New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Segmental and secondary dynamics in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) blends

Broadband dielectric spectroscopy was used to study the segmental (α) and secondary (β) relaxations in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) (PVPh/PMMA) blends with PVPh concentrations of 20–80% and at temperatures from ?30 to approximately glass‐transition temperature (T_g) + 80 °C. Miscible blends were obtained by solution casting from methyl ethyl ketone solution, as confirmed by single differential scanning calorimetry T_g and single segmental relaxation process for each blend. The β relaxation of PMMA maintains similar characteristics in blends with PVPh, compared with neat PMMA. Its relaxation time and activation energy are nearly the same in all blends. Furthermore, the dielectric relaxation strength of PMMA β process in the blends is proportional to the concentration of PMMA, suggesting that blending and intermolecular hydrogen bonding do not modify the local intramolecular motion. The α process, however, represents the segmental motions of both components and becomes slower with increasing PVPh concentration because of the higher T_g. This leads to well‐defined α and β relaxations in the blends above the corresponding T_g, which cannot be reliably resolved in neat PMMA without ambiguous curve deconvolution. The PMMA β process still follows an Arrhenius temperature dependence above T_g, but with an activation energy larger than that observed below T_g because of increased relaxation amplitude. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3405–3415, 2004     

Molecular Orbital Calculations on 2, 4, 6-Trinitrotoluene

Three ab initio calculations (HF/6-3IG, HF/6-3IG*, and HF/6-3IG**) on 2,4,6-trinitrotoluene were made, The results compare well with xray data, except dihedral angles of NO₂ relative to the plane of the benzene ring. The deviations are attributed to packing forces and steric effects in the crystal. The most stable structure was a torsional angle 10° of the methyl top with the benzene ring, unlike toluene. The rotational barriers of the methyl top and the 4-nitro group are small. Hydrogen bonding, dipole moments and total atomic charges arc calculated.     

A supramolecular hydrogen‐bonded complex between 1,3,5‐tris(diisobutylhydroxysilyl)benzene and trans‐bis(4‐pyridyl)ethylene

The trisilanol 1,3,5‐(HOi‐Bu₂Si)₃C₆H₃ ( 7 ), prepared in three steps from 1,3,5‐tribromobenzene via the intermediates 1,3,5‐(Hi‐Bu₂Si)₃C₆H₃ ( 8 ) and 1,3,5‐(Cli‐Bu₂Si)₃C₆H₃ ( 9 ) forms an equimolar complex with trans‐bis(4‐pyridyl)ethylene (bpe), 7 ·bpe, whose structure was investigated by X‐ray crystallography. The hydrogen‐bonded network features a number of SiO? H(H)Si and SiO? H hydrogen bridges. Evidence was found for cooperative strengthening within the sequential hydrogen bonds. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of intrachain hydrogen bonding on the cyclization of a polystyrene chain

Cyclization of a polystyrene chain (M_n = 10,600; M_w/M_n = 1.09) both ends labeled with 4-(1-pyrenyl)butanoamide groups was studied in cyclohexane between 25 and 95°C. The amide groups (peptide bonds) at both ends can form an intrachain hydrogen bond between the amide hydrogen at one chain end and the carbonyl oxygen at the other. The presence of two sets of conformers, random coils, and chains cyclized through hydrogen bonding, complicates the data analysis. The pyrene excimer kinetics of this polymer is well described by a model composed of two monomers (hydrogen bonded and nonbonded chains) and one excimer, in equilibrium. The cyclization rate constant for hydrogen-bonded chains is larger than the one for nonhydrogen-bonded chains. The pyrene excimer binding energy (ca. 1.6 kcal/mol) is lower than the published value for nonhydrogen-bonded chains (～ 9 kcal/mol), suggesting that intrachain hydrogen bonding hinders the stabilization of the excimer. © 1994 John Wiley & Sons, Inc.     

A two dimensional, experimental study on the evolution of the detachment and its time-behavior in filled rubber

Summary The detachment of a rubber matrix from a rigid inclusion under monotonic loading and at subsequent relaxation is investigated within two dimensional analysis. Examined are stress–strain experimental data acquired with the help of a test bed equipped with a digital image-acquisition device. The influence of the interfacial bonding strength and the particle size on the detachment process is analyzed. The influence of the interfacial bonding strength is visible in the stress–strain diagram of loading and in the recorded images. The relaxation test reveals no influence of the bonding strength on the stress-relaxation. However, the image analysis indicates a secondary transient creep of the contour of detachment, which depends on the interfacial bonding.     

Template atom transfer radical polymerization of a diaminopyrimidine‐derivatized monomer in the presence of a uracil‐containing polymer

Uracil‐derivatized monomer 6‐undecyl‐1‐(4‐vinylbenzyl)uracil and diaminopyrimidine‐derivatized monomer 2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine (DMP) were synthesized and polymerized by atom transfer radical polymerization (ATRP). A well‐defined, highly soluble, uracil‐containing polymer, poly[6‐undecyl‐1‐(4‐vinylbenzyl)uracil] (PUVU), was prepared in dioxane at 90 °C with CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine as the catalyst and methyl α‐bromophenylacetate as the initiator. PUVU was further used as a template for the ATRP of DMP. The enhanced apparent rate constant of the DMP polymerization in the presence of PUVU indicated that the ATRP of DMP occurred along the PUVU template. The template polymerization produced a stable and insoluble macromolecular complex, PUVU/poly(2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine). An X‐ray diffraction study confirmed that the complex had strandlike domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6607–6615, 2006     

Where are the Sn atoms in LaSb2Snx, 0.1?x?∼0.75?

The composition range and (composite modulated) structure of compounds within the wide range non-stoichiometric LaSb₂Sn_x, 0.1?x?0.75, solid solution is carefully investigated via a combined electron diffraction, XRD and electron probe microanalysis study. Evidence for metastability of the LaSb₂Sn_x phase at the low x composition end of the solid solution is presented. Direct evidence is found for a reasonably (although by no means perfectly) well ordered Sn sub-structure which is, in general, mutually incommensurable with respect to a very well ordered underlying LaSb₂ sub-structure along both a and c directions. The overall (3+2)-d superspace group symmetry is given along with a discussion of the consequences as regards the arrangement of the Sn atoms. The Sn sub-structure c-axis cell dimension shows very little variation with composition x providing direct experimental evidence of the importance of Sn-Sn metallic bonding (along one-dimensional [001] Sn strings) for the stability of the phase.     

Concurrent adsorption and complex formation in reversed-phase liquid-liquid chromatography with tri-n-octylphosphine oxide

Summary Reversed-phase liquid-liquid chromatographic systems consisting of an aqueous mobile phase and an organic liquid stationary phase of the proton acceptor tri-n-octylphosphine oxide (TOPO) inn-decane, coated on LiChrosorb RP-8, have been studied. The solutes were hydrophilic aromatic carboxylic acids and phenol. The retention of the carboxylic acids shows a minimum at 10 mM of TOPO, whereas increasingly tailing peaks have been obtained with decreasing concentrations of TOPO. This behaviour is due to a concurrent complex formation by hydrogen bonding with TOPO in the liquid stationary phase and adsorption at the interface between the support and the liquid stationary phase. The adsorption of TOPO, ketones and aromatic acids from hexane on Li-Chrosorb RP-8 has been studied, and seems to be due to residual silanol groups. The adsorption isotherm of TOPO has been determined and can be described by a two-site Langmuir adsorption model. Non polar solutes are not adsorbed. The influence of TOPO on the retention and the peak symmetry of carboxylic acids in the liquid-liquid chromatographic system appears to be due to a competition between TOPO and the acids for the same adsorption sites. No competition was found for phenol.Presented at the 14th International Symposium on Chromatography London, September, 1982     

3D H-bonding networks self-assembly from pyridinium derivatives and bis(maleonitriledithiolato)zincate(II)

The two ion-pair complexes, [pyH]₂[Zn(mnt)₂] (1) and [4,4′-bipyH₂]-[Zn(mnt)₂] (2), were synthesized, where mnt²⁻ denotes maleonitriledithiolate, and [pyH]⁺, [4,4′-bipyH₂]²⁺ represent pyridinium and diprotonated 4,4′-bipyridinium, respectively. Their single crystal structures show that there are strong bifurcated H-bonding interactions between the cations of the pyridinium derivative and the [Zn(mnt)₂]²⁻ anions in both 1 and 2. The bifurcated H-bonding interactions between the N–H of the pyridiniums and the CN groups of the mnt²⁻ ligands give rise to a 2D layered H-bonding network, the adjacent layers come together in such way as mutual embrace to give a tight pack, thus 2D hydrogen-bonding sheets further develop into 3D H-bonding networks through weak C–HS and ππ stacking interactions in 1. As for 2, the cations and anions connect into several types of H-bonding macrorings ([2+2], [3+3] and [4+4]), these H-bonding macrorings fuse to extend into 2D layered structure, the interpenetration between [3+3] and [4+4] type H-bonding macrorings in the adjacent layers give further rise to novel 3D extended H-bonding networks, in which there are clearly parallel stacks of cations and the chelate rings of anions.