用稀土多元渗法制备钾稀土钨青铜KxLayWO3的XPS研究

Potassium tungsten bronze K_xLa_yWO₃ (x>0.5 and y<0.01) was synthesized by rare earth co-permeation method using α-K₇[SiMg₃(OH₂)₃W₉O₃₇] as the precursor. Binding energies of La, W, O and C were determined by XPS. From the XPS data, a peak at 34.21 eV indicates that some W⁶⁺ turned into W⁵⁺ by rare earth co-permeation. The binding energies La3d were the same in the surface and inner of the composite, showing that rare earth element La could diffuse into the body of the composite and the compound of K_xLa_yWO₃ was formed at the same time. The binding energies of O1s in K_xLa_yWO₃ surface were 531.4 eV and 532.0 eV, respectively, while peak at 531.4 eV disappeared through etching process. The result implies that the binding energy of 531.4 eV was due to the adsorbent O. In addition, the binding energies of C1s in the surface were 283.5 eV, 285.0 eV and 286.7 eV respectively, while the inner had only one peak at 285.0 eV due to standard C1s. This proves that there was no C in the core.     

Modulation Mechanism of Transition Elements Fe and Mn on the Interface Bonding Performance of Bronze/Diamond Composites

The modulation mechanism of iron (Fe) and manganese (Mn) in transition-metal elements on the interface bonding and mechanical properties of bronze (Cu₃Sn)-based/diamond composites is investigated through first-principles calculations. Transition-elements-doping scenarios are investigated employing six-layer slab models. It is revealed that the doping of Fe or Mn can make the Cu₃Sn/diamond interface more stable, which effectively improves the wettability of the Cu₃Sn/diamond interface based on the calculation results and analysis of interface energy, differential charge density model, and density of states. However, co-doping with both Fe and Mn weakens the wettability of the Cu₃Sn/diamond interface. Finally, wettability tests and microstructure characterizations demonstrate that the doping of Fe and Mn represents an effective approach to controlling the interface bonding performance of bronze/diamond composites.     

膦酸酯类离子液体作为钢/铜锡合金润滑剂的摩擦学性能及其机理研究

合成了三种膦酸酯类离子液体,在微动摩擦磨损试验机SRV-IV上评价其作为钢/铜锡合金润滑剂的摩擦学性能,并与全氟聚醚及传统离子液体1-甲基-3-丁基咪唑六氟磷酸盐对比.采用扫描电子显微镜(SEM)及X射线光电子能谱仪(XPS)对磨斑表面进行了分析.结果表明:所合成的膦酸酯类离子液体在常温及高温下均表现出优于全氟聚醚及1-甲基-3-丁基咪唑六氟磷酸盐离子液体的摩擦学性能.离子液体分子的极性使其形成有效的吸附润滑膜,并且膦酸酯类离子液体与金属基底发生了摩擦化学反应,形成了摩擦化学反应膜,从而使该离子液体表现出优异的摩擦学性能.     

新铌酸盐Sr5LnTi3Nb7O30的结构与介电性能

在SrO-Ln2O3-TiO2-Nb2O5(Ln=La, Y)体系中,通过固相反应法，合成了填满型钨青铜结构新铌酸盐Sr5LaTi3Nb7O30与Sr5YTi3Nb7O30.分别采用X射线衍射分析、扫描电镜进行了结构分析,并进行了介电性能测试.结果表明, Sr5LaTi3Nb7O30室温时为四方钨青铜结构顺电相,晶胞参数a=1.233 60(4) nm, c=0.388 01(2) nm;频率为1 MHz时,其陶瓷的室温相对介电常数为466,介电损耗约为5×10－3.Sr5YTi3Nb7O30为弛豫性铁电体, 10 kHz时居里温度为260 ℃;室温时为四方钨青铜结构铁电相,晶胞参数a=1.228 80(4) nm, c=0.387 05(2) nm; 1 MHz时,陶瓷体的室温相对介电常数为290.     

钙钒青铜/碳纳米管复合材料的 制备及电化学性能

采用水热法制备了具有二维层状结构的钙钒青铜(Ca_xV₂O₅·nH₂O, CVO)水系锌离子电池钒基正极材料, 并通过调控前驱体溶液中碳纳米管的含量, 得到3种钙钒青铜/碳纳米管复合材料(CVO@CNTs). 利用X射线衍射、 热重分析、 扫描电子显微镜和透射电子显微镜等对材料进行了表征. 结果表明, 所制备的CVO呈纳米带形貌, 长约十几微米, 宽约几百纳米, 选区电子衍射测试表明所得材料为单晶结构. 循环伏安测试结果表明, CVO和CVO@CNTs均具有多个氧化还原峰, 储锌机制包括赝电容行为和电池行为. 在放电倍率1C(1C=300 mA/g)测试条件下, CVO纳米带比容量稳定在210.1 mA·h/g; 与CNTs复合后, CVO@CNTs复合材料的电荷转移阻抗降低, 在相同测试条件下表现出更高的比容量和优异的倍率性能. 其中, CVO@CNTs-40表现出最高的比容量, 在1C倍率测试条件下的比容量可达274.3 mA·h/g, 即使在20C的测试条件下放电比容量仍可达85.2 mA·h/g, 且循环1000次后容量保持率能达到92%.     

pH Monitoring: a review

Glass pH electrodes are being utilized for the measurement of pH values using liquid internal reference systems, which had been introduced on principle nearly hundred years ago and are still existing. To avoid several drawbacks in the practical usage of these kinds of chemical sensors, every effort has been made to develop an all-solid-state electrode with properties that are comparable to those of the conventional glass electrode. Metal oxide electrodes like RuO₂ or IrO _x are a low-priced alternative. Different concepts for substituting the conventional (aqueous) reference system by solid systems and also for changing the classical bulb shape design to a planar structured one have been proposed. A suitable reference system can be achieved by means of modification of classic reference electrodes by employing a new type of mixed conducting oxides. Both metal oxide and glass electrodes can be screen-printed on substrate materials like ceramics and plastics etc. to get miniaturized all-solid-state electrodes. pH sensors based on field effect transistors (FET) become more important. However, up to now an equivalent FET compatible reference electrode is not available.     

古代铜矿冶炼过程中稀土元素的变化研究

主要研究稀土元素在铜矿冶炼过程中的变化规律及其在冶金考古中的潜在应用。实验采用电感藕合等离子体发射光谱仪(ICP-AES)测试了湖北铜绿山、宁夏照壁山、山西中条山和内蒙古林西大井古代矿冶遗址的铜矿石，炼渣和铜锭的稀土元素含量，通过对其稀土总量和稀土配分模式的对比研究，探讨了稀土元素在古代铜矿冶炼过程中的化学行为。结果发现稀土元素在铜矿冶炼过程主要富集在炼渣中，金属铜中的稀土元素含量很低。因此，要想根据青铜器中的稀土元素特征示踪铜料来源，是很难实现的。通过对比各矿冶遗址的铜矿石、炼渣和铜锭的稀土配分曲线，发现炼渣的稀土配分曲线为判断古代所使用的冶炼技术及铜矿石的输出路线提供了可能。     

Formation and Oxidation of Hydrogen Molybdenum Bronze on Platinum Electrode in Sulfuric Acid Solution

Hydrogen molybdenum bronze (HxMoO3) can be electrodeposited on platinum and oxidized in two steps to the hydrogen molybdenum bronze with less amount of hydrogen HyMoO3 (y相似文献   

棕青铜单晶低温电阻—温度特性研究

我们利用ＥＨＴＳ方法首次制备了棕青铜单晶，经ＥＤＳ谱分析，其分子式为Ｋ０．０１ＭｏＯ３研究表明，棕青铜在７７～３００Ｋ温区呈金属导电性，室温电阻率为４．２×１０－４Ω·ｃｍ，电阻－温度系数为３．６×１０－３／Ｋ；真空退火后其电阻率减小，氧退火后电阻车增大两个数量级，且在２５０￣３００Ｋ出现负温度系数。     

拉曼光谱对古青铜矛腐蚀情形的无损研究

应用显微拉曼光谱对云南楚雄万家坝出土的古青铜矛进行无损研究 ,可确定其腐蚀产物的成分及在样品上的位置 ,还可帮助分析青铜矛所经历的腐蚀环境。腐蚀产物的主要成分有 Cu2 O和 Cu CO3.Cu( OH) 2 。本文还辅以电子探针测试 ,对矛尖的抗腐蚀性作了分析研究。与传统的鉴别方法如电镜、X光衍射等分析法相比较 ,拉曼光谱被证实是对金属器物作无损检测的一种非常有用的方法