半化学法制备Pb(Fe2/3W1/3)O3陶瓷粉体的反应机理

铅系弛豫铁电陶瓷钨铁酸铅Pb(Fe2/3W1/3)O3(PFW)是一种重要的介电材料,具有较大的介电常数(8000)和较低的烧结温度(小于900℃),适用于制备低烧高介的多层陶瓷电容器犤1～4犦。在传统氧化物法合成PFW的过程中,易生成恶化介电性能的钨酸铅(PbWO4或Pb2WO5)或焦绿石相(Pb2FeWO6)等其他相犤3,4犦。尽管通过加入过量5%的Fe2O3可以消除这些其他相,但因含较多的变价铁离子(Fe3+和Fe2+)而产生介电老化的缺点犤5犦。虽然二次合成法被广泛用于制备铅系弛豫铁电陶瓷犤6犦,但对制备PFW陶瓷的效果并不明显,仍有少量的钨酸铅PbWO4存在,并且预烧…     

Seeding and the Non-Hydrolytic Sol-Gel Synthesis of ZrW2O8 and ZrMo2O8

The unseeded non-hydrolytic sol-gel synthesis of ZrW₂O₈ and ZrMo₂O₈ produces trigonal ZrM₂O₈ (M = W, Mo) at 740 and 300–400°C, respectively. Cubic ZrW₂O₈ can be prepared using non-hydrolytic sol-gel methods by seeding with small amounts of preprepared cubic material, and the formation of the trigonal polymorph can be suppressed completely. Seeds with a small particle size are necessary for the preparation of cubic ZrW₂O₈. In contrast, seeding of ZrMo₂O₈ gels with either cubic ZrMo₂O₈ or cubic ZrW₂O₈ only lowers the temperature at which the trigonal phase crystallizes.     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

Einfache Trithio- und Perthiocarbonatokomplexe mit interessanter Koordinationschemie: [E(CS3)2]2− (E = Sn,Zn, Cd), [E(CS3)3]3− (E = As,Sb, Bi,Co), {Cu(CS3)−}∞ und [Zn(CS4)2]2−

Simple Trithio- and Perthiocarbonato Complexes with Interesting Bond Properties: [E(CS₃)₂]^2? (E = Sn, Zn, Cd), [E(CS₃)₃]^3? (E = As, Sb, Bi, Co), {Cu(CS₃)^?}_∞ and [Zn(CS₄)₂]^2? By reactions of potassium trithiocarbonate ( 1 ) with solutions of zinc(II)- acetylacetonate, cadmium(II)-chloride, tin(II)-chloride, arsenic(III)-sulfide (suspension), antimony(III)-chloride, bismuth(III)-chloride and copper(II)-chloride in dimethyl sulfoxide, as well as of trisodium hexanitrito cobaltate(III) in water, and the precipitation of the complexes with an aqueous solution of tetraphenylphosphonium chloride the compounds (PPh₄)₂[Zn(CS₃)₂] ( 2 ), (PPh₄)₂[Cd(CS₃)₂] ( 3 ), (PPh₄)₂[Sn(CS₃)₂] ( 4 ), (PPh₄)₃[As(CS₃)₃] ( 5 ), (PPh₄)₃[Sb(CS₃)₃] ( 6 ), (PPh₄)₃[Bi(CS₃)₃] ( 7 ), (PPh₄)₃[Co(CS₃)₃] ( 8 ) and (PPh₄)Cu(CS₃) ( 9 ) have been isolated. (PPh₄)₂[Zn(CS₄)₂] · CH₃NO₂ ( 10 ) has been prepared by heating a solution of 2 in nitromethane to 60--70°C in presence of air. The reaction of 1 in dimethyl sulfoxide with an aqueous tetraphenylphosphonium chloride solution in presence of oxygen leads to (PPh₄)₂[C₂S₆] ( 11 ). The compounds have been characterized by spectroscopical studies (IR, Raman, UV/Vis, ¹¹³Cd/⁵⁹Co-NMR), magnetic susceptibility measurements, powder diffractometry, elemental analyses and single crystal X-ray structure analysis ( 4 – 7 , 10 and 11 ). The difficult growing of single crystals has been reported in detail. For crystal data see Inhaltsübersicht.     

Formation of Bi-Sb, Bi-Sn, and Bi-Sb-Sn Nanoclusters in Silica Xerogel Matrices from Mixed-Metal Oxide Precursors

Homogeneous mixed-metal oxides of the general formula (Bi/E/Si)O _x , where E represents a dopant element (E=Sb, Sn, or Sb/Sn), can be prepared using typical sol-gel processing techniques. Reduction of the in-situ Bi(III) and E ions by hydrogen affords nanocomposites of Bi-Sb, Bi-Sn, or Bi-Sb-Sn widely dispersed throughout the silica xerogel matrix. The materials prepared have high Bi-E metal loading of 52–60 wt. % containing Bi-E alloy nanoclusters of 12–15 nm average diameter. These results demonstrate a convenient method for the production of practical quantities of nanostructured bismuth alloy ceramic composites at high metal content.     

Chemistry of polyfunctional molecules-123. Reactions of BiBr3, SbI3 and AsI3 with LiN(PPh2)2; X-ray structure of a cyclophosphazene salt containing arsenic(I)

BiBr₃ or SbI₃ react at 20°C with LiN(PPh₂)₂ (1) to give elementary Bi or Sb and the P---P coupled phosphazene ligand Ph₂P---N=PPh₂---PPh₂=N---PPh₂ (2). The reaction of AsI₃ with 1 at room temperature formed yellow needles of the eight-membered heterocycle (3), whereas AsI₃ interacted at 80°C with 1 in the molar ratio of 1:3 to give elementary arsenic and 2. Treatment of AsI₃ and 1 at 20°C in a 1:2 stoichiometry yielded the seven-membered, cyclic arsenium(I) salt

Full-size image

I·4THF (5·4THF), which was characterized by elemental analysis, conductivity, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis.     

Sm~(3 )在硼酸盐玻璃中的发光及Bi~(3 )对Sm~(3 )的敏化作用

早在六十年代,人们为了寻找较好的激光玻璃,曾对Sm~(3 )离子掺杂的玻璃中的光谱进行过研究。为了探寻新型的激光,发光玻璃,又进一步研究了Sm~(3 )在玻璃中的发光和敏化。我们以寻找一种高亮度,低成本的发光玻璃为目的,研究了基质玻璃组成,敏化离子及其浓度对Sm~(3 )发光性质的影响。 选择B_2O_3-BaO-M_mO_n(M_mO_n=Li_2O,Na_2O,K_2O,MgO,CaO,SrO)玻璃体系,所用原料的纯度皆为分析纯以上,用陶瓷坩埚在1250℃掺杂氧化钐(纯度均大于99％),玻璃的荧光谱和激发光谱,用MPF-4型荧光分光光度计测定。     

12-钨磷酸希土盐DMF、DMSO加合物的合成、性质及其热分解动力学常数研究

合成了8种钨磷酸希土盐LnPW₁₂O₄₀·xH₂O(Ln=Y、La、Nd、Sm、Gd、Dy、Ho、Yb)的DMF、DMSO加合物,对加合物进行了组成分析,通过IR光谱、TG-DTA曲线对加合物进行了性质表征,并着重研究了加合物热分解过程的动力学,给出了热分解反应级数n和活化能E.     

Application of thermal analysis to study of the synthesis of K0.5Bi0.5Tio3 ferroelectric

Synthesis of potassium bismuth titanate ferroelectric by heating of mixtures prepared using oxide precursors, i.e. Bi₂O₃, TiO₂ and K₂CO₃ was investigated. DTA, TG, XRD and SEM methods were used to study the formation of intermediate compounds and the final product. Usage of associated homogenization and grinding of precursors mixture permits to decrease the temperature of formation of K_0.5Bi_0.5TiO₃. This revised version was published online in July 2006 with corrections to the Cover Date.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。