Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension

The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.     

Role of Bulk Vaporization in the Dynamics of Laser-Induced Erosion Plumes of Metals

In different regimes of exposure of metals to pulsed laser radiation, we show the role played by the liquid-drop phase formed from the target material in a laser-induced erosion plume due to bulk vaporization, in the dynamics of this plume. For some metals, the ranges of power densities of the acting laser radiation, at which the condensed-phase particles influence the passage of laser radiation to the target surface, have been determined experimentally. The mechanism of realization of a low-threshold breakdown has been revealed.     

Influence of SiO2 in SiCp on the microstructure and impact strength of Al/SiCp composites fabricated by pressureless infiltration

The effect of SiO₂ in SiC_p and the following processing parameters on the microstructure and impact strength of Al/SiC_p composites fabricated by pressureless infiltration was investigated: Mg content in the aluminum alloy, SiC particle size, and holding time. Preforms of SiC_p in the form of rectangular bars (10 × 1 × 1 cm) were infiltrated at 1150°C in an argon→nitrogen atmosphere for 45 and 60 min by utilizing two aluminum alloys (Al-6 Mg-11 Si and Al-9 Mg-11 Si, wt.%). The results obtained show that the presence of SiO₂ in SiC affects the microstructure and impact strength of the composites significantly. When Al₄C₃ is formed, the impact strength decreases. However, a high proportion of SiC to SiO₂ limits the formation of the unwanted Al₄C₃ phase in the composites. Also, a higher content of Mg in the Al alloy lowers the residual porosity and, consequently, increases the composite strength. The impact strength grows with decrease in SiC particle size and increases considerably when the residual porosity is less than 1%. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 401–418, May–June, 2006.     

Interpretation of the polyelectrolyte and antipolyelectrolyte effects of poly(N‐vinylimidazole‐co‐sodium styrenesulfonate) hydrogels

Hydrogels of N‐vinylimidazole (VI) and sodium styrenesulfonate (SSS) were synthesized in aqueous solution by radical crosslinking copolymerization with N,N′‐methylene‐bis(acrylamide) as crosslinker. Swelling in several saline solutions was measured for hydrogel samples synthesized with different comonomer concentrations (C_T = 10, 25, or 40%) and with SSS mole fractions covering a broad range (f_SSS = 0–0.7), while the crosslinker ratio was 2 wt % in all cases. The degree of swelling in aqueous solution with a specific ionic strength (μ), plotted versus the SSS composition of the feed, shows a minimum for any set of samples synthesized with a fixed C_T. The dependence of swelling on μ shows both polyelectrolyte (f_SSS beyond the minimum) and antipolyelectrolyte behaviors (in the low f_SSS limit). It was found that the nonGaussian factor of the crosslinking density and the polymer‐solvent interaction parameter increase with f_SSS for any C_T. Moreover, in the low f_SSS limit, the osmotic swelling pressure is governed not only by the ionic contribution, but also by the polymer‐solvent mixing and, the concentration of mobile counterions inside the gel is not proportional to the net fixed charge but to the addition of cationic and anionic side groups, what discards the formation of ionic pairs. The antipolyelectrolyte effect is interpreted as due to the increasing protonation of VI as μ goes up. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1683–1693, 2007     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

高剥离类镁等电子序列的磁偶极M1和电四极E2光谱跃迁理论研究

利用全相对论性多组态Dirac-Fock广义平均能级方法，系统地计算了类镁离子3s3p磁偶极Ml^3P2--^3P1和电四极E2 ^2P2--^3P0(Z=20-103)光谱跃迁的能级间隔、跃迁几率和振子强度。计算中考虑了原子核的有限体积效应，进行了高阶Breit修正和QED修正，所得到的能级间隔和最近的实验数据及理论计算值进行了比较。计算结果表明：高原子序数的高荷电离子的磁偶极矩M1和电四极矩E2跃迁几率和中性原子的电偶极E1的相当，在ICF和MCF高温激光等离子体中，磁偶极矩M1和电四极矩E2跃迁过程不容被忽视。     

Mesh-Independent Modeling and Moiré Interferometry Studies of Damage Accumulation in Open-Hole Composite Laminates

Mechanics of Composite Materials - A three-dimensional ply-level modeling of multiple matrix cracking near an open hole in a quasi-isotropic composite laminate was performed. A mesh-independent...     

关于"太阳在银河系中所受引力与到银心距离r的关系"的讨论

讨论了银道面内的引力场强分布和太阳在银河系中所受引力与到银心距离r的关系，指出引力场强g并不是与r的平方成反比，这是由于银河系的大小和形状不能忽略造成的．强调了万有引力定律的适用条件．     

Spectral distributions in nuclei: General principles and applications

The subject of spectral distribution methods where one derives and applies the locally smoothed forms of observables in nuclei is briefly reviewed. It is well understood that the local forms (with respect to energy) of the level density function, expectation values and strength densities are Gaussian, linear (or ratio of Gaussians) and a bivariate Gaussian respectively. To accomodate symmetries in the above forms, one has to deal with multivariate distributions in general; for example the angular-momentum (J) decomposition leads to a bivariate Gaussian form for the level density. These results extend to indefinitely large spaces by method of partitioning and they generate convolution forms. The origin of these remarkable spectral properties is discussed and shell model examples are given to substantiate their applicability to nuclear systems. Spectral distribution theory is a practical, usable theory because the smoothed forms are defined in terms of traces of low particle-rank operators, and the trace information propagates. Finally we discuss the application of the spectral methods for a wide range of nuclear problems; these include binding energies, orbit occupancies, electromagnetic andβ-decay sum rule quantities, analysis of operators, symmetry breaking, numerical level densities, and determination of bounds on time-reversal non-invariant part of nucleon-nucleon interaction.