CHARACTERIZATION OF MELT-MIXED POLY(ETHYLENE-2,6-NAPHTHALATE) (PEN)/POLYCARBONATE (PC) BLENDS

ABSTRACT

Melt blending of poly(ethylene naphthalate) (PEN) and bisphenol A polycarbonate (PC) was performed without the addition of catalyst in a batch mixer at 290°C at various compositions. All the blends prepared exhibited a biphasic character and had very good mechanical properties, in some cases, even better than those of the respective pure constituents. This behavior was attributed to a copolymer formation in the mesophase, which effectively compatibilizes the system. The formation of a PEN/PC block copolymer was considered to be due to transesterification reactions between PEN and PC and was verified by extraction experiments and examination of the soluble and insoluble fractions by various spectroscopic techniques.     

聚甲基乙撑碳酸酯/天然高分子复合材料研究进展

聚甲基乙撑碳酸酯(PPC)是一种新型热塑性脂肪族聚碳酸酯,具有良好的生物降解性、高阻隔性和生物相容性等优点,但其热性能和力学性能较差,通过物理和化学方法改性是提高其性能的重要研究方向之一。本文综述了近年来采用淀粉、纤维素和甲壳素等天然高分子对PPC的改性研究,尤其是天然高分子含量和预处理方法等对复合材料性能的影响,并对PPC/天然高分子复合材料的发展作了总结和展望。     

Selection of hydrogel electrolytes for flexible zinc–air batteries

Flexible zinc–air batteries attract more attention due to their high energy density, safety, environmental protection, and low cost. However, the traditional aqueous electrolyte has the disadvantages of leakage and water evaporation, which cannot meet application demand of flexible zinc–air batteries. Hydrogels possessing good conductivity and mechanical properties become a candidate as the electrolytes of flexible zinc–air batteries. In this work, advances in aspects of conductivity, mechanical toughness, environmental adaptability, and interfacial compatibility of hydrogel electrolytes for flexible zinc–air batteries are investigated. First, the additives to improve conductivity of hydrogel electrolytes are summarized. Second, the measures to enhance the mechanical properties of hydrogels are taken by way of structure optimization and composition modification. Third, the environmental adaptability of hydrogel electrolytes is listed in terms of temperature, humidity, and air composition. Fourth, the compatibility of electrolyte–electrode interface is discussed from physical properties of hydrogels. Finally, the prospect for development and application of hydrogels is put forward.     

Incorporation of Lysine-Containing Copolymer with Polyurethane Affording Biomaterial with Specific Adsorption of Plasminogen

A novel biomaterial based on polyurethane (PU) was prepared through physical incorporation of lysine-containing copolymer to improve its hemocompatibility and surface recognition of plasminogen.The lysine-containing copolymer was synthesized via the copolymerization of 2-ethylhexyl methacrylate (EHMA),oligo (ethylene glycol)methyl ether methacrylate (OEGMA) and 6-tert-butoxycarbonyl amino-2-(2-methyl-acryloylamino)-hexanoic acid tert-butyl ester (Lys(P)MA),followed by the deprotection of COOH and ε-NH2 groups on lysine residues in the copolymer.The composition of the copolymer can be adjusted by varying the monomer feed ratio.The three components contribute to improving the compatibility with PU,resistance to nonspecific protein adsorption and specific binding of plasminogen,respectively.The binding capacity towards plasminogen increased with the lysine content in the copolymer.This approach illustrates a simple way for the generation of novel biomaterials with improved hemocompatibility and surface recognition of specific biomolecules.     

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)~PLA copolymer (PU ~ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.     

Synthesis of two A-B-C type conjugated amphiphilic triblock fullerene derivatives and their application in organic solar cells

Two A-B-C type conjugated amphiphilic triblock fullerene derivatives C60-2 HMTPB and C60-2 EHTPB were obtained in multi steps synthesis with three different blocks,and the amphiphilic diblock molecular C60-4 TPB was also preferred as a reference.When as modifying layer on zinc oxide(ZnO),the three fullerene derivatives can all reduce the work function of ZnO via modulation of the interfacial dipoles and lead a better electrical coupling.As introducing treatment of toluene,the obvious self-assembly of fullerene derivatives were observed,which were supported by X-ray diffraction and contact angle of water measurement.Base on PTB7-Th:PC71 BM system,the inverted organic solar cells devices with structure of ITO/ZnO/fullerene derivatives/PTB7-Th:PC71BM/Mo03/Al got power conversion efficiencies of 8.62%,8.83%and 9.00%for C60-4 TPB,C60-2 HMTPB and C60-2 EHTPB,respectively,compared 8.13%of devices with bare ZnO.The result of conjugated amphiphilic triblock fullerene derivatives provides a straightforward approaching by simultaneously modulating the morphology and interfacial work function of ZnO,which can also lead high performance in optoelectronic devices.     

Direct diazotization of graphite nanoplatelets with melamine and their favorable application in epoxy resins

The ease of undesirable agglomeration and a low efficiency are two problems that restrict the application of graphite nanoplatelets (GNPs) in epoxy resins (EP). Herein, a new strategy with melamine (MEL) as the precursor to functionalize GNPs chemically, which form a bonding layer that is compatible with epoxy matrix, is reported. The MEL fragments with secondary amine groups were grafted uniformly on the GNPs surface by covalent junctions to exploit the diazonium chemistry. This behavior led to a better dispersion and a stronger interaction with the epoxy matrix and resulted in an enhanced glass transition temperature and bending strength, compared with the pure EP. When only 1 wt% functionalized GNPs (f‐GNPs) was used, the Tg of the modified EP raised of about 15°C compared with pure EP, and the bending strength increased by approximately 39%. The dielectric constant of the EP with f‐GNPs was impacted slightly, and the dielectric loss decreased. At 10⁵ Hz, the dielectric loss of the EP with 1 wt% f‐GNPs decreased by approximately 11% compared with pure EP. Therefore, diazotization modification of the GNPs is a useful approach to improve the compatibility in nanoparticle networks.     

Compatibility and fungal degradation of poly[(R)-3-hydroxybutyrate]/aliphatic copolyester blend

Poly[(R)-3-hydroxybutyrate] (PHB) was blended with an aliphatic copolyester, which was synthesized by the esterification of adipic acid, ethylene glycol, and lactic acid. The blend showed a single T_g, which varied systematically but convexly upwards with the composition. The growth rate of PHB spherulites, the crystallization temperature, and the equilibrium melting temperature of the blend were decreased as the amount of the copolyester was increased. Therefore, the blend system was determined to be compatible. However, the degree of crystallinity, and the enthalpies of crystallization and fusion of PHB in the blend remained almost constant, regardless of the compositional change, although the crystallization rate was decreased upon blending. No chemical change such as transesterification was observed as a result of the blending, yet there was a slight change in the crystalline morphology of PHB. The rate of fungal degradation was lowered with an increase in the copolyester content of the blend. © 1996 John Wiley & Sons, Inc.     

Study on the Dynamics of Blending of Glucomannan with Carrageenan and Guaran Gum

In order to prove up the interaction between konjac glucomannan (KGM) and other amyloses, by using KGM, guaran gum and carrageenan as materials, their blending in different external conditions was modeled by means of molecular dynamics (MD) method. The result showed that 323 K was a significant turning point for the formation of hydrogen bond, and KGM and guaran gum were just juxtaposed together via intermolecular hydrogen bond; but with the addition of carrageenan, KGM, guaran gum and carrageenan were spirally twisted together, and when their blending proportion is 3:2:9 the combination was the most compact. Moreover, the research result has provided the sequent studies afterwards on amyloses with some references.     

PP-g-(St-co-MMA)/PP/PVC共混物相容性研究

利用扫描电子显微镜(SEM)和X射线能谱仪(EDS)对聚丙烯／聚氯乙烯(PP80／PVC20)二元体系,以及聚丙烯多单体接枝物[PP-g-(St-co-MMA)]／PP／PVC三元体系的相容性进行了研究。由X射线能谱微区分析得到了共混物中氯元素面分布图。对氯元素面分布进行了粒径分布统计和面积计算。实验结果表明：在PP80／PVC20共混物100份中加入6份PP-g-(St-co-MMA)增容剂时,增容效果最好;进一步增加PP-g-(St-co-MMA)含量时,PP／PVC的相容性反而降低。差示扫描量热仪(DSC)的实验结果也佐证了SEM和EDS的实验结果。