Supercritical Propanol-Water Synthesis and Comprehensive Size Characterisation of Highly Crystalline anatase TiO2 Nanoparticles

Highly crystalline anatase TiO₂ nanoparticles have been synthesised in less than 1 min in a supercritical propanol-water mixture using a continuous flow reactor. The synthesis parameter space (T, P, concentration) has been explored and the average particle size can be accurately controlled within 10-18 nm with narrow size distributions (2-3 nm). At subcritical conditions amorphous products are obtained, whereas a broad range of T and P in the supercritical regime gives 11-14 nm particles. At high temperature and pressure, the particles size increase to 18 nm. The nanoparticles have been extensively characterised with powder X-ray diffraction (PXRD), transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) with excellent agreement on size and size distribution parameters. The SAXS analysis suggests disk-shaped particles with diameters that are approximately double the height. For comparison, a series of conventional autoclave sol-gel syntheses have been carried out. These also produce phase-pure anatase nanoparticles, but with much broader size distributions and at much longer synthesis times (hours). The study demonstrates that synthesis in supercritical fluids is a very promising method for manipulating the size and size distribution of nanoparticles, thus removing one of the key limitations in many applications of nanomaterials.     

Millettia ferruginea extract attenuates cisplatin-induced alterations in kidney functioning,DNA damage,oxidative stress,and renal tissue morphology

This study aimed to investigate the beneficial role of Millettia ferruginea extract (MF) in preventing cisplatin (Cisp) induced nephrotoxicity in rats. A total of 55 metabolites were identified using LC-MS analysis. The in vivo results indicated that MF pretreatment for 4 weeks (20 mg/kg b.w.) remarkably attenuated the altered renal biomarkers by decreasing the levels of plasma creatinine, urea, and uric acid when compared to the Cisp-group. The nephroprotective capacity of MF was further strengthened by histopathological observations, where Cisp + MF treated rats showed lower number of inflammatory cells and tubular degenerative changes than the Cisp-group. The harmful effects of cisplatin on renal oxidative stress indicators (MDA, SOD, CAT, and GPx), were restored by the treatment of MF. In addition, the reduction of inflammatory markers (IL-6 and TNF-α), associated with alleviating DNA fragmentation, highlighted the preventive effect of MF in kidney tissue. Additionally, MF components presented lower binding energies when docked into the active site of TNF-α and IL-6. The present findings concluded that M. ferruginea extract exhibited nephroprotective potential, which may be attributed to its antioxidant and anti-inflammatory properties. Further work is recommended to confirm the current results, explore the involved mechanism of action, and determine the therapeutic doses and time.     

Finite element investigation of the ground states of the helium trimers 4He3 and 4He2–3He

A three‐dimensional finite element method is applied to the ground states of the symmetric and asymmetric atomic helium trimers ⁴He₃ and ⁴He₂–³He. Three different He–He interaction potentials of hard‐core nature were studied. Two extrapolation procedures based on the convergence properties of the finite element method are investigated. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Multi‐stage high order semi‐Lagrangian schemes for incompressible flows in Cartesian geometries

Efficient transport algorithms are essential to the numerical resolution of incompressible fluid‐flow problems. Semi‐Lagrangian methods are widely used in grid based methods to achieve this aim. The accuracy of the interpolation strategy then determines the properties of the scheme. We introduce a simple multi‐stage procedure, which can easily be used to increase the order of accuracy of a code based on multilinear interpolations. This approach is an extension of a corrective algorithm introduced by Dupont & Liu (2003, 2007). This multi‐stage procedure can be easily implemented in existing parallel codes using a domain decomposition strategy, as the communication pattern is identical to that of the multilinear scheme. We show how a combination of a forward and backward error correction can provide a third‐order accurate scheme, thus significantly reducing diffusive effects while retaining a non‐dispersive leading error term. Copyright © 2016 John Wiley & Sons, Ltd.     

Determination of hydroxysafflor yellow A in biological fluids of patients with traumatic brain injury by UPLC‐ESI‐MS/MS after injection of Xuebijing

A simple, novel, specific, rapid and reproducible ultra‐performance liquid chromatography electrospray ionization tandem mass spectrometry method has been developed and validated for the determination of hydroxysafflor yellow A (HSYA) in biological fluids (plasma, urine and cerebrospinal fluid) of patients with traumatic brain injury after intravenous injection of Xuebijing (XBJ). Liquid–liquid extraction was performed, and separation was carried out on an Acquity UPLC? BEH C₁₈ column, with gradient elution using a mobile phase composed of methanol and 0.1% formic acid at a flow rate of 0.3 mL/min. A triple quadrupole tandem mass spectrometer with electrospray ionization was used for the detection of HSYA. The mass transition followed was m/z 611.0 → 491. The retention time was less than 3.0 min. The calibration curve was linear in the concentration range from 2 to 6125 ng/mL for cerebrospinal fluid, plasma and urine. The intra‐ and inter‐day precisions were <10%, and the relative standard deviation of recovery was <15% for HSYA in biological matrices. The method was successfully applied for the first time to quantify HSYA in the biological fluids (especially in cerebrospinal fluid) of patients with traumatic brain injury following intravenous administration of XBJ. Copyright © 2014 John Wiley & Sons, Ltd.     

Flow over rectangular porous block in a fixed width channel: influence of porosity and aspect ratio

Flow over a rectangular porous block placed in a fixed width channel is considered and the influence of block aspect ratio on the heat transfer rate from the block is examined. A non-porous solid block is also accommodated to compare the effect of porosity on the flow field and heat transfer characteristics. Aspect ratio and the porosity of the block are varied in the simulations. A numerical scheme employing a control volume approach is considered when predicting the flow and temperature fields. The Reynolds number is selected to yield the mix convection situation in the flow field. It is found that the aspect ratio significantly influences Nu and Gr numbers, in which case increasing the aspect ratio enhances Nu while lowering Gr. Increasing porosity improves the heat transfer rates from the porous block, provided that at high aspect ratios, this situation ceases due to blockage effect of the body in the channel.     

Reconstruction of n-dimensional convex bodies from surface tensors

In this paper, we derive uniqueness and stability results for surface tensors. Further, we develop two algorithms that reconstruct shape of n-dimensional convex bodies. One algorithm requires knowledge of a finite number of surface tensors, whereas the other algorithm is based on noisy measurements of a finite number of harmonic intrinsic volumes. The derived stability results ensure consistency of the two algorithms. Examples that illustrate the feasibility of the algorithms are presented.     

Validation of a novel very large eddy simulation method for simulation of turbulent separated flow

The paper describes the validation of a newly developed very LES (VLES) method for the simulation of turbulent separated flow. The new VLES method is a unified simulation approach that can change seamlessly from Reynolds‐averaged Navier–Stokes to DNS depending on the numerical resolution. Four complex test cases are selected to validate the performance of the new method, that is, the flow past a square cylinder at Re = 3000 confined in a channel (with a blockage ratio of 20%), the turbulent flow over a circular cylinder at Re = 3900 as well as Re = 140,000, and a turbulent backward‐facing step flow with a thick incoming boundary layer at Re = 40,000. The simulation results are compared with available experimental, LES, and detached eddy simulation‐type results. The new VLES model performs well overall, and the predictions are satisfactory compared with previous experimental and numerical results. It is observed that the new VLES method is quite efficient for the turbulent flow simulations; that is, good predictions can be obtained using a quite coarse mesh compared with the previous LES method. Discussions of the implementation of the present VLES modeling are also conducted on the basis of the simulations of turbulent channel flow up to high Reynolds number of Re_τ = 4000. The efficiency of the present VLES modeling is also observed in the channel flow simulation. From a practical point of view, this new method has considerable potential for more complex turbulent flow simulations at relative high Reynolds numbers. Copyright © 2013 John Wiley & Sons, Ltd.     

Identification,quantification and Chrastil modelling of wheat straw wax extraction using supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) can be used as a “green” selective solvent for extractions of wheat straw waxes. For the first time, the crude extraction yields of wheat straw waxes and the yields of a single high value group of components (wax esters) using various scCO₂ conditions (305.15 to 373.15 K and 7.5 to 40 MPa) have been modelled using the Chrastil equation (Chrastil, 1982). The model accurately predicts both the crude yield and percentage of valuable wax esters within the extracts enabling maximum extraction efficiency. The key compounds within the waxes (fatty acids, sterols, fatty alcohols, wax esters, β-diketones and alkanes) have been identified and quantified. This study highlighted that, 14,16 hentriacontanedione was extracted at critical temperature and pressure in concentrations of 1000 μg.g⁻¹ straw. This molecule could demonstrate significant potential as a natural chelate for metal recovery and also in the formation of super-hydrophobic coatings.