Artifacts in the Determination of Trace Metal Binding Forms in Anoxic Sediments by Sequential Extraction

Abstract

The binding forms of Co, Cd, Cu, Pb, and Zn in an anoxic, sulfide-bearing sediment were investigated by performing both thermodynamic equilibrium calculations and sequential extractions. Care was taken to maintain oxygen-free conditions during the whole experiment. The calculations suggested that trace metals were bound to sulfidic minerals. Sequential extraction results, however, showed increased importance of exchangeable and reducible fractions in the order Cu < Cd < Pb < Zn < Co. Thermodynamic equilibrium calculations of the chemical reactions during extraction showed that Cd, Co, Pb, and Zn sulfides are to a significant extent soluble in the acetate-exchangeable (step 1 + 2) and oxalate-reducible (step 3) fractions. Neglecting the dissolution of sulfide minerals would lead to a misinterpretation of the experimental results.     

Trifluoroethylxanthate as an Analytical Reagent: AAS of Zinc,Antimony and Lead After Coprecipitation of Their Trifluoroethylxanthates onto Microcyrstalline Naphthalene

Abstract

A sensitive method has been developed for the direct atomic absorption spectrometric determination of zinc, antimony and lead after coprecipitation of their trifluoroethylxanthates onto microcrystalline naphthalene. The metal xanthates are quantitatively coprecipitated over the pH ranges: Zn, 5.9–8.4; Sb, 4.0–6.0 and Pb, 4.0–11.0. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF. This solution is aspirated into an air-acetylene flame at 213.9, 217.6 and 217.0nm for Zn, Sb and Pb, respectively. Beer's law is obeyed in the concentration range 2–50, 3–90 and 5–60 μg of Zn, Sb and Pb, respectively in 10ml of the final DMF solution. RSDs are at the ± (0.5–0.6)% level (n=10). The concentration for 1% absorption is 0.019, 0.035 and 0.060μg/ml for Zn, Sb and Pb, respectively. The method is suitable for the preconcentration of the metals from a larger volume of the aqueous phase, and has been employed for their determination in standard reference materials. It may be employed for the simultaneous determination of Zn, Pb and Sb in a solution by pH control.     

Radioimmunoassay of PCBs in Milk and Blood

A radioimmunoassay was developed capable of determining Aroclor 1260 in milk at levels of from 20 to 80 ppb and in blood from 2 to 16 ppb. The values obtained by radioimmunoassay correlate well with those determined by gas-liquid chromatography (r² = 0.96 for milk and 0.99 for blood) but were lower. Antiserum was produced in rabbits and was specific for 2, 2′, 4, 4′, 5, 5′-hexachlorobiphenyl. It cross-reacted with congeners and isomers in Aroclor 1254 and 1260 to the extent that a 20% decrease in binding was observed with 0.1 ng of either mixture. The method requires preliminary cleanup of the extract on alumina and utilizes 25 % dimethyl sulfoxide in the assay medium to promote solubilization of the substrates.     

基于支持向量机的凝血功能诊断模型

使用凝血四项指标诊断凝血功能是临床的常规检查,但根据经验进行诊断正确率不高.剔除临床上最重要的指标FIB后,建立支持向量机模型诊断的正确率和根据凝血四项指标诊断的正确率没有显著差异,100次模拟的平均正确率分别达到了95.4496%和95.5039%.     

A novel fast method for aqueous derivatization of THC,OH‐THC and THC‐COOH in human whole blood and urine samples for routine forensic analyses

A novel aqueous in situ derivatization procedure with propyl chloroformate (PCF) for the simultaneous, quantitative analysis of Δ⁹‐tetrahydrocannabinol (THC), 11‐hydroxy‐Δ⁹‐tetrahydrocannabinol (OH‐THC) and 11‐nor‐Δ⁹‐tetrahydrocannabinol‐carboxylic acid (THC‐COOH) in human blood and urine is proposed. Unlike current methods based on the silylating agent [N,O‐bis(trimethylsilyl)trifluoroacetamide] added in an anhydrous environment, this new proposed method allows the addition of the derivatizing agent (propyl chloroformate, PCF) directly to the deproteinized blood and recovery of the derivatives by liquid–liquid extraction. This novel method can be also used for hydrolyzed urine samples. It is faster than the traditional method involving a derivatization with trimethyloxonium tetrafluoroborate. The analytes are separated, detected and quantified by gas chromatography–mass spectrometry in selected ion monitoring mode (SIM). The method was validated in terms of selectivity, capacity of identification, limits of detection (LOD) and quantification (LOQ), carryover, linearity, intra‐assay precision, inter‐assay precision and accuracy. The LOD and LOQ in hydrolyzed urine were 0.5 and 1.3 ng/mL for THC and 1.2 and 2.6 ng/mL for THC‐COOH, respectively. In blood, the LOD and LOQ were 0.2 and 0.5 ng/mL for THC, 0.2 and 0.6 ng/mL for OH‐THC, and 0.9 and 2.4 ng/mL for THC‐COOH, respectively. This method was applied to 35 urine samples and 50 blood samples resulting to be equivalent to the previously used ones with the advantage of a simpler method and faster sample processing time. We believe that this method will be a more convenient option for the routine analysis of cannabinoids in toxicological and forensic laboratories.     

Effect of corona discharge on cadmium sulphide and lead sulphide films

This paper describes the effect of corona discharge on cadmium sulphide (CdS) and lead sulphide (PbS) films prepared using the chemical route. The property of films before and after exposure to corona has been described in detail. The electronic properties of the CdS and PbS films have been studied by current-voltage (I-V), capacitance-voltage (C-V) measurements. The structural properties and surface morphology were studied by using X-ray diffraction and scanning electron microscopy before and after exposing to Corona discharge. The films displayed the change in surface morphology after exposure to the corona discharge. It has been found that the films showed an increase in resistivity after exposure. This change in property has been attributed to modification in surface states. Time-dependent recovery indicated that room temperature annealing is sufficient to regain the normal resistivity of the films. The experiment was carried with the aim of studying the effect of the interaction of corona discharge on the semiconductor films and its subsequent effects.     

Application of FTIR Spectroscopy for Identification of Blood and Leukemia Biomarkers: A Review over the Past 15 Years

Abstract

Fourier transform infrared (FTIR) spectroscopy is an effective and nondestructive method for monitoring cellular alterations. Combining the advantages of FTIR spectroscopy with the challenge of cellular characterization, the main objective of this review is to collect information related to the spectroscopic identification of blood cells, focusing on specific biochemical features of leukemia cells detected through FTIR spectral analysis. Some interesting results obtained by different authors regarding human promyelocytic leukemia, white blood cells, chronic lymphocytic leukemia, and human peripheral blood mononuclear cells are presented. In addition, the characterization of two types of cells, namely, leukemia T and a healthy human blood cells, is reported and the identification of biochemical markers provides important information that, associated with clinical examination, can assist in the diagnosis of diseases.     

Extremely Photostable Electron-Deficient Phthalocyanines that Generate High Levels of Singlet Oxygen

A robust lead-mediated synthetic procedure for the generation of phthalocyanines substituted with electron-withdrawing groups has been developed. The free-base phthalocyanine and various metal complexes were prepared without discernible degradation of the peripheral electron-withdrawing substituents. Upon irradiation with red light, some of the thus-obtained metal complexes generated high levels of singlet oxygen. In particular, a palladium complex exhibited attractive photostability upon exposure to singlet oxygen as a bleaching agent. The photostability of such complexes that may manifest concomitantly to the generation of high levels of singlet oxygen was attributed to the presence of the electron-withdrawing groups, which results in energetically low-lying highest occupied molecular orbitals.     

Analysis of carbenoxolone by ultra‐high‐performance liquid chromatography tandem mass spectrometry in mouse brain and blood after systemic administration

Carbenoxolone is a derivative of glycyrrhetinic acid found in the root of Glycyrrhiza glabra, colloquially known as licorice. It has been used as a treatment for peptic and oral ulcers. In recent years, carbenoxolone has been utilized in basic research for its ability to block gap junctional communication. Better understanding the distribution of carbenoxolone after systemic administration can lead to a better understanding of its potential sites of action. Presented is an ultra high‐performance liquid chromatography tandem mass spectrometer (UHPLC–MS/MS) method for the identification and quantification of carbenoxolone in mouse blood and brain tissue. Twenty mice were injected intraperitoneally with 25 mg/kg carbenoxolone and brain tissue and blood were collected for analysis. Blood concentrations (mean ± SD) at 15, 30, 60 and 120 min were determined to be (n = 5) 5394 ± 778, 2636 ± 836, 1564 ± 541 and 846 ± 252 ng/mL, respectively. Brain concentrations (mean ± SD) at 15, 30, 60 and 120 mins were determined to be (n = 5) 171 ± 62, 102 ± 35, 55 ± 10 and 27 ± 9 ng/g, respectively. The analysis of these specimens at the four different time points resulted in blood and brain half‐lives in mice of ~43 and 41 min, respectively. The UHPLC–MS/MS method was determined to be sensitive and robust for quantification of carbenoxolone.