钠硼硅酸盐玻璃分相及浸析的NMR研究

用多种ＮＭＲ方法，包括＾２９Ｓｉ、＾２３Ｎａ，＾１１Ｂ ＭａＳ及＾２９Ｓｉ ＣＰ／ＭＡＳ ＮＭＲ，研究了一定组成的ａ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２三元体系玻璃在不同温度下分相处理２４小时及用酸浸析处理后的结构变化。结果表明，在低于分相上界临界温度的范围内，存在着一个温度转折点，低于这一温度时，受动力学因素影响，分相未达平衡态，温度愈低，距平衡态愈过，分相愈下完全。超过这一温度，分相可达平衡态，受热力学控     

高效液相色谱法所用大孔硅胶填料的制备

对国产ＧＹＱＧ球形硅胶施加高压水热处理并进行扩孔，制备了用于高效液相色谱法的大孔硅胶填料，考察了扩孔压力，扩孔温度和扩孔时间对平均孔径和比表面积的影响。并将产品日本ＳＩＬ－３００３×１０＾－８ｍ硅胶进行了物理性质和孔分布的对比实验，结果表明ＧＹＱＧ硅胶扩孔后平均孔径为２０～３０ｎｍ接近日本ＳＩＬ－３００３×１０＾－８ｍ硅前平平均孔径２５ｎｍ。display structure     

Silica hybrid nanocomposites

In this work we present experimental results about the formation, properties and structure of sol — gel silica based biocomposite containing Calcium alginate as an organic compound. Two different types of silicon precursors have been used in the synthesis: tetramethylortosilicate (TMOS) and ethyltrimethoxysilane (ETMS). The samples have been prepared at room temperature. The hybrids have been synthesized by replacing different quantitis of the inorganic precursor with alginate. The structure of the obtained hybrid materials has been studied by XRD, IR Spectroscopy, EDS, BET and AFM. The results proved that all samples are amorphous possessing a surface area from 70 to 290 m²/g. It has also been established by FT IR spectra that the hybrids containing TMOS display Van der Walls and Hydrogen bonding or electrostatic interactions between the organic and inorganic components. Strong chemical bonds between the inorganic and organic components in the samples with ETMS are present. A self-organized nanostructure has been observed by AFM. In the obtained hybrids the nanobuilding blocks average in size at about 8–14 nm for the particles.     

溶胶-凝胶法制备铁酸盐超微粒子催化剂

采用溶胶－凝胶法制备了含Zn,Ni,Co的铁酸盐超微粒子催化剂，运用DTA－TG、IR、XRD以及BET比表面测试等手段对所制备的样品进行了表征。同时，考察了铁酸盐对二氧化碳选择性氧化乙苯制苯乙烯的催化性能。结果表明：制备的铁酸盐均为尖晶石型晶体，粒子的比表面积为31．9－36．3m^2/g，晶粒大小约为30－35nm，在由二氧化碳选择性氧化乙苯制苯乙烯的反应中表现出较好的催化活性。     

Tree-gel and loop-gel conversions in nonlinear polymerization

Ａｓｉｓｗｅｌｌｋｎｏｗｎ,ｔｈｅｔｈｅｏｒｙｆｏｒｎｏｎｌｉｎｅａｒｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｗａｓｉｎｉｔｉａｔｅｄｂｙＦｌｏｒｙａｎｄＳｔｏｃｋｍａｙｅｒ[1—3].ＭｉｌｌｅｒａｎｄＭａｃｏｓｋｏ[4—6]ｐｒｏｐｏｓｅｄａｒｅｃｕｒｓｉｖｅｍｅｔｈｏｄｆｏｒｄｅａｌｉｎｇｗｉｔｈｔｈｅｐｒｏｂｌｅｍｏｆｔｈｅｐｏｓｔｇｅｌｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｎｅｔｗｏｒｋｆｏｒｍｉｎｇｐｏｌｙｍｅｒｉｚａｔｉｏｎ.Ｓｔｅｐｔｏ[7]ｉｎｖｅｓｔｉｇａｔｅｄｔｈｅｇｅｌｇｅｌｒｅａｃｔｉｏｎｏｆＲＡｆｔ…     

Lamellar Organo-Bridged Silicones

The acid-hydrolysis of an organo-bridged bisdiethoxysilylated molecular precursor bearing urea groups, (EtO)₂MeSi(CH₂)₃NHCONH(CH₂)₁₂NHCONH(CH₂)₃SiMe(OEt)₂, has been performed in pure aqueous medium. Scanning electron microscopy (SEM) analysis of the resulting insoluble solid revealed plate-like forms with a lamellar structure as determined by powder X-ray diffraction (PXRD) studies with a sharp peak at 28.5 Å. The solid state ²⁹Si MAS-NMR spectrum of this bridged siloxane hybrid is consistent with a moderately condensed material with complete preservation of the Si–C bonds throughout the hybrid network. In comparison, the classical sol–gel hydrolysis-condensation of the molecular precursor in ethanol with stoichiometric amount of water and fluoride anion as catalyst produced an amorphous featureless solid.     

Different protein expression of myocardium from Chinese mini-swine model of myocardial infarct

High-resolution two-dimensional gel electrophoresis (2-DE), followed by computer-assisted image analysis was used to screen protein patterns of normal and infarcted myocardial tissues for quantitative and qualitative differences in protein expression. In the gels of pH 5–8 immobilized pH gradient (IPG) strips, 851 protein spots were detected in normal myocardial tissue and 1 032 protein spots were resolved in infarcted myocardial tissue. Thirteen protein spots only expressed in normal myocardial tissue, and 14 protein spots only expressed in infarcted myocardial tissue. Results also showed that 49 protein spots displayed quantitative changes in expression between normal and infarcted myocardial tissue. Eleven protein spots were subjected to mass spectrometry (MS) analysis and seven proteins were identified by peptide mass fingerprinting (PMF). These proteins may be involved in cardiovascular injury, and could play an important role in the treatment of coronary heart disease. __________ Translated from Chemical Journal of Chinese Universities, 2006, 8(27): 1467–1471 [译自: 高等学校化学学报]     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.     

Preparation of complex carbon-silica adsorbents with different properties

Summary The surface properties of complex adsorbents prepared through the pyrolysis of benzyl and n-heptyl alcohols and their mixtures on the surface of silica gel were investigated. The reactions were carried out in an autoclave at 500°C. A series of adsorbents having different porous structure, chemical nature of the adsorption centers and their topography were obtained. The best resolution of different mixtures was obtained by the carbon-silica adsorbent prepared through the pyrolysis of n-heptanol.