Silicon transport under rotating and combined magnetic fields in liquid phase diffusion growth of SiGe

The effect of applied rotating and combined (rotating and static) magnetic fields on silicon transport during the liquid phase diffusion growth of SiGe was experimentally studied. 72‐hour growth periods produced some single crystal sections. Single and polycrystalline sections of the processed samples were examined for silicon composition. Results show that the application of a rotating magnetic field enhances silicon transport in the melt. It also has a slight positive effect on flattening the initial growth interface. For comparison, growth experiments were also conducted under combined (rotating and static) magnetic fields. The processed samples revealed that the addition of static field altered the thermal characteristics of the system significantly and led to a complete melt back of the germanium seed. Silicon transport in the melt was also enhanced under combined fields compared with experiments with no magnetic field. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

金属薄膜电阻特性与厚度测量

考察不同沉积时间的金属铝与铜的薄膜的沉积态,电阻变化与厚度,厚度测量采用实验室光学干涉和透过率对比方法.金相显微与铝铜电阻变化的测量表明,不连续薄膜与连续过渡之间,电阻显著变化处不同.铝膜电阻随时间变化过程开始时存在波动状态.     

The ESR study of single crystal spinel ZnCr2Se4 diluted with Sb and V

The single crystal of Sb³⁺ and V³⁺ doped zinc chromium selenide spinel ZnCr₂Se₄ were prepared by a chemical transport method and characterized by ESR spectroscopy in order to examine the effect of nonmagnetic antimony and magnetic vanadium on properties of the system. For antimony admixtures the Neel temperature is very similar to that of the parent spinel ZnCr₂Se₄ (22 K). However, upon incorporating vanadium ions, the T_N temperature decreases down to 17.5 K, determined for the maximum vanadium content (x=0.06). The temperature dependence of the ESR linewidth over paramagnetic region is interpreted by an occurrence of spin-phonon interaction. The strong broadening linewidth together with its strong temperature dependence for vanadium doped ZnCr₂Se₄ is explained by the complex paramagnetic relaxation model.     

Viscous shocks in Hele-Shaw flow and Stokes phenomena of the Painlevé I transcendent

In Hele-Shaw flows at vanishing surface tension, the boundary of a viscous fluid develops cusp-like singularities. In recent papers Lee et al. (2009, 2008) [8] and [9] we have showed that singularities trigger viscous shocks propagating through the viscous fluid. Here we show that the weak solution of the Hele-Shaw problem describing viscous shocks is equivalent to a semiclassical approximation of a special real solution of the Painlevé I equation. We argue that the Painlevé I equation provides an integrable deformation of the Hele-Shaw problem which describes flow passing through singularities. In this interpretation shocks appear as Stokes level-lines of the Painlevélinear problem.     

Czochralski-growth of germanium crystals containing high concentrations of oxygen impurities

Oxygen-containing germanium (Ge) single crystals with low density of grown-in dislocations were grown by the Czochralski (CZ) technique from a Ge melt, both with and without a covering by boron oxide (B₂O₃) liquid. Interstitially dissolved oxygen concentrations in the crystals were determined by the absorption peak at 855 cm⁻¹ in the infrared absorption spectra at room temperature. It was found that oxygen concentration in a Ge crystal grown from melt partially or fully covered with B₂O₃ liquid was about 10¹⁶ cm⁻³ and was almost the same as that in a Ge crystal grown without B₂O₃. Oxygen concentration in a Ge crystal was enhanced to be greater than 10¹⁷ cm⁻³ by growing a crystal from a melt fully covered with B₂O₃; with the addition of germanium oxide powder, the maximum oxygen concentration achieved was 5.5×10¹⁷ cm⁻³. The effective segregation coefficients of oxygen in the present Ge crystal growth were roughly estimated to be between 1.0 and 1.4.     

Hydride vapor phase epitaxy of GaN boules using high growth rates

The boule-like growth of GaN in a vertical AIXTRON HVPE reactor was studied. Extrinsic factors like properties of the starting substrate and fundamental growth parameters especially the vapor gas composition at the surface have crucial impact on the formation of inverse pyramidal defects. The partial pressure of GaCl strongly affects defect formation, in-plane strain, and crystalline quality. Optimized growth conditions resulted in growth rates of 300–500 μm/h. GaN layers with thicknesses of 2.6 and of 5.8 mm were grown at rates above 300 μm/h. The threading dislocation density reduces with an inverse proportionality to the GaN layer thickness. Thus, it is demonstrated that growth rates above 300 μm/h are promising for GaN boule growth.     

Growth and shape control of orthorhombic Fe5(PO4)4(OH)3·2H2O single crystalline dendrites

Orthorhombic Fe₅(PO₄)₄(OH)₃·2H₂O single crystalline dendritic nanostructures have been synthesized by a facile and reproducible hydrothermal method without the aid of any surfactants. The influences of synthetic parameters, such as reaction time, temperature, the amount of H₂O₂ solution, pH values, and types of iron precursors, on the crystal structures and morphologies of the resulting products have been investigated. The formation process of Fe₅(PO₄)₄(OH)₃·2H₂O dendritic nanostructures is time dependent: amorphous FePO₄·nH₂O nanoparticles are formed firstly, and then Fe₅(PO₄)₄(OH)₃·2H₂O dendrites are assembled via a crystallization-orientation attachment process, accompanying a color change from yellow to green. The shapes and sizes of Fe₅(PO₄)₄(OH)₃·2H₂O products can be controlled by adjusting the amount of H₂O₂ solution, pH values, and types of iron precursors in the reaction system.     

Template-based fabrication of Ag–ZnO core–shell nanorod arrays

We report a simple, versatile, two-step fabrication technique for synthesizing a core–shell nanorod array whose architecture is specifically suited for use as an electrode in a dye sensitized solar cell (DSSC). The particular structure fabricated by us consists of a parallel array of 5 μm long and 150–200 nm wide Ag nanorod cores, each coated with a 15–20 nm thick ZnO shell. Importantly, the shell thickness is roughly uniform throughout the length of the rods, which are free standing but distinctly separated from each other. This would allow the dye to penetrate freely and cover the ZnO surface completely in a DSSC.     

A parametric view on the Mangasarian–Fromovitz constraint qualification

The growth of the multipliers, when the parameter approaches such a critical parameter, is characterized by a parametric constraint qualification which is introduced here. It is equivalent to a bound on the growth of the multipliers. Received May 8, 1995 / Revised version received February 12, 1998 Published online February 25, 1999