Aging effect on the mechanical properties of hybrid gels

Sol-gel derived unsupported films and thin rods have been obtained from co-hydrolysis of triethoxysilane and methyldiethoxysilane. The materials are flexible, dense and transparent. Films and rods have been aged for different periods of time in air at room temperature. The elastic modulus has been measured by means of tensile or flexural tests. Measurements showed an increase of elastic modulus with aging time and showed different values for films and rods. The observed evolution of mechanical properties has been related to a corresponding structural modification as highlighted mainly by MAS-NMR studies. Analyses pointed out the crucial role of condensation processes and showed that the stiffness increase arises from the formation of relatively few bonds which link and constrain pre-existing mobile network regions.     

Quantitative evaluation of stress distribution in bulk polymer samples through the comparison of mechanical behaviors between giant single‐crystal and semicrystalline samples of poly(trans‐1,4‐diethyl muconate)

The Raman shift and crystallite modulus were measured under the application of tensile force for a giant single crystal and a series of uniaxially oriented semicrystalline samples of poly(trans‐1,4‐diethyl muconate) (polyEMU). The apparent Raman shift factor α^app or a vibrational frequency shift per 1 GPa tensile stress was higher for the semicrystalline samples with lower crystallinity or lower bulk modulus. The apparent crystallite modulus E or Young's modulus along the chain axis in the crystalline region was not constant but varied remarkably between the giant single crystal and semicrystalline samples. A systematic change in α^app and E among the polyEMU samples with different preparation history could be interpreted quantitatively on the basis of a mechanical series parallel model consisting of crystalline and amorphous phases. The origin of different E and α^app was speculated to be a stress concentration on the taut‐tie chain contained as a parallel crystalline component in the mechanical model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 444–453, 2003     

计量置换参数Z值分量的测定(英文)

 以计量置换吸附理论(SDT A)为基础,从理论上推导出计量吸附模型中表征溶质对固定相亲合势大小的参数βa值与流动相中强置换剂浓度的对数呈线性关系。计量置换模型中的参数n和q(n和q分别代表1摩尔溶剂化溶质被吸附时,从吸附剂表面和从溶质分子表面所释放出的溶剂的物质的量)是计量置换参数Z值的分量,是两个非常有用的参数,可以从这个定量关系中直接获得。推导出的方程用苯的衍生物进行了实验验证,获得了较满意的结果。将这种方法计算得到的分量值与SDT A与计量置换保留模型(SDT R)相结合的方法得到的分量值进行了比较。     

Construction of database of effective energy‐loss functions

Effective energy‐loss functions for Al, Cu, Ag and Au were derived from the reflection electron energy‐loss spectroscopy (REELS) spectra for 1 keV electrons using extended Landau theory. Features of the obtained effective energy‐loss functions are close to those of optical surface energy‐loss functions, revealing the significant contribution of the low energy loss below a few tens of electron‐volts in the REELS spectrum for Cu, Ag and Au. The REELS spectra were reproduced using the newly derived effective energy‐loss functions, leading to the confirmation that this type of database of the effective energy‐loss function is very useful not only for more comprehensive understanding of the measured spectrum of surface electron spectroscopies but also for practical background subtraction in surface electron spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

Study of bulk chain coupling reactions. I. Reaction between bisoxazolones and amine-terminated polyamide 12

2,2′-Bis(4,4-dimethyl-5(4H)-oxazolone) ( B3 ) and 2,2′-(1,2-ethylene)-bis(4,4-dimethyl-5(4H)oxazolone) ( B4 ) have been reacted in the bulk with α, ω-diamino polyamide-12 ( PA12 ) of M?_n = 1000. The reactions have been studied by SEC, and ¹H- and ¹³C-NMR and resulting polymers characterized by DSC and TGA. The chain coupling reaction is fast and gives high molar mass polymers within 10 min at 200°C with B4 while some side reactions occur with B3 leading to polymers of lower molar mass. The crystallinity of resulting polymers is lower than that of starting oligomer. However, the thermal stability is higher. Model reactions using B3 or B4 and hexamethylene diamine or 1-dodecanamine have been carried out and studied. An intramolecular cyclodehydration giving 2-imidazolin-5-ones takes place during the reactions. Higher cyclization extent is found in the presence of amino group excess. 2-Imidazolin-5-one heterocyclic structures are also observed in the chains of the polymers obtained from PA12 and B3 or B4 . © 1993 John Wiley & Sons, Inc.     

Isotope Effect on Fractional Dilatability of Solute Water as an Indicator of the H-Bonding Ability of an Aprotic Dipolar Solvent

Based on experimental data about the density of very dilute solutions of H₂O and D₂O in 1,4-dioxane, hexamethylphosphotriamide, and acetonitrile at 278.15 K-318.15 K we determined the limiting partial molar volume (error ±0.03 cm³·mol⁻¹) and dilatability of the water component. A correlation equation has been derived which relates the isotope effect (IE) in the limiting excess partial molar dilatability of water to the energy of the H₂O-solvent hydrogen bond. The stated IE may be used as a “structural indicator” for evaluating the ability of an aprotic dipolar solvent to undergo specific interactions through hydrogen bonding.Original Russian Text Copyright © 2004 by E. V. Ivanov, V. K. Abrosimov, and E. Yu. Lebedeva__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 6, pp. 1020–1026, November–December, 2004.     

General analysis of the measurements of the lateral crystal lattice moduli of semicrystalline polymers by x-ray diffraction and the application to nylon 6

A mathematical representation based on a linear elastic theory is proposed by which one may investigate the dependences of molecular orientation and crystallinity on the crystal lattice moduli and linear thermal expansion coefficients in the direction perpendicular to the chain axis as commonly measured by x-ray diffraction. In the theoretical calculation, a previously introduced model was employed in which oriented crystalline phase is surrounded by oriented amorphous phase and the strains of the two phases at the boundary are identical. The mathematical analysis indicated that the lateral crystal lattice moduli and linear thermal coefficients as measured by x-ray diffraction may be different from the intrinsic crystal moduli and linear thermal coefficients of a crystal unit cell, depending on the structure of the polymer solid. The numerical calculation was applied to nylon 6. As a result, it may be confirmed that the lateral crystal lattice moduli measured by x-ray diffraction are sensitive to the morphology of the bulk speciments and close to the intrinsic crystal moduli if the morphology of the test specimen can be represented by a parallel model with respect to the original stretching longitudinal direction.     

Swelling behavior and mechanical properties of endlinked poly (dimethylsiloxane) networks and randomly crosslinked polyisoprene networks

Measurements of the equilibrium degree of swelling and of the equilibrium modulus were performed on poly(dimethylsiloxane) networks (PDMS) and on polyisoprene vulcanizates. The results support the concept that topological interactions between network chains, e.g. entanglements or the like, have a large influence on the rubber elastic behavior, at least within a certain range of network densities.PDMS networks having network chains of different lengths and varying functionlities of the crosslinks were prepared in bulk by endlinking fractionated ,-divinyl PDMS via multifunctional hydrogen-siloxanes (f=3 to 22). Natural rubber (NR) and synthetic liquid polyisoprene (IR) were cured in bulk with various amounts of dicumyl peroxide to give randomly crosslinked samples.The experimentally determined moduli and degrees of swelling were compared with theoretical predictions based on the phantom network theory and affine network theory, taking into account only chemical crosslinks. The observed discrepancies can be traced back to a contribution of topological interactions (trapped entanglements) to the total effective network density. The modulus and swelling data are consistent, thus ruling out non-equilibrium effects.     

Surface and bulk properties of severely fluorinated carbon fibres

The development of ultra-inert composites using fluorinated carbon fibres as the reinforcement requires fluorinated carbon fibres with a durable surface composition. Here we report the effect of direct fluorination using an F₂/N₂ mixture at 653 K on the surface and bulk properties of two types of high strength carbon fibres. These were treated up to a surface fluorine content of ∼64 at.% and a bulk fluorine content of ∼15 mass%. A colour change was observed after fluorination caused by the changes in the graphitic band structure of the carbon fibres by the introduction of carbon sp³ hybridisation. The tensile strength and Young's modulus decrease after fluorination by up to 33 and 22%, respectively. XRD shows marginal changes in the interlayer distance but the crystallite size increases. Changes in the electrical conductivity of the fluorinated carbon fibres indicate that the modification is confined to the near surface volume. Predominantly covalent C-F bonds are formed as shown by X-ray photoelectron spectroscopy (XPS) and measured zeta (ζ)-potentials. Hence the fluorinated fibres are hydrophobic and have low surface tensions. This and the large increase in fibre surface area, as determined by nitrogen adsorption, is expected to facilitate interfacial interaction between fluorinated carbon fibres and fluoropolymers.     

Analysis of Terbumeton and its Major Metabolites by SPE and DAD-HPLC in Soil Bulk Water

A rapid and inexpensive method for simultaneous quantification of terbumeton (TER), and its major potential metabolites (TED; terbumeton-desethyl, TOH; terbumeton-2-hydroxy and TID; terbumeton-deisopropyl) in soil bulk water (SBW) samples is proposed. The analytical method involves extraction–concentration from SBW samples using a graphitized carbon black (GCB) cartridge followed by their separation–detection by reversed-phase high-performance liquid chromatography analysis using a C₁₈ column and a diode array detector. A mobile phase of acetonitrile−0.005 mol L⁻¹ phosphate buffer (pH 7.0) (35:65, v/v) at a flow rate of 0.8 mL min⁻¹ in isocratic elution mode has been used. After optimization of the extraction and separation conditions, this method can be used for the simultaneous determination of investigated compounds in the range of the international limits of 0.1 μg L⁻¹. For TER the detection limit was 0.009 μg L⁻¹ and it was 0.100, 0.550, and 0.480 μg L⁻¹ for TED, TOH, and TID, respectively. The recoveries of TER, TED, TOH, and TID from SBW samples, measured at three levels of concentration range, were found to be between 48.0 and 102.0%. The intra-day precision measured by relative standard deviation (RSD) was always lower than 9.0%.