双β-二酮配体配位性的理论研究

基于自洽反应场(SCRF)中的极化连续介质模型(PCM), 采用密度泛函理论B3LYP/6-31G**计算了以二硫醚和芳环为桥基的两类双β-二酮配体的空间构型和电子结构, 结合其配合物晶体结构数据, 研究配体分子电子结构与配位性的关联性. 结果表明, 配体分子的几何构型、前线轨道、偶极矩和电荷布居, 与配合物构型、活性配位原子和配位形式(单核或多核、分子内或分子间)之间的关联性与一致性十分有意义. 配体的理论计算研究可以在一定层次上为配合物几何结构特征和配位特性提供合理的分析与预测.     

Polydopamine-Assisted Rapid One-Step Immobilization of L-Arginine in Capillary as Immobilized Chiral Ligands for Enantioseparation of Dansyl Amino Acids by Chiral Ligand Exchange Capillary Electrochromatography

Herein, a novel L-arginine (L-Arg)-modified polydopamine (PDA)-coated capillary (PDA/L-Arg@capillary) was firstly fabricated via the basic amino-acid-induced PDA co-deposition strategy and employed to constitute a new chiral ligand exchange capillary electrochromatography (CLE-CEC) method for the high-performance enantioseparation of D,L-amino acids (D,L-AAs) with L-Arg as the immobilized chiral ligand coordinating with the central metal ion Zn(II) as running buffer. Assisted by hydrothermal treatment, the robust immobilization of L-Arg on the capillary inner wall could be facilely achieved within 1 h, prominently improving the synthesis efficiency and simplifying the preparation procedure. The successful preparation of PDA/L-Arg coatings in the capillary was systematically characterized and confirmed using several methods. In comparison with bare and PDA-functionalized capillaries, the enantioseparation capability of the presented CLE-CEC system was significantly enhanced. Eight D,L-AAs were completely separated and three pairs were partially separated under the optimal conditions. The prepared PDA/L-Arg@capillary showed good repeatability and stability. The potential mechanism of the greatly enhanced enantioseparation performance obtained by PDA/L-Arg@capillary was also explored. Moreover, the proposed method was further utilized for studying the enzyme kinetics of L-glutamic dehydrogenase, exhibiting its promising prospects in enzyme assays and other related applications.     

Influence of counter-anion on the coordination geometry of manganese(II) complexes with methyl-2-pyrazinecarboximidate ligand

Two new complexes of [Mn(2-MPyzCI)₂Cl₂].H²O (1) and [Mn(2-MPyzCI)₂(H₂O)₂](NO₃)₂ (2) were synthesized from the reaction of MnX₂.4H₂O (X=Cl^? and NO₃^?) with 2-cyanopyrazine in methanolic solution. The chelating methyl pyrazine-2-carboximidate (2-MPyzCI) ligand is formed via the methanolysis of 2-cyanopyrazine. Although coordination environment around manganes(II) ions is similar, but these complexes are different in geometrical position of 2-MPyzCI ligands. As both compounds are synthesized under the same reaction conditions, the only difference between these two complexes are counter ions and changing of geometrical position of ligands can be considered as a result of influence of the counter-anions on the molecular structures.     

Theoretical Investigation on the Hydrogen Evolution,Oxygen Evolution,and Oxygen Reduction Reactions Performances of Two-Dimensional Metal-Organic Frameworks Fe3(C2X)12 (X = NH,O, S)

Two-dimensional metal-organic frameworks (2D MOFs) inherently consisting of metal entities and ligands are promising single-atom catalysts (SACs) for electrocatalytic chemical reactions. Three 2D Fe-MOFs with NH, O, and S ligands were designed using density functional theory calculations, and their feasibility as SACs for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) was investigated. The NH, O, and S ligands can be used to control electronic structures and catalysis performance in 2D Fe-MOF monolayers by tuning charge redistribution. The results confirm the Sabatier principle, which states that an ideal catalyst should provide reasonable adsorption energies for all reaction species. The 2D Fe-MOF nanomaterials may render highly-efficient HER, OER, and ORR by tuning the ligands. Therefore, we believe that this study will serve as a guide for developing of 2D MOF-based SACs for water splitting, fuel cells, and metal-air batteries.     

Theoretical research on the spin-Hamiltonian parameters of the square-planar CuS46− clusters in Cu(II)–dithiophosphonate complexes

The spin-Hamiltonian parameters (g-factors g_//, g_⊥ and hyperfine structure constants A_//, A_⊥) of the square-planar CuS^{6 ?}₄ clusters in Cu(II)–bis [4-ethoxphenyl-O-alkyl]-dithiophosphonate complexes are computed with the high-order perturbation formulas based on the two-mechanism model. The model includes the contributions to spin-Hamiltonian parameters from the vastly-utilised crystal-field (CF) mechanism concerning the CF excited states and the generally-omitted charge-transfer (CT) mechanism due to CT excited states. The energy levels of CF and CT excited states needed in the calculation are obtained from the observed optical spectra. The calculated results are in rational accordance with the experimental values. The signs of constants A_// and A_⊥ are suggested and the reasons of the very small g-shifts |?g_i| (= | g_i ? g_e |, where g_e ≈ 2.0023 and i = // or ⊥) are discussed.     

Arene‐Limited Nondirected C−H Activation of Arenes

The nondirected C(sp²)−H activation of simple arenes has advanced significantly in recent years through the discovery of new catalyst systems that are able to perform transformations with the arene as the limiting reagent. Important developments in catalyst and ligand design that have improved reactivity and selectivity are reviewed.     

Is Iron the New Ruthenium?

Ruthenium complexes with polypyridine ligands are very popular choices for applications in photophysics and photochemistry, for example, in lighting, sensing, solar cells, and photoredox catalysis. There is a long-standing interest in replacing ruthenium with iron because ruthenium is rare and expensive, whereas iron is comparatively abundant and cheap. However, it is very difficult to obtain iron complexes with an electronic structure similar to that of ruthenium(II) polypyridines. The latter typically have a long-lived excited state with pronounced charge-transfer character between the ruthenium metal and ligands. These metal-to-ligand charge-transfer (MLCT) excited states can be luminescent, with typical lifetimes in the range of 100 to 1000 ns, and the electrochemical properties are drastically altered during this time. These properties make ruthenium(II) polypyridine complexes so well suited for the abovementioned applications. In iron(II) complexes, the MLCT states can be deactivated extremely rapidly (ca. 50 fs) by energetically lower lying metal-centered excited states. Luminescence is then no longer emitted, and the MLCT lifetimes become much too short for most applications. Recently, there has been substantial progress on extending the lifetimes of MLCT states in iron(II) complexes, and the first examples of luminescent iron complexes have been reported. Interestingly, these are iron(III) complexes with a completely different electronic structure than that of commonly targeted iron(II) compounds, and this could mark the beginning of a paradigm change in research into photoactive earth-abundant metal complexes. After outlining some of the fundamental challenges, key strategies used so far to enhance the photophysical and photochemical properties of iron complexes are discussed and recent conceptual breakthroughs are highlighted in this invited Concept article.     

Beyond Biological Chelation: Coordination of f-Block Elements by Polyhydroxamate Ligands

The promise of polyhydroxamic acid ligands for the selective chelation of the f-block elements is becoming increasingly more apparent. The initial studies of polyhydroxamic acid siderophores showed the formation of highly stable complexes with Pu^IV, but a higher preference for Fe^III hindered effective applications. The development of synthetic routes toward highly pure and customizable ligands containing multiple hydroxamic acids allowed for the growth of new classes of compounds. Although the first round of these ligands focused on the incorporation of siderophore-like frameworks, the new synthetic strategies led to small molecules of various frameworks and even resins for applications in the field of f-block element separations and biological desorption. Unfortunately, a lack of consistent stability-constant data makes direct comparisons across this body of work difficult. More studies into the stability constants and separations of the f-block elements in a variety of pH ranges is necessary to truly realize the potential for polyhydroxamic acid ligands.     

Rare-earth metal derivatives supported by aminophenoxy ligand: Synthesis,characterization and catalytic performance in lactide polymerization

A library of rare-earth metal derivatives supported by an aminophenoxy ligand was prepared and their catalytic performance in lactide polymerization was investigated. It was found that the synthetic strategy had a profound effect on the formation of aminophenoxy rare-earth metal complexes. Amine elimination between Ln[N(SiMe₃)₂]₃(μ-Cl)Li(THF)₃ (Ln = Yb, Y) and 1 equiv. of the aminophenol [HONH] ([HONH] = ο-OCH₃-C₆H₄NHCH₂(3,5-^tBu₂-C₆H₂-2-OH)) in toluene gave the unexpected heterobimetallic bis(aminophenoxy) rare-earth metal complexes [ON]₂LnLi(THF)₂ (Ln = Yb ( 1 ), Y ( 2 )). When the reactions were carried out in THF and TMEDA, amine elimination produced the aminophenoxy rare-earth metal amide complexes {[ON]LnN(SiMe₃)₂}₂ (Ln = Yb ( 5 ), Y ( 6 )) in ca 85% isolated yields. Complexes 5 and 6 could also be obtained from salt metathesis reaction of {[ON]LnCl(THF)}₂ (Ln = Yb ( 3 ), Y ( 4 )) with NaN(SiMe₃)₂ in a 1:2 molar ratio. In addition, treatment of complexes 3 and 4 with NaOAr (Ar = &bond;C₆H₄-4-^tBu) and (SiMe₃)₂NC(NPrⁱ)₂Na in 1:4 and 1:2 molar ratios provided the corresponding aminophenoxy rare-earth metal derivatives {[ON](μ-OAr)Ln(μ-OAr)Na(THF)₂}₂ (Ln = Yb ( 7 ), Y ( 8 )) and {[ON]Ln[(ⁱPrN)₂CN(SiMe₃)₂]}₂ (Ln = Yb ( 9 ), Y ( 10 )), respectively. These complexes were fully characterized, and their molecular structures were determined using single-crystal X-ray diffraction. Polymerization experiments showed that complexes 1 , 2 , 5 , 6 , 9 and 10 were highly active for the ring-opening polymerization of l -lactide in toluene, and complex 1 promoted l -lactide polymerization in a controlled fashion. The polymerization of rac-lactide initiated by the neutral aminophenoxy rare-earth metal complexes 5 , 6 , 9 and 10 in THF afforded heterotactic polymers.     

AuI-Catalyzed Haloalkynylation of Alkenes

The formal insertion of alkenes into aromatic chloro- and bromoalkynes takes place under cationic gold catalysis. This haloalkynylation reaction can be performed with cyclic, gem-disubstituted and monosubstituted alkenes, using BINAP, triazolo[4,3-b]isoquinolin-3-ylidene ligands or SPhos, respectively. The products were isolated in moderate to excellent yields and with complete diastereo- and regioselectivity; the halogen atom bonding the more substituted carbon of the alkene. Preliminary experiments showed that the enantioselective haloalkynylation of cyclopentene can be performed with (S)-BINAP to afford the insertion products with moderate to good enantioselectivities.