺点,又发挥了各自的优点,使这种复合防水层成为最有效的防水层。     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.