A Promising MgII‐Ion‐Selective Luminescent Probe: Structures and Properties of Dy–Mn Polymers with High Symmetry

Two Dy–Mn polymers, {[Dy(L¹)₃Mn_1.5(H₂O)₃]?3.125 H₂O}_n ( 1 , L¹=pyridine‐2,6‐dicarboxylic acid) and {[Dy(L²)₃Mn_1.5(H₂O)₆]?8.25 H₂O}_n ( 2 , L² = 4‐hydroxylpyridine‐2,6‐dicarboxylic acid), with high symmetry (S₆) have been prepared. Polymer 1 has a nanoporous 3D framework with channel of about 17.6 Å diameter, while 2 has a honeycomb‐type 2D structure with the cavity of approximately 14.4 Å diameter. In the construction of multidimensional porous polymers with 3d–4f mixed metals, it is the first observation that a ligand substituent effect leads to dramatic differences in the structures formed. Luminescent studies reveal that the emission intensities of 1 and 2 increase significantly upon the addition of Mg²⁺, whereas the introduction of other metal ions leaves the intensity unchanged or even weakens it; hence, both of them may serve as good candidates of Mg²⁺ luminescent probes. To our knowledge, complex 1 is also the first example of a 3d–4f metal‐based nanoporous polymer to exhibit luminescent selectivity for Mg²⁺. Magnetic susceptibility measurements reveal a rather rare ferromagnetic interaction in 2 . Thermal gravimetric analyses and powder X‐ray diffraction investigations have also been performed, suggestive of high thermal stability of 1 .     

Comparative characterisation by atomic force microscopy and ellipsometry of soft and solid thin films

Ellipsometry and atomic force microscopy (AFM) were used to study the film thickness and the surface roughness of both ‘soft’ and solid thin films. ‘Soft’ polymer thin films of polystyrene and poly(styrene–ethylene/butylene–styrene) block copolymer were prepared by spin‐coating onto planar silicon wafers. Ellipsometric parameters were fitted by the Cauchy approach using a two‐layer model with planar boundaries between the layers. The smooth surfaces of the prepared polymer films were confirmed by AFM. There is good agreement between AFM and ellipsometry in the 80–130 nm thickness range. Semiconductor surfaces (Si) obtained by anisotropic chemical etching were investigated as an example of a randomly rough surface. To define roughness parameters by ellipsometry, the top rough layers were treated as thin films according to the Bruggeman effective medium approximation (BEMA). Surface roughness values measured by AFM and ellipsometry show the same tendency of increasing roughness with increased etching time, although AFM results depend on the used window size. The combined use of both methods appears to offer the most comprehensive route to quantitative surface roughness characterisation of solid films. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Lyotropic liquid crystalline poly(aryl ether ketone) copolymer containing phthalazinone moiety and biphenyl mesogen

A novel lyotropic liquid crystalline material poly(aryl ether ketone) copolymer containing phthalazinone moiety and biphenyl mesogen named P-8515 was developed by a mild solution polycondensation method. The molecular weight (M_n) was 53,000 and the value of molecular weight distribution index (MDI) was 2.49 detected by GPC. The critical concentration (C^∗) of P-8515 was 36 wt% and P-8515 exhibited characteristic nematic lyotropic liquid crystalline phases in NMP solution at different concentrations and the phase morphology changed to a typical threaded texture when shear forces were induced from PLM observations. The T_g value was 238 °C and the value for 5% weight loss temperature was 515 °C in nitrogen from DSC and TGA determinations, respectively.     

Effect of Poly(methacrylic acid) on the Cytokine Level in an In Vivo Tumor Model

Cancer is a leading cause of mortality globally. Despite remarkable improvements in cancer-treatment approaches, disease recurrence and progression remain major obstacles to therapy. While chemotherapy is still a first-line treatment for a variety of cancers, the focus has shifted to the development and application of new approaches to therapy. Nevertheless, the relationship between immune response, neoplastic diseases and treatment efficiency is not fully understood. Therefore, the aim of the study was to investigate the immunopharmacological effects of methacrylic acid homopolymer in an in vivo tumor model. Materials and methods: Monomeric methacrylic acid was used to synthesize polymers. Methacrylic acid was polymerized in dioxane in the presence of 4-Cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl]pentanoic acid. To study the molecular weight characteristics of PMAA by GPC, carboxyl groups were preliminarily methylated with diazomethane. An experimental cancer model was obtained by grafting RMK1 breast cancer cells. The serum levels of IL-6, IL-10, IL-17, transforming growth factor β1 (TGF-β1), and tumor necrosis factor α (TNF-α) were measured by ELISA. Results: The effect of PMAA on the serum concentrations of several cytokines was studied upon its single administration to laboratory animals in early neoplastic process. The IL-6, IL-17 and TGF-β1 concentrations were found to change significantly and reach the level observed in intact rats. The IL-10 concentration tended to normalize. Conclusion: The positive results obtained are the basis for further studies on the effect of methacrylic-acid polymers with different molecular-weight characteristics on the neoplastic process.     

Influence of Test Specimen Geometry and Water Soaking on the In Vitro Cytotoxicity of Orthocryl®, Orthocryl® LC,Loctite® EA 9483 and Polypropylene

Depending on their composition, plastics have a cytotoxic potential that needs to be evaluated before they are used in dentistry, e.g., as orthodontic removable appliances. Relevant guidelines set out requirements that a potential new resin in the medical field must meet, with a wide scope for experimental design. In the present study, test specimens of different geometries consisting of varying polymers (Orthocryl^®, Orthocryl^® LC, Loctite^® EA 9483, Polypropylene) were soaked for different periods of time, then transferred to cell culture medium for 24 h, which was subsequently used for 24-h cultivation of A549 cells, followed by cytotoxicity assays (WST-1, Annexin V-FITC-propidium iodide (PI) flow cytometry). In this context, a reduction in the cytotoxic effect of the eluates of test specimens prepared from Orthocryl^® LC and Loctite^® EA 9483 was particularly evident in the Annexin V-FITC-PI assay when the soaking time was extended to 48 h and 168 h, respectively. Consistent with this, a reduced release of potentially toxic monomers into the cell culture medium, as measured by gas chromatography-mass spectrometry, was observed when the prior soaking time of test specimens of all geometries was extended. Remarkably, a significant increase in cytotoxic effect was observed in the WST-1 assay, which was accompanied by a higher release of monomers when the thickness of the test sample was increased from 0.5 to 1.0 mm, although an elution volume adapted to the surface area was used. However, further increasing the thickness to 3.0 mm did not lead to an increase in the observed cytotoxicity or monomer release. Test specimens made of polypropylene showed no toxicity under all test specimen sizes and soaking time conditions. Overall, it is recommended to perform toxicity studies of test specimens using different geometries and soaking times. Thereby, the influence of the different specimen thicknesses should also be considered. Finally, an extension of the test protocols proposed in ISO 10993-5:2009 should be considered, e.g., by flow cytometry or monomer analysis as well as fixed soaking times.     

Strengthening the Connection between Science,Society and Environment to Develop Future French and European Bioeconomies: Cutting-Edge Research of VAALBIO Team at UCCS

The development of the future French and European bioeconomies will involve developing new green chemical processes in which catalytic transformations are key. The VAALBIO team (valorization of alkanes and biomass) of the UCCS laboratory (Unité de Catalyse et Chimie du Solide) are working on various catalytic processes, either developing new catalysts and/or designing the whole catalytic processes. Our research is focused on both the fundamental and applied aspects of the processes. Through this review paper, we demonstrate the main topics developed by our team focusing mostly on oxygen- and hydrogen-related processes as well as on green hydrogen production and hybrid catalysis. The social impacts of the bioeconomy are also discussed applying the concept of the institutional compass.     

The Kinetics of Formation of Microporous Polytriazine in Diphenyl Sulfone

This study highlights the value of nonisothermal kinetic methods in selecting temperature conditions for the isothermal preparation of microporous polymeric materials. A dicyanate ester is synthesized and the kinetics of its polymerization in diphenyl sulfone are studied by calorimetry under nonisothermal conditions. The kinetics are analyzed by a model-based approach, using the Kamal model, as well as by a model-free approach, using an advanced isoconversional method. Both approaches correctly predict the time to completion of polymerization at a given temperature. The material prepared independently at the predicted temperature is characterized by electron microscopy and CO₂ adsorption measurements and is confirmed to possess a microporous structure with a multimodal distribution of micropores with two major maxima at ~0.5 and 0.8 nm.     

Supplement to the paper “A collection of 505 papers on false or unconfirmed ferroelectric properties in single crystals,ceramics and polymers [Front. Phys. 14(6), 63301 (2019)]”

This supplement contains 222 (angel number) further papers on false or unconfirmed ferroelectric properties in single crystals, ceramics and polymers and only concerns bulk materials. Thus, the number of such papers has reached huge value 727. The papers marked in red have drastically broken the principles of symmetry because they reported the existence of ferroelectricity in crystals without the polar axis.