聚酰亚胺中空纤维膜用于甲醇/甲基叔丁基醚的分离

甲醇／甲基叔丁基醚混合物的膜法分离，大多采用渗透汽化方法，少有采用蒸汽渗透法。用聚酰亚胺中空纤维膜，对以蒸汽渗透和渗透汽化两种方式分离甲醇／甲基叔丁基醚混合物（甲醇质量分数为0．01－0．30）的效果进行了对比。结果显示，在甲醇质量分数低于0．05时，蒸汽渗透较渗透汽化法的分离性能优越。     

A new route for the functionalisation of wood through transesterification reactions

A novel transesterification reaction between acetylated maritime pine sapwood (Pinus pinaster Soland) and methyl benzoate (MB), in the presence of dibutyltin oxide (DBTO) as a catalyst, was performed. Reaction was confirmed by Fourier-transform infrared spectroscopy (FTIR) and ¹³C nuclear magnetic resonance cross-polarisation with magic-angle spinning (NMR CP MAS) analysis: signals corresponding to benzoylated wood were identified and, when transesterification was performed with ethyl trimethylsilylacetate (ETMSA), characteristic trimethylsilyl groups were detected. The acetyl/benzoyl exchange rate was found to increase with increasing amount of DBTO, temperature and reaction time and a concurrent deterioration of the woody material was evidenced.     

Controlled release of acetochlor from poly (butyl methacrylate-diacetone acrylamide) based formulation prepared by nanoemulsion polymerisation method and evaluation of the efficacy

Acetochlor is an important herbicide for gramineous weeds and some small seed broadleaf weeds. Controlled-release formulations of herbicide are highly desirable not only for attaining the most effective utilisation of the weed control, but also for reducing environmental pollution. Acetochlor was incorporated in poly (butyl methacrylate-diacetone acrylamide) based formulation to obtain controlled release properties. The acetochlor nanocapsules were characterised by size distribution, infrared spectroscopy (IR) and field emission scanning electron microscopy (FESEM), and factors related to loading efficiency, swelling behaviour of the formulation were investigated. For this controlled-release formulation, the loading efficiency could reach about 50% (w/w). n, the diffusion parameter was indicative of the transport mechanism, and the values for ‘n’ were in the range of 0.28–0.61, which indicated that the release of acetochlor was diffusion-controlled. The time taken for 50% of the active ingredient to be released into water, t₅₀, was also calculated for the comparison of formulations in different conditions. The formulation with higher temperature and more diacetone acrylamide had lower value of t₅₀, which means a quicker release of the active ingredient. This study highlighted some pieces of evidence that improved herbicide incorporation and slower release were linked to potential interactions between the herbicide and the polymer.     

Synthesis,characterization and catalytic activity of peripherally tetra‐substituted Co(II) phthalocyanines for cyclohexene oxidation

New 3,3‐diphenylpropoxyphthalonitrile (5) was obtained from 3,3‐diphenylpropanol (3) and 4‐nitrophthalonitrile (4) with K₂CO₃ in DMF at 50 °C. The novel cobalt(II) phthalocyanine complexes, tetrakis‐[2‐(1,4‐dioxa‐8‐azaspiro[4.5]dec‐8‐yl)ethoxy] phthalocyaninato cobalt(II) (2) and tetrakis‐(3,3‐diphenylpropoxy)phthalocyaninato cobalt(II) (6) were prepared by the reaction of the phthalonitrile derivatives 1 and 5 with CoCl₂ by microwave irradiation in 2‐(dimethylamino)ethanol for at 175 °C, 350 W for 7 and 10 min, respectively. These new cobalt(II)phthalocyanine complexes were characterized by spectroscopic methods (IR, UV–visible and mass spectroscopy) as well as elemental analysis. Complexes 2 and 6 are employed as catalyst for the oxidation of cyclohexene using tert‐butyl hydroperoxide (TBHP), m‐chloroperoxybenzoic acid (m‐CPBA), aerobic oxygen and hydrogen peroxide (H₂O₂) as oxidant. It is observed that both complexes can selectively oxidize cyclohexene to give 2‐cyclohexene‐1‐ol as major product, and 2‐cyclohexen‐1‐one and cyclohexene oxide as minor products. TBHP was found to be the best oxidant since minimal destruction of the catalyst, higher selectivity and conversion were observed in the products. Copyright © 2012 John Wiley & Sons, Ltd.     

1,3‐Dichloro‐tetra‐n‐butyl‐distannoxane: a new application for catalyzing the direct substitution of 9H‐xanthen‐9‐ol at room temperature

1,3‐Dichloro‐tetra‐n‐butyl‐distannoxane was firstly used to catalyze the direct substitution of 9H‐xanthen‐9‐ol with indoles at room temperature to afford a class of 3‐(9H‐xanthen‐9‐yl)‐1H‐indole derivatives in good to excellent isolating yield. Moreover, other nucleophiles (such as diketone and pyrrole) could also proceed smoothly in this methodology. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis by Emulsion Polymerization of Poly(butyl acrylate-co-silver acrylate) Ionomers and Evaluation of their Possible Applications

The synthesis by emulsion polymerization and the characterization by a battery of techniques of poly(butyl acrylate-co-silver acrylate) [poly(BuAc-co-AgAc)] ionomers are reported here. Reaction rates were fast and conversions around 90% were obtained in less than one hour, regardless of the initial ratio of butyl acrylate and silver acrylate employed (BuAc/AgAc = 90/10, 80/20, 70/30). Particle size was in the range of 176 to 200 nm, depending on the BuAc/AgAc ratio. Ionomers’ formation was corroborated by infrared spectroscopy and inferred by differential scanning calorimetry (DSC). DSC disclosed that the poly(BuAc-co-AgAc) has two glass transition temperatures: one at ca. ?49°C due to relaxation of the ionomer backbone domains rich in BuAc and another ca. 35°C due to the relaxation of the backbone domains where the AgAc-units content was higher. Young moduli increased as the copolymers became richer in AgAc. Antibacterial tests against Escherichia coli with the 90/10 (BuAc/AgAc) ionomer revealed that the bacteria population diminishes from 5 log CFU/mL to less than 0.3 MPN/mL after one hour of contact with the ionomers. Also, we demonstrated that the ionomers are excellent compatibilizers for making semiconductive films of n-dodecylbenzene sulfonic acid-doped polyaniline (PANIDBSA)-poly(BuAc-co-AgAc) and poly(n-butyl methacrylate) (PBMA) blends. The electrical conductivity of the blend films, which were homogeneous, rose as the AgAc content in the films increased.     

Stabilization of zeylenone in rat plasma by the presence of esterase inhibitors and its LC‐MS/MS assay for pharmacokinetic study

Six esterase inhibitors, namely EDTA·2Na⁺, NaF, phenylmethanesulfonyl fluoride, dichlorvos, bis‐nitrophenyl phosphate (BNPP) and thenoyltrifluoroacetone, and the mixture of NaF and BNPP, were evaluated for the stabilization of labile benzoate containing zeylenone in rat plasma. The mixture appeared to exhibit the most effectively stabilizing effect with the degraded content of zeylenone decreasing from >60% (in the absence of inhibitors) to <6%. Following the stabilization by the addition of NaF (5 mm ) and BNPP (5 mm ), the analytes in rat plasma were acidified by formic acid and extracted into ethyl acetate at 0°C. After chromatographic separation, the detection of zeylenone was performed on a 3200 Q‐Trap with positive ion electrospray mode, monitoring the ion transition m/z 383.2 → 105.0. The method was validated over the range from 2.68 to 1340 ng/mL with inter‐ and intra‐run precision for the quality control samples being less than 6.8%. The assay accuracy was within 100 ± 7.0%. The validated method was successfully applied to a pharmacokinetic study in rats after the intratracheal administration of zeylenone in free drug or polymeric micellar solutions. The results showed that the pulmonary absorption of zeylenone loaded in micelles was significantly retarded compared with that of free drug solutions. Copyright © 2012 John Wiley & Sons, Ltd.     

Rapid identification of trimethyl and triethyl amines using sulphonic acidic ionic liquids: A time-of-flight secondary ion mass spectrometry study of fragmentation reactions

The time-of-flight secondary ion mass spectrometry (TOF-SIMS) has emerged as a powerful tool for the unswerving detection of biomolecules, in particular, proteins and peptides. To date, there is very little information available on the direct determination of trimethyl/triethyl amines using TOF-SIMS. One major hurdle in this regard is an ultrahigh vacuum system, usually needed in TOF-SIMS, which hampers its usability to trimethyl/triethyl amines owing to their high evaporation rate. We designed an efficient and sensitive protocol for rapid identification and sensitive determination of tertiaryalkyl amines using TOF-SIMS. The amines were derivatized by reaction with 1,4-butane sultone and sulphuric acid sequentially to afford the corresponding sulphonic acidic ionic liquids (ILs). The TOF-SIMS analysis of these task-specific ILs (TSILs) was carried out in both positive and negative polarity. The positive ion mass spectra of TSILs showed sharp fragmented peaks for tertiaryalkyl amines at typical level and up to 10 ppm. The possible mechanism for different fragmentation pathways in positive polarity was discussed.     

A selective electromembrane extraction of uranium (VI) prior to its fluorometric determination in water

A novel method for the selective electromembrane extraction (EME) of U⁶⁺ prior to fluorometric determination has been proposed. The effect of extraction conditions including supported liquid membrane (SLM) composition, extraction time and extraction voltage were investigated. An SLM composition of 1% di-2-ethyl hexyl phosphonic acid in nitrophenyl octyl ether (NPOE) showed good selectivity, recovery and enrichment factor. The best performance was achieved at an extraction potential of 80 volts and an extraction time of 14 minutes Under the optimized conditions, a linear range from 1 to 1000 ng mL⁻¹ and LOD of 0.1 ng mL⁻¹ were obtained for the determination of U⁶⁺. The EME method showed good performance in sample cleanup and the reduction of the interfering effects of Mn²⁺, Zn²⁺, Cd²⁺, Ni²⁺, Fe³⁺, Co²⁺, Cu²⁺, Cl⁻ and PO₄³⁻ ions during fluorometric determination of uranium in real water samples. The recoveries above 54% and enrichment factors above 64.7 were obtained by the proposed method for real sample analysis.     

tert‐Butyl Hypoiodite for Deoximation

tert‐Butyl hypochlorite and tert‐butyl hypobromide react with aldoximes and convert them into hydroximinoyl chloride and bromide, respectively; however, under the same reaction conditions, tert‐butyl hypoiodite deoximates aldoximes and ketoximes to give corresponding aldehydes and ketones in high yield (>94%) in a short reaction time (～20 min).