New approaches in radical carbonylation chemistry: fluorous applications and designed tandem processes by species-hybridization with anions and transition metal species

New approaches in radical carbonylation chemistry are described. We have successfully integrated tin mediated radical carbonylation chemistry into modern fluorous applications and separation techniques. We revealed that radical carbonylation reactions can be performed using fluorous tin mediators, such as fluorous tin hydride and fluorous allyltin reagents. Fine tuning of the reaction conditions resulted in a good efficiency equivalent to conventional tin mediators. The tedious procedure of removing organotin byproducts can be circumvented through the use of fluorous/organic liquid-liquid extraction or fluorous liquid-solid phase extraction with fluorous reverse phase silica (FRPS). Also described are newly developed tandem carbonylation reactions that are based on species hybridization approaches. Using a radical/anionic hybrid system based on zinc-induced one-electron reduction, we achieved a three-component coupling reaction consisting of 4-alkenyl iodides, carbon monoxide, and electron-deficient alkenes. We observed two types of annulations processes, namely [4 + 1](radical)/[3 + 2](anionic) and [5 + 1](radical)/[3 + 2](anionic), which lead to the production of bicyclo[3.3.0]octanols and bicyclo[3.2.1]octanols, respectively. We found a radical/palladium hybrid system to be useful in the construction of new cyclic systems that incorporate two or three molecules of carbon monoxide.     

Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

Improved third-order Møller-Plesset perturbation theory

Based on a partitioning of the total correlation energy into contributions from parallel‐ and antiparallel‐spin pairs of electrons, a modified third‐order Møller–Plesset (MP) perturbation theory is developed. The method, termed SCS–MP3 (SCS for spin‐component‐scaled) continues previous work on an improved version of MP2 (S. Grimme, J Chem Phys 2003, 118, 9095). A benchmark set of 32 isogyric reaction energies, 11 atomization energies, and 11 stretched geometries is used to assess to performance of the model in comparison to the standard quantum chemical approaches MP2, MP3, and QCISD(T). It is found, that the new method performs significantly better than usual MP2/MP3 and even outperforms the more costly QCISD method. Opposite to the usual MP series, the SCS third‐order correction uniformly improves the results. Dramatic enhancements are especially observed for the more difficult atomization energies, some of the stretched geometries, and reaction and ionization energies involving transition metal compounds where the method seems to be competitive or even superior to the widely used density functional approaches. Further tests performed for other complex systems (biradicals, C₂₀ isomers, transition states) demonstrate that the SCS–MP3 model yields often results of QCISD(T) accuracy. The uniformity with which the new approach improves for very different correlation problems indicates significant robustness, and suggests it as a valuable quantum chemical method of general use. © 2003 Wiley Periodicals, Inc. J Comput Chem 24: 1529–1537, 2003     

B2O3/TiO2-ZrO2催化环己酮肟气相Beckmann重排反应研究 Ⅰ.B2O3含量的影响

 制备了不同B2O3含量（0～20％）的B2O3／TiO2－ZrO2固体酸催\r\n化剂，用XRD，FT－IR，N2吸附及NH3－TPD等方法测定了其结构、比表\r\n面积、孔分布和表面酸性．结果表明，当B2O3含量较低（≤5％）时，\r\n催化剂呈无定形态，样品中的B2O3主要以BO4结构存在．当B2O3含量较\r\n高（≥8％）时，催化剂中的TiO2－ZrO2以ZrTiO4晶相存在，分散于Ti\r\nO2－ZrO2表面的B2O3主要以玻璃体形式和BO3结构存在．随着B2O3含量\r\n的增加，催化剂的比表面积减小，孔径增大．300℃下的环己酮肟气相\r\nBeck－mann重排反应结果表明，随着B2O3含量的增加，己内酰胺的选择\r\n性逐渐增大，而己内酰胺的收率在B2O3含量为12％时达到最大值．讨论\r\n了B2O3／TiO2－ZrO2的催化性能与其表面酸性及孔径大小的关系．     

Synthesis and magnetic properties of poly(p‐phthaloyl‐disacetylaceton‐ethylenediimine) metal complexes

Macrocyclic Schiff‐base ligand, bisacetylaceton‐ethylenediimine (BAE) and its transition metal complexes M(BAE) (M = Cu²⁺, Ni²⁺) were synthesized. The complexes having characteristics of aromatic systems and well‐defined one‐dimensional structures, reacted with p‐phthaloyl chloride, to obtain polymer complexes. The complexes were characterized by elemental analysis, inductively coupled plasma (ICP), FT‐IR, and thermal analysis and show good thermal stability. ESR spectra analysis discovered that there are free radicals in the chain of polymers, indicating that a weak magnetic spin‐exchange interaction operates between the metal ions and free radicals. It is found that, as the bridging p‐phthaloyl group is able to propagate the magnetic exchange interaction, the polymer complexes show paramagnetic properties by measurement of temperature dependence of the magnetic property, and obey Curie–Weiss law. Copyright © 2001 John Wiley & Sons, Ltd.     

粗糙化银电极上氰基钴胺素的电化学行为

比较研究氰基钴胺素在光滑和粗糙化银电极上的电化学行为，发现在光滑银电极上氰基钴胺素的还原为一个二电子过程，而在粗糙化银电极上则为两个一电子过程，其原因是由于粗糙化银电极对氰根的强吸附作用。     

硫化物/Ru(II)络合物复合敏化TiO2纳米多孔膜

用光电化学方法研究了ＣｄＳ,ＰｄＳ和Ｒ１１Ｌ２（ＮＣＳ）２,（Ｌ＝２,２′－ｂｉｐｙｄｉｎｅ－４,４′－ｄｉｃａｒｂｏｘｙｌｉｃａｃｉｄ）复合敏化ＴｉＯ２纳米晶电极的光电化学行为,结果表明,采用复合敏化比用Ｒ１１（ＩＩ）络合物单独敏化ＴｉＯ２纳米晶电极效果好,大大提高了光电转换效率,主要原因是采用复合敏化,可防止ＴｉＯ２导带上由光注入产生的电子的反向转移,避免了电子的损失。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Trifluoromethyl‐Radical‐Mediated Carbonylation of Alkanes Leading to Ethynyl Ketones

The carbonylation of alkanes 1 under radical‐reaction conditions was examined by using ethynyl triflone A as the unimolecular chain‐transfer (UMCT) reagent. Good to moderate yields of ethynyl ketones 2 were prepared by means of this three‐component coupling reaction. Higher CO pressures as well as lower concentrations of triflone A improved the efficiency of the reaction over the direct addition, the latter leading to alkylated ethynes 3 . In contrast to the reaction with A , the reaction of cyclohexane ( 1a ) with allyl triflone B (= ethyl 2‐methylene‐3‐[(trifluoromethyl)sulfonyl]propanoate) in the presence of CO gave a mixture of carbonylation products, including 8a formed from two molecules each of cyclohexane, CO, and allyl triflone B .     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.