两亲性嵌段聚合物的同步辐射小角x射线散射研究

应用同步辐射小角x射线散射(SAXS)方法研究了不同聚合条件下苯乙烯对乙烯基苯甲酸两亲性嵌段聚合物的聚集行为,结果发现该聚合物在选择性溶液中自组装形成胶束.胶束的形态和结构取决于嵌段聚合物的组成、浓度以及溶剂的性质等因素 关键词： 小角x射线散射 两亲性嵌段聚合物 分形维数 粒径     

A polar macroporous sorbent for gas chromatography

Summary The gas chromatographic behaviour of crosslinked macroporous 2-hydroxyethyl methacrylate grafted with 2-methyloxazoline was investigated and the range of applicability of the copolymer was assessed. Retention index values were measured on this copolymer and compared with those obtained on the terpolymer 2-hydroxyethyl methacrylate-ethylene dimethacrylate-acrylonitrile. Rohrschneider constants and efficiency data for selected sorbates are given. The use of this type of polymer in the separation of various types of compounds is documented by various examples.     

Latex particles bearing hydrophilic grafted hairs with controlled chain length and functionality synthesized by reversible addition–fragmentation chain transfer

A method is described for synthesizing latex particles with anchored hairs by the grafting of hydrophilic chains, synthesized by reversible addition–fragmentation chain transfer, onto functionalized latex particles. These have the potential to bind biologically active species. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1188–1195, 2003     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Upper and lower bounds for the energy of bipartite graphs

Using Lagrange's multiplier rule, we find upper and lower bounds of the energy of a bipartite graph G, in terms of the number of vertices, edges and the spectral moment of fourth order. Moreover, the upper bound is attained in a graph G if and only if G is the graph of a symmetric balanced incomplete block design (BIBD). Also, we determine the graphs for which the lower bound is sharp.     

混合效应模型中的D-最优设计

本研究的是混合效应-Ⅱ模型，首先，给出二阶模型存在D-最优回归设计点的必要条件。其次，组合D-最优回归设计和D-最优区组设计BIBD构造D-最优设计并给出寻找新的D-最优设计点的方法。以两种有代表性的组合误差分布为例，阐明新的D-最优设计点的获得过程，并给出了数值结果。     

Synthesis and characterization of guar gum‐graft‐polyacrylonitrile

Cerium(IV) mediated grafting of polyacrylonitrile on to guar gum was studied. Grafting parameters were studied gravimetrically, as a function of temperature, initiator concentration and Guar to acrylonitrile ratio. Higher temperatures resulted in higher monomer conversion and homopolymer formation. Both monomer conversion and extent of grafting increased with increase in cerium ion concentration in the range studied (0.91–9.12 mmol/l). Similar results were obtained with increase in monomer to guar gum ratio from 1 to 5. Grafting with this initiator was found to be generally good with high grafting efficiencies and low homopolymer formation for most experiments. The copolymers obtained were subjected to alkaline hydrolysis to convert nitrile groups in to carboxylic acid groups and the water absorbency of the resulting anionic guar gum was studied. Materials with water absorption up to 300 g/g could be obtained from this study. Copyright © 2003 John Wiley & Sons, Ltd.     

Deformation of styrene—divinylbenzene copolymers and hypercrosslinked polystyrenes during solvent adsorption and desorption

An automated procedure was developed for monitoring fast changes in the size of spherical samples of polymers during their contact with a solvent or drying. The kinetics of bulk deformation in these processes was studied for a series of cross-linked polymers, viz., gel-type and porous styrene—divinylbenzene copolymers and poly(divinylbenzenes), and hypercrosslinked polystyrenes. Gel, macroporous, and hypercrosslinked polystyrenes are substantially different in the rate, mechanism, and degree of swelling, which is associated with the principal differences in their physical structures. An unusual effect of a sharp decrease followed by a temporary increase in the volume of porous polystyrene and poly(divinylbenzene) materials were observed during desorption (evaporation) of organic solvents. Water desorption is accompanied by an excessive bulk compression of porous granules giving rise to negative deformations, which gradually relax to the state equilibrium for the dry polymer. The results of dynamic desorption porometry (for water desorption) are indicative of a bimodal size distribution of micropores in hypercrosslinked polystyrene. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–476, March, 2007.     

Physicochemical studies on hydrophobic PEO‐PPO‐PEO triblock copolymer micelles in SDS micellar environment

The shape, size, aggregation, hydration, and correlation times of water insoluble PEO‐PPO‐PEO triblock copolymer micelles with sodium dodecylsulfate (SDS) micelles were investigated using transport studies and dynamic light scattering technique. From the conductance of micellar solutions of the polymer in 25 mM SDS and 5 mM NaCl, the hydration of polymer micelles were determined using the principle of obstruction of electrolyte migration by the polymer. The asymmetry of the micellar particles of polymer and polymer‐SDS mixed micellar systems in 5 mM NaCl and their average axial ratios were calculated using intrinsic viscosity and hydration data obeying Simha–Einstein equation. Hydration number and micellar sizes were variable with temperature. The shape of the polymer micelles has been ellipsoidal rather than spherical. The micellar volume, hydrodynamic radius, radius of gyration, diffusional coefficients as well as translational, rotational and effective correlation times have been calculated from the absolute values of the axes. The partial molal volume of polymer micelles has also been determined and its comparison with the molar volume of pure polymer suggested a volume contraction due to immobilization of the water phase by the hydrophilic head groups of the polymer. The thermodynamic activation parameters for viscous flow favor a more ordered water structure around polymer micelles at higher temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2410–2420, 2007     

Cyclic reduction and FACR methods for piecewise hermite bicubic orthogonal spline collocation

Cyclic reduction and Fourier analysis-cyclic reduction (FACR) methods are presented for the solution of the linear systems which arise when orthogonal spline collocation with piecewise Hermite bicubics is applied to boundary value problems for certain separable partial differential equations on a rectangle. On anN×N uniform partition, the cyclic reduction and Fourier analysis-cyclic reduction methods requireO(N ²log₂ N) andO(N ²log₂log₂ N) arithmetic operations, respectively.