Radiation-Induced Polymerization of Ethyl Vinyl Ether in n-Pentane and Neopentane

The radiation-induced polymerization of ethyl vinyl ether was studied in n-pentane and neopentane solutions under super-dry conditions. The free ion yields of these solvents are reported to be 0.16 and 1.0, respectively. The rate of polymerization in neopentane was about twice as fast as in n-pentane. The dose-rate dependence of the rate of polymerization was found to be nearly 0.50 in both solutions. It seems clear that the free solvent ions do, indeed contribute to the initiation. Regenerative chain transfer to monomer played a more important role in n-pentane than in neopentane as revealed by the molecular weight of the polymers.     

Preparation and Characterization of New Optically Active Poly(amide-imide)s from N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine and Aromatic Diamines

Five new optically active aromatic poly(amide-imide)s (PAIs) 5a–e were prepared from a direct polycondensation reaction of a new diacid of N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine 3 with various aromatic diamines 4a–e in a medium consisting of triphenyl phosphite (TPP), calcium chloride (CaCl₂), pyridine (Py) and N-methyl-2-pyrrolidone (NMP). The polycondensation reaction produced a series of novel poly(amid-imide)s 5a–e in quantitative yields with inherent viscosities of 0.39–0.51 dL/g. The resulting polymers were fully characterized by means of ¹H-NMR, FT-IR spectroscopy, elemental analyses, inherent viscosity, solubility test, specific rotation and thermal properties of them were investigated using TGA/DTG and differential scanning calorimeter (DSC). The diacid 4 was synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6- tetracarboxylic dianhydride 1 with L-isoleucine 2 in acetic acid solution.     

Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

Solution-processed bilayer photovoltaic devices with nematic liquid crystals

The cross-linking of polymerisable liquid crystalline semiconductors is a promising approach to solution-processable, multilayer, organic photovoltaics. Here we demonstrate an organic bilayer photovoltaic with an insoluble electron-donating layer formed by cross-linking a nematic reactive mesogen. We investigate a range of perylene diimide (PDI) materials, some of which are liquid crystalline, as the overlying electron acceptor layer. We find that carrier mobility of the acceptor materials is enhanced by liquid crystallinity and that mobility limits the performance of photovoltaic devices.     

Synthesis of terminally substituted stilbene-tolane liquid crystals

Methods for synthesizing substituted alkyl and fluoro stilbene-tolane (PTPDP) liquid crystal materials are presented. These compounds show a slightly higher birefringence than the analogous bistolanes, but higher melting points and heats of fusion. Potential applications of these compounds for optical communications and displays are discussed.     

Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells

In several photovoltaic (PV) technologies, the presence of electronic defects within the semiconductor band gap limit the efficiency, reproducibility, as well as lifetime. Metal halide perovskites (MHPs) have drawn great attention because of their excellent photovoltaic properties that can be achieved even without a very strict film‐growth control processing. Much has been done theoretically in describing the different point defects in MHPs. Herein, we discuss the experimental challenges in thoroughly characterizing the defects in MHPs such as, experimental assignment of the type of defects, defects densities, and the energy positions within the band gap induced by these defects. The second topic of this Review is passivation strategies. Based on a literature survey, the different types of defects that are important to consider and need to be minimized are examined. A complete fundamental understanding of defect nature in MHPs is needed to further improve their optoelectronic functionalities.     

Preparation and structural determination of siloxane-modified sulfone-containing epoxy resins

Siloxane-modified sulfone-containing epoxy resins (ESBS) were prepared by polycondensation of PMPS and/or PDMS siloxane oligomers with EBS, the sulfone-containing epoxy resin. Structures were analyzed by IR, ¹H-, and ¹³C-NMR. The siloxane content in the copolymers was determined by ¹H-NMR with an integration technique. Epoxy equivalent weight (EEW) determination indicated that the oxirane ring of EBS was intact with this hot-melt procedure. The GPC measurement of these ESBS copolymers showed that molecular weight (MW) increased with increasing siloxane content in PMPS-modified copolymers. Evidence of siloxane incorporation in the copolymer was discussed. © 1996 John Wiley & Sons, Inc.     

Synthesis of silylene-vinylene oligomers via catalytic polycondensation of divinyldimethylsilane

Acyclic diene polymerization (ADP) of divinyldimethylsilane in the presence of ruthenium RuCl₂(PPh₃)₃ and rhodium [RhCl(cod)]₂ catalysts led predominantly to linear silylene-vinylene oligomers (M_n = 1510 and M_w/M_n = 1.19) if the ruthenium catalyst was used or to mixture of cyclic and linear oligomers if rhodium complex was catalyst. © 1996 John Wiley & Sons, Inc.     

Photopolymerization studies of alkyl and aryl ester derivatives of ethyl α-hydroxymethylacrylate

Several new benzoate ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using phase transfer catalysis and found to display unexpectedly rapid photopolymerization; i.e., from 2 to 8 times faster than MMA. New derivatives described here include the 4-fluoro-, 4-trifluoromethyl-, 4-methyl-, 2-hydroxy-, 4-nitro-, 4-methoxy-, 4-cyano-, and 3,4,5-trimethoxybenzoate esters along with the parent benzoate ester. Relative reactivities of these monomers in photopolymerizations were compared with those of the nonaromatic formate, acetate, hexanoate, and stearate derivatives. Reactivities of the nonaromatic ester derivatives increased with the length of the side chain while for the more reactive aromatic esters, rates increased in the order 4-methyl-, 4-fluoro- and benzoate < 4-trifluoromethyl- and 2-hydroxy- < 4-cyano- < 4-methoxy- < 3,4,5-trimethoxybenzoate. T_gs of the benzoate polymers ranged from 125°C for the 4-fluoro to 163°C for the 4-cyanobenzoate while those of the alkyl ester derivatives ranged from 15 to 78°C. Number average molecular weights of photoinitiated polymers (ca 10,000–20,000) were lower than those found for bulk and solution polymers (20,000—708,000) consistent with higher radical concentrations from photoinitiation. These materials greatly expand the number of candidates available for rapid photocure in thin film and coating applications, especially because their physical properties are those of linear rather than highly crosslinked structures formed from multifunctional systems. © 1996 John Wiley & Sons, Inc.