Two-Step Structure Phase Transition,Dielectric Anomalies,and Thermochromic Luminescence Behavior in a Direct Band Gap 2D Corrugated Layer Lead Chloride Hybrid of [(CH3)4N]4Pb3Cl10

A direct band gap 2D corrugated layer lead chloride hybrid, [(CH₃)₄N]₄Pb₃Cl₁₀ ( 1 ), shows analogous topology to the {Mg₃F₁₀⁴⁻}_∞ layer in Cs₄Mg₃F₁₀, and with the (CH₃)₄N⁺ cations locating in the inorganic layer voids and between the interlayers. Two reversible structural phase transitions occur in 1 at 225/210 K and 328/325 K upon heating/cooling, respectively. On going from the low- to intermediate-temperature phase, the space group changes from P2₁/c to Cmca, and the crystallographic axis perpendicular to the layers is doubled with the order–disorder transformation of (CH₃)₄N ⁺ cations between the interlayers. The intermediate- and high-temperature phases are isomorphic with similar cell parameters and packing structure; their main difference concerns the disorder degree of the (CH₃)₄N ⁺ cations between the interlayers. The two-step structural phase transitions lead to dielectric anomalies around the corresponding T_c. Interestingly, 1 shows multiband emission, originating from the recombination of exciton and emission of defects. Moreover, 1 exhibits divergent thermochromic luminescent features around the T_c on the intermediate to low temperature transition.     

An Interlaboratory Comparison of a Standardised EDTA Extraction Procedure for the Analysis of Available Trace Elements in Two Quality Control Soils

Abstract

A standardised EDTA extraction procedure was tested collaboratively by six laboratories using two in-house reference soils identified as soil A and soil B. The extracts were analysed for Zn, Cu, Pb and Mn by Inductively Coupled Plasma Spectrometry. Concentrations of extractable elements in soil A were generally much lower than those found in soil B. All laboratories produced some extreme outlying results, most of these were produced in soil B. Results for Mn were the most variable, with a range of 63.4–100.3 μg g^?1 in soil A and 226.4–415.3 μg g^?1 in soil B. In both soils, one laboratory reported high values for Zn and Mn and, one laboratory, for soil B, produced values for all four elements which were consistently low.

If outlying results are ignored, the results from most laboratories were in reasonable agreement for all elements except Mn.     

Simultaneous Determination of Arsenic and Lead in Vegetable Oil by Atomic Fluorescence Spectrometry after Vortex-Assisted Extraction

Hydride generation atomic fluorescence spectrometry (HG-AFS) is used for the determination of hydride-forming elements due to its high sensitivity, simplicity, and low cost. A new HG-AFS method for the simultaneous determination of arsenic and lead in vegetable oil is reported. Vortex-assisted extraction with dilute nitric acid was used to isolate arsenic and lead from vegetable oil. The conditions influencing the fluorescence signal, including the carrier fluid, oxidizing agent, and reducing agent, were optimized. The interferences of coexisting ions were also evaluated. Under the optimized conditions, the limits of detection were 0.6 and 0.4?µg?kg^?1 for arsenic and lead. The recoveries were from 84.4 to 105% for both metals in vegetable oil. The optimized method was used for the determination of arsenic and lead in commercial vegetable oil. The analytical results by this approach were in good agreement with values obtained by inductively coupled plasma mass spectrometry with microwave digestion.     

Improved solution for inventory model with defective goods

This paper is a consequence for a paper of Lin et al. [S.W. Lin, Y.W. Wou, P. Julian, Note on minimax distribution free procedure for integrated inventory model with defective goods and stochastic lead time demand, Appl. Math. Model. 35 (2011) 2087–2093]. We simplified their complicated solution procedure and then presented a revision to patch their negligence for the boundary minimums. Numerical examples are provided to demonstrate our findings.     

Unravelling the Time Scale of Conformational Plasticity and Allostery in Glycan Recognition by Human Galectin-1

The interaction of human galectin-1 with a variety of oligosaccharides, from di-(N-acetyllactosamine) to tetra-saccharides (blood B type-II antigen) has been scrutinized by using a combined approach of different NMR experiments, molecular dynamics (MD) simulations, and isothermal titration calorimetry. Ligand- and receptor-based NMR experiments assisted by computational methods allowed proposing three-dimensional structures for the different complexes, which explained the lack of enthalpy gain when increasing the chemical complexity of the glycan. Interestingly, and independently of the glycan ligand, the entropy term does not oppose the binding event, a rather unusual feature for protein-sugar interactions. CLEANEX-PM and relaxation dispersion experiments revealed that sugar binding affected residues far from the binding site and described significant changes in the dynamics of the protein. In particular, motions in the microsecond-millisecond timescale in residues at the protein dimer interface were identified in the presence of high affinity ligands. The dynamic process was further explored by extensive MD simulations, which provided additional support for the existence of allostery in glycan recognition by human galectin-1.     

Time‐dependent finite element simulations of a shear‐thinning viscoelastic fluid with application to blood flow

A new finite element method is developed to simulate time‐dependent viscoelastic shear‐thinning flows characterized by the generalized Oldroyd‐B model. The focus of the algorithm is improved stability through a free‐energy dissipative scheme by using low‐order piecewise‐constant finite element approximations for stress. The algorithm is further modified by incorporating a pressure‐projection method, a DG‐upwinding scheme, a symmetric interior penalty DG method to solve the elliptic pressure‐update equation and a geometric multigrid preconditioner. The improved stability and cost to accuracy is compared when using higher order discontinuous bilinear approximation, where in addition, we consider the influence of a slope limiter for these elements. The algorithm is applied to the 2D start‐up‐driven cavity problem, and the stability of the free energy is illustrated and compared between element choices. An application of the model to modelling blood in small arterioles and channels is considered by simulating pulsatile blood flow through a stenotic arteriole. The individual influences of viscoelasticity and shear‐thinning within the generalized Oldroyd‐B model are investigated by comparing results to the Newtonian, generalized Newtonian and Oldroyd‐B models. Copyright © 2014 John Wiley & Sons, Ltd.     

The impact of blood on liver metabolite profiling – a combined metabolomic and proteomic approach

Metabolomics has entered the well‐established omic sciences as it is an indispensable information resource to achieve a global picture of biological systems. The aim of the present study was to estimate the influence of blood removal from mice liver as part of sample preparation for metabolomic and proteomic studies. For this purpose, perfused mice liver tissue (i.e. with blood removed) and unperfused mice liver tissue (i.e. containing blood) were compared by two‐dimensional gas chromatography time of flight mass spectrometry (GC × GC‐TOFMS) for the metabolomic part, and by liquid chromatography tandem mass spectrometry (LC‐MS/MS) for the proteomic part. Our data showed significant differences between the unperfused and perfused liver tissue samples. Furthermore, we also observed an overlap of blood and tissue metabolite profiles in our data, suggesting that the perfusion of liver tissue prior to analysis is beneficial for an accurate metabolic profile of this organ. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication of a Nitrate Selective Electrode for Determination of Nitrate in Fertilizers by Using Flow Injection Analysis System

A nitrate ion selective electrode (nitrate-ISE) based on pyrrole modification on a common pencil lead was proposed. The lab-made nitrate-ISE was easily constructed by pyrrole polymerization with nitrate ion as the dopant using cyclic voltammetry. The fabricated nitrate-ISE was then coupled with flow injection analysis (FIA) for an automatic system. The flow potentiometry provided working range of 1x10^-4 to 4x10^-3 mol L^-1 of nitrate and allowed sample throughput up to 50 samples h^-1. Linear regression analysis showed good agreement (r²=0.9961) with Nernstian response. This system was applied to determine nitrate-nitrogen (nitrate-N) in fertilizer samples.     

不同抗凝比例对凝血四项检测结果的影响

目的观察并分析凝血四项检测结果与不同比例下的全血与抗凝剂之间的关系。方法研究对象取2015年6月来湖北省宜昌市第二人民医院参加体检的110例健康人员,抽取全血血液样本后按照不同比例与抗凝剂混匀,常规分离血浆并测定受试者凝血酶时间(TT)、凝血酶原时间(PT)、激活部分促凝血酶原激酶时间(APTT)以及纤维蛋白原(FIB),并对研究结果相关数据作统计学处理。结果当血液量与抗凝剂比例为1∶5时,标本TT、PT、APTT以及FIB各项指标较1∶9时差异显著而具有统计学意义(P0.05);抗凝比例1∶7的情况下,TT指标差异与1∶9抗凝比例标本相比差异具有统计学意义(P0.05),而PT、FIB以及APTT三项指标差异并无统计学意义(P0.05);抗凝比例为1∶11与1∶13的情况下,TT指标与1∶9抗凝比例标本相比差异具有统计学意义(P0.05),而PT、FIB以及APTT三项指标差异并无统计学意义(P0.05)。结论凝血四项检测工作中,标本质量检测控制最关键的环节在于准确采集血液量,倘若采集血量过多或过少,导致与抗凝剂比例失调往往会影响测定结果准确性,检验科工作人员应予以重视。