5'-O-(2-Isopropoxyprop-2-yl)-protected Phosphoramidite Building Blocks in the Liquid Phase Oligonucleotide Synthesis

5'-O-(2-isopropoxyprop-2-yl) (IIP)-protection was introduced to 5’-OH function of nucleosides in high yields by an acid-catalysed transacetalization with 2,2-diisopropoxypropane. The applicability of this temporal 5’-O-protecting group was demonstrated in the liquid phase oligonucleotide synthesis (LPOS) using the corresponding phosphoramidite building blocks (dA, dG, dC and dT) and a tetrapodal precipitative soluble support. Standard protecting groups were used on nucleobases. Tetrazole as an activator, followed by oxidation using m-chloroperbenzoic acid, was used for the coupling. The IIP was shown to be a capable choice to the 5’-O protection in solution phase synthesis. It could be readily removed with formic acid (t_1/2<10 s in 6 % HCOOH in dichloromethane/methanol (2/1) at RT), resulting in volatile byproducts (acetone and isopropanol).     

Reaction of the levoglucosenone Diels–Alder adducts with acetaldehyde under the McMurry conditions

Reactions of acetaldehyde with Diels–Alder adducts of levoglucosenone with butadiene, isoprene, and cyclohexa-diene assisted by low-valence titanium afford products of acetaldehyde addition to the acetal center with opening of the 1,6-anhydro bridge. In the case of the cyclopentadiene adduct, the reaction gives the product of addition of the ethyl substituent to the acetal center while the 1,6-anhydro bridge remains unchanged.     

Effect of pH on the reaction outcome between tetraacetyl hexaazaisowurtzitane and aldehydes

2,6,8,12-Tetraacetyl-2,4,6,8,10,12-hexaazaisowurtzitane was subjected to N-aminomethylation under various conditions, which afforded new derivatives of aminal nature. The highest yields were achieved when the reactions were carried out in a weak-alkali medium.     

Three-component domino reaction synthesis of highly functionalized bicyclic pyrrole derivatives

An efficient one-pot synthesis of highly functionalized bicyclic pyrrole derivatives by a three-component domino reaction of heterocyclic ketene aminals (HKAs), arylglyoxal monohydrate, and indoles in ethanol medium catalyzed by acetic acid is described. In this procedure, three sigma bonds were formed simultaneously. The present synthesis features excellent regio-selectivity, easy purification as well as simple starting materials.     

Synthesis of amorphous aliphatic polyester‐ether homo‐ and copolymers by radical polymerization of ketene acetals

Radical ring‐opening polymerization has been efficiently used to copolymerize 2‐methylene‐1,3,6‐trioxocane (MTC) and 2‐methylene‐1,3‐dioxepane (MDO). The cyclic ketene acetal MTC was first synthesized and homopolymerized at different temperatures using either 2,2‐azobisisobutyronitrile or dicumyl peroxide as initiator. The polymerization mechanism was not temperature‐dependent, and the polymerization proceeded with 100% ring‐opening at all the temperatures evaluated. The structures of MTC and PMTC were verified by ¹H‐nuclear magnetic resonance (NMR) and ¹³C‐NMR spectroscopies. A number‐average molecular weight of 6500 was obtained after 2 days at 70 °C in bulk, which was somewhat higher than the theoretical molecular weight. A significant amount of branching was detected from the high polydispersity index as well as the glass‐transition temperatures. The polyester‐ether was then successfully obtained by copolymerization of MTC with MDO. Different feed ratios and temperatures were used to map the reaction, and the copolymers were characterized by NMR, size exclusion chromatography, and differential scanning calorimetry. The amount of MTC within the polymer was independent of the feed ratio and always higher than the amount of MDO. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Aerobic Oxidation of 5‐(Hydroxymethyl)furfural Cyclic Acetal Enables Selective Furan‐2,5‐dicarboxylic Acid Formation with CeO2‐Supported Gold Catalyst

The utilization of 5‐(hydroxymethyl)furfural (HMF) for the large‐scale production of essential chemicals has been largely limited by the formation of solid humin as a byproduct, which prevents the operation of stepwise batch‐type and continuous flow‐type processes. The reaction of HMF with 1,3‐propanediol produces an HMF acetal derivative that exhibits excellent thermal stability. Aerobic oxidation of the HMF acetal with a CeO₂‐supported Au catalyst and Na₂CO₃ in water gives a 90–95 % yield of furan 2,5‐dicarboxylic acid, an increasingly important commodity chemical for the biorenewables industry, from concentrated solutions (10–20 wt %) without humin formation. The six‐membered acetal ring suppresses thermal decomposition and self‐polymerization of HMF in concentrated solutions. Kinetic studies supported by DFT calculations identify two crucial steps in the reaction mechanism, that is, the partial hydrolysis of the acetal into 5‐formyl‐2‐furan carboxylic acid involving OH^? and Lewis acid sites on CeO₂, and subsequent oxidative dehydrogenation of the in situ generated hemiacetal involving Au nanoparticles. These results represent a significant advance over the current state of the art, overcoming an inherent limitation of the oxidation of HMF to an important monomer for biopolymer production.     

α－氧代烯酮环二硫代缩酮化学（XXV）──经由取代－环合芳构化反应合成羟乙基芳基硫醚

以巯基乙醇为亲核体，经由β，β－１，３－亚丙二硫基－α，β－不饱和酮１与２－甲基烯丙基氯比镁的加成产物２的取代－环合芳构化反应，以适中产率得到羟乙基芳基硫醚３．首次发现２在酸催化下生成α，β－不饱和环已酮４的新反应途径．     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

2,2,6,6-Tetramethylcyclohexanethione S-methylide, a highly hindered thiocarbonyl ylide: two-step cycloadditions

The switching from the concerted 1,3-dipolar cycloaddition to a two-step pathway via zwitterionic intermediates requires a major energy difference between HOMO-LUMO energies of 1,3-dipole and dipolarophile, as well as sterically demanding reactants. In contrast to previously studied models, the title compound 1C, a thiocarbonyl ylide prepared by N₂ extrusion from dihydrothiadiazole 7C at 80 °C, combined with 2,3-bis(trifluoromethyl)fumaronitrile (11) to give a zwitterion (gauche-10); the latter failed to close the thiolane ring by 1,5-cyclization, but formed the seven-membered ketene imine 9C by 1,7-cyclization. X-ray analysis of 9C revealed an angle-deformed cumulated bond system and a transoid relation of the CF₃ groups. The relatively stable 9C allowed ¹⁹F NMR recordings from −90 to +90 °C; temperature-dependent line broadening resulted from equilibration with ≤1% of an unknown isomer. Among various possible angle-strained rate processes, an inversion transoid19?cisoid20 is preferred which involves a topomerization at the CN bond; lateral inversion and rotation are discussed. At 80 °C in solution, ketene imine 9C slowly suffered fragmentation to give trans- and cis-1,2-bis(trifluoromethyl)cyclopropane-1,2-dicarbonitrile (13)+thioketone 6C by intramolecular substitution. The reaction of 1C with ethenetetracarbonitrile furnished a tetracyanothiolane 3C, whereas 1C and dimethyl 2,3-dicyanofumarate ((E)-26) afforded thiolanes of the same trans,cis-ratio as 1C with dimethyl 2,3-dicyanomaleate ((Z)-26); a preceding (E,Z)-equilibration of 26 thwarts mechanistic conclusions. When the solvent contained water or methanol, short-lived ketene imines 4C and 31 were intercepted.