Synthesis of BEDT-TTF derivatives with carboxylic ester and amide functionalities

Synthetic routes to BEDT-TTF derivatives bearing side chain carboxylic ester and amide groups are reported. Methyl ET-ethanoate was prepared in five steps from vinylacetic acid; amide groups were installed early in the synthesis by mixed anhydride methods before the final coupling reaction.     

A quantum chemical study on structure of 1,2-bis(diphenylphosphinoyl)ethane and phenol cocrystal

The cocrystal of 1,2-bis(diphenylphosphinoyl)ethane (DPPEO) with phenol (1:1) were studied theoretically with AM1, PM3, MNDO and MINDO/3 semi-empirical methods to elucidate its structure. The bond lengths and angles from theoretical studies of molecule DPPEO/phenol (1:1) were found to be as expected. Theoretical results, concerning with intermolecular van der Waals forces in cocrystal, were compared with the previously obtained experimental data and AM1 results were found to be the best fit for bond lengths and angles of DPPEO/phenol.     

Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Temperature coefficient of NH chemical shifts of thioamides and amides in relation to structure

NH chemical shift temperature coefficients have been measured in a large series of N-substituted-3-piperidinethiopropionamides in which the NN distances are short but of varied length, as well as in a couple of the corresponding amides and in some simpler amides and thioamides. Geometries are calculated by means of ab initio DFT methods. The N-substituted-3-piperidinethiopropionamides show in most cases strong intramolecular N–HN hydrogen bonds according to IR spectra and ab initio calculations. For compounds with rather short NN distances the S=C–N–H moiety is non-planar. Dihedral angles as small as 160° are found. The NH chemical shift coefficients measured in non-polar solvents in all the N-substituted-3-piperidinethiopropionamides are more negative (−8 to −17 ppb/K) than in non-hydrogen bonded thioamides. For the latter in non-polar solvents like CDCl₃ and toluene the temperature coefficients are as small as −1 to −4 ppb/K. The large negative effects can be related not only to the non-planarity of the thioamide group in a way that the more pronounced the non-planarity the more negative the temperature coefficients, but also to strong hydrogen bonding and the fact that the acceptor is a nitrogen. For similar amides with non-planar amide groups and nitrogen acceptor large negative temperature coefficients are likewise seen. In polar solvents like DMF the effects in simple thioamides are uniform and close to −6 ppb/K, whereas in the more complex compound like 4p(t) the temperature coefficient is close to 0. An essential feature of measuring temperature coefficients of compounds without strong intramolecular hydrogen bonds in non-polar solvents and at low temperatures is to keep the concentration low enough to avoid dimerisation.     

On the hysteresis of vortex shedding in a periodically-varying flow

Efforts are made to explore the hysteresis characteristics of vortex shedding in a pipe flow, whose velocity varies periodically in time. Results obtained show that during acceleration of the flow, the vortex strength tends to be stronger, whereas during deceleration of the flow, the situation is reversed. As reconstructed from the velocity signals measured at a point in the flow field, the shed vortex arrays appear to possess uneven vortex strengths in response to periodically-varying incoming flows. Furthermore, in the hysteresis range, the streamwise spacings between the vortices appear to be unequal.     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Segmental and secondary dynamics in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) blends

Broadband dielectric spectroscopy was used to study the segmental (α) and secondary (β) relaxations in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) (PVPh/PMMA) blends with PVPh concentrations of 20–80% and at temperatures from ?30 to approximately glass‐transition temperature (T_g) + 80 °C. Miscible blends were obtained by solution casting from methyl ethyl ketone solution, as confirmed by single differential scanning calorimetry T_g and single segmental relaxation process for each blend. The β relaxation of PMMA maintains similar characteristics in blends with PVPh, compared with neat PMMA. Its relaxation time and activation energy are nearly the same in all blends. Furthermore, the dielectric relaxation strength of PMMA β process in the blends is proportional to the concentration of PMMA, suggesting that blending and intermolecular hydrogen bonding do not modify the local intramolecular motion. The α process, however, represents the segmental motions of both components and becomes slower with increasing PVPh concentration because of the higher T_g. This leads to well‐defined α and β relaxations in the blends above the corresponding T_g, which cannot be reliably resolved in neat PMMA without ambiguous curve deconvolution. The PMMA β process still follows an Arrhenius temperature dependence above T_g, but with an activation energy larger than that observed below T_g because of increased relaxation amplitude. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3405–3415, 2004     

Study on the covalence of Cu and chemical bonding in an inorganic fullerene-like molecule, [CuCl]20[Cp*FeP5]12 [Cu-(CH3CN)+2Cl-]5, by a density functional approach

The electronic structure and chemical bonding in a recently synthesized inorganic fullerene-like molecule, [CuCl]₂₀[Cp*FeP₅]₁₂[Cu-(CH₃CN) ⁺ ₂Cl⁻]₅ has been studied by a density functional approach. Geometrical optimization of the three basic structural units of the molecule is performed with Amsterdam Density Functional Program. The results are in agreement with the experiment. Localized MO’s obtained by Boys-Foster method give a clear picture of the chemical bonding in this molecule. The reason why CuCl can react with Cp*FeP₅ in solvent CH₃CN to form the fullerene-like molecule is explained in terms of the soft-hard Lewis acid base theory and a new concept of covalence.     

Study on the covalence of Cu and chemical bonding in an inorganic fullerene-like molecule, [CuCl]_(20)[Cp~*FeP_5]_(12)[Cu-(CH_3CN)_2~+Cl~-]_5, by a density functional approach

The titled inorganic fullerene-like molecule (hereafter abbreviated as IFM) was recently synthe-sized by Bai et al.[1], which attracts a lot of interests from inorganic and organometallic chemists, and questions are raised for this smart molecule: (ⅰ) Why CuCl can react with Cp*FeP5 in solvent CH3CN to form IFM? (ⅱ) What is the nature of chemical bond-ing? (ⅲ) What is the covalence of Cu in this mole-cule? In this paper we intend to answer these questions in terms of the soft-hard …     

类铜离子的电子碰撞参数及其规律

用准相对论扭曲波方法系统地计算了Ｂａ、Ｎｄ、Ｇｄ、Ｙｂ、Ａｕ、Ｐｂ类铜离子组态能级之间的电子碰撞激发强度Ω（ｎｌ－ｎｌ），３≤ｎ≤７，４≤ｎ≤７，同时给出了高能极限的碰撞强度和外推到阈值的碰撞强度，用最小二乘样条方法拟合了全能域碰撞强度及热平均速率系数。对于一个激发过程，用１０个参数可以得到碰撞电子在任意能量下的碰撞强度以及任意温度下的速率系数。