Polyurethanes with separately tunable biodegradation behavior and mechanical properties for tissue engineering

Two series (random and block) poly(glycolide‐co‐ε‐caprolactone) macrodiols with various glycolide to ε‐caprolactone ratios (50/50 and 30/70, R‐PG50C, R‐PG30C, B‐PG50C, and B‐PG30C) were synthesized. Next, segmented polyurethanes (PUs) were synthesized based on the synthesized macrodiols, 1,6‐hexamethylene diisocyanate and 1,4‐butanediol (PU‐R30, PU‐R50, PU‐B30, and PU‐B50). Effect of glycolide (G) and ε‐caprolactone (C) monomers arrangement (random or block) on the PUs properties were investigated via FTIR, ¹H NMR, DSC, TGA, DMA, SEM, and mechanical tests. All PUs illustrated T_g (−33°C to −48°C) and T_m (102°C to 139°C) corresponding to the soft and the hard segments, respectively. Polymers based on block macrodiols also showed T_m related to the soft segments. While PUs underwent a two‐step thermal degradation, the PUs based on block macrodiols indicated higher degradation temperature. Dynamic mechanical analysis results evidenced development of a well‐defined microphase separated structure in PU‐R30. Contact angle (about 70°‐80°) and water uptake (around 20% after 24 hours) of the PU films are close to those suitable for tissue engineering materials. The PU based on R‐PG30C (PU‐R30) exhibited the highest tensile strength (2.87 MPa) followed by PU‐B50 and PU‐R50. Over a 63‐day in vitro degradation study in phosphate buffered saline, the PUs showed variable weight loss (up to 40%) depending on their soft segments composition and arrangement. Also, the PUs showed no cytotoxicity. Thus, these PUs with tunable biodegradation rate and mechanical properties are suitable candidates for tissue engineering.     

Effect of Pseudomonas moorei KB4 Cells’ Immobilisation on Their Degradation Potential and Tolerance towards Paracetamol

Pseudomonas moorei KB4 is capable of degrading paracetamol, but high concentrations of this drug may cause an accumulation of toxic metabolites. It is known that immobilisation can have a protective effect on bacterial cells; therefore, the toxicity and degradation rate of paracetamol by the immobilised strain KB4 were assessed. Strain KB4 was immobilised on a plant sponge. A toxicity assessment was performed by measuring the concentration of ATP using the colony-forming unit (CFU) method. The kinetic parameters of paracetamol degradation were estimated using the Hill equation. Toxicity analysis showed a protective effect of the carrier at low concentrations of paracetamol. Moreover, a pronounced phenomenon of hormesis was observed in the immobilised systems. The obtained kinetic parameters and the course of the kinetic curves clearly indicate a decrease in the degradation activity of cells after their immobilisation. There was a delay in degradation in the systems with free cells without glucose and immobilised cells with glucose. However, it was demonstrated that the immobilised systems can degrade at least ten succeeding cycles of 20 mg/L paracetamol degradation. The obtained results indicate that the immobilised strain may become a useful tool in the process of paracetamol degradation.     

Effect of biodegradation conditions on morphology of ternary compositions of low density polyethylene with poly(lactic acid) and starch

Polyethylene–poly(lactic acid)–starch ternary compositions were obtained in a rotor disperser under conditions of shear deformation. Their biodegradation under the action of mold fungus spores and soil was investigated using IR spectroscopy and SEM. The changes under the fungal action revealed that the ternary blends represented a nutrient medium, while the exposure to soil led to alteration in morphology due to the whole range of numerous environmental factors.     

Metabolites from the biodegradation of 1,6‐hexanediol dibenzoate,a potential green plasticizer,by Rhodococcus rhodochrous

Metabolites from the biodegradation of a potential plasticizer 1,6‐hexanediol dibenzoate in the presence of n‐hexadecane as a co‐substrate by the common soil organism Rhodococcus rhodochrous were identified using GC/MS and Fourier transform mass spectroscopy (FTMS) techniques. Trimethylsilylation of compounds from the biodegradation broth permitted detection of the following metabolites: 1‐hexadecyl benzoate, 6‐benzoyloxyhexanoic acid, 4‐benzoyloxybutanoic acid, 6‐benzoyloxyhexan‐1‐ol and benzoic acid. The presence of these metabolites was confirmed by repeating the biodegradation with 1,6‐hexanediol di[²H₅]benzoate, by measurement of their exact masses in FTMS and by comparison with available authentic materials. The results show that biodegradation of 1,6‐hexanediol dibenzoate by R. rhodochrous does not lead to the accumulation of persistent metabolites as has been reported for commercial dibenzoate plasticizers. Copyright © 2009 John Wiley & Sons, Ltd.     

Simulation of chemical metabolism for fate and hazard assessment. IV. Computer-based derivation of metabolic simulators from documented metabolism maps

Computer simulation of xenobiotic metabolism and degradation is usually performed proceeding from a set of expert-developed rules modelling the actual enzyme-driven chemical reactions. With the accumulation of extensive metabolic pathway data, the analysis required to derive such chemical reaction patterns has become more objective, but also more convoluted and demanding. Herein we report on our computer-based approach for the analysis of metabolic maps, leading to the construction of reaction rules statistically suitable for simulation purposes. It is based on the set of so-called bare transformations which encompass all unique reaction patterns as obtained by a heuristically enhanced maximum common subgraph algorithm. The bare transformations guarantee that no existing metabolite is missed in simulation at the expense of an enormous amount of false positive predictions. They are rendered more selective by correlating the generated true and false positives to the locations of typical chemical functional groups in the potential reactants. The approach and its results are illustrated for a metabolic map collection of 15 cycloalkanes.     

真菌BFM-X1对聚丁二酸丁二醇酯薄膜的降解过程

对菌株Bionectria sp.BFM-X1(简称BFM-X1)分别利用不同碳源对聚丁二酸丁二醇酯(PBS)薄膜的降解情况及降解后的残留膜进行了观察分析,揭示PBS薄膜的微生物降解过程.结果表明:菌株分别以PBS乳剂、葡萄糖、大豆油及甘油为唯一碳源时均能有效降解PBS薄膜；降解过程表现为表面失去光泽期、裂纹状结构期、破碎期和完全降解期4个阶段,并存在迟滞期,且葡萄糖碳源下的降解速率快于其他碳源的；菌株的菌丝能在PBS膜表面上扩展生长是该菌株降解PBS的前提,真菌的寄生作用是前期降解的主要动力；降解过程中胞外酶的水解作用使聚合物的酯键水解,生成可被菌株同化吸收的小分子；菌株BFM-X1对PBS薄膜的降解首先发生在膜表面,非结晶部分先于结晶部分被降解.     

Biodegradation behaviour of poly(lactic acid) and (lactic acid-ethylene glycol-malonic or succinic acid) copolymers under controlled composting conditions in a laboratory test system

(Lactic acid, ethylene glycol, malonic or succinic acid) copolymers [(LA-EG-MA) and (LA-EG-SA) copolymers] were synthesized with different monomer feed ratios by direct polycondensation. The copolymers were characterized in terms of various properties such as acid value and number average molecular weight. The aerobic biodegradation under controlled composting conditions of commercially available and laboratory synthesized poly(l-lactic acid) (PLA) and synthesized copolymers was carried out according to ISO 14855-1:2005. The biodegradability of tested materials was found to be strongly dependent on the lactic acid content, ranging from 94% (method A) and 104% (method B) to 43% (method A) and 46% (method B) over the 110-days of the 50 °C composting.     

The phototransformation of 4-chloro-2-methylphenoxyacetic acid under KrCl and XeBr excilamps irradiation in water

The effect of UV radiation of a KrCl and a XeBr on the photodegradation of 4-chloro-2-methylphenoxyacetic acid (MCPA) was studied. The main photoproducts were identified by gas chromatograph/mass spectrometry (GC/MS). The variation of chlorine-ion and active chlorine in MCPA aqueous solution exposed to excilamp radiation was also defined by analytical methods. Irradiation of MCPA solution with a KrCl excilamp emitting mainly at 222 nm yield 2-methylhydroquinone and lactone of 2-hydroxy-3-methyl-5-chlorophenoxyacetic acid as the main photoproducts. Irradiation of MCPA solution with a XeBr excilamp emitting mainly at 283 nm yield 2-methylhydroquinone as the main photoproduct. Biological processes are not suitable for MCPA removal due to low or total absence of biodegradability of this class of pollutants. Estimation of biodegradability of phototreated MCPA solution was carried out according to ratios of biological oxygen demand (BOD₅) to chemical oxygen demand (COD). The biodegradability of MCPA solutions increased after irradiation.     

Influence of various starch types on PCL/starch blends anaerobic biodegradation

Research concentrated on the biodegradable capability of PCL blends with various types of starch in an anaerobic aqueous environment of mesophilic sludge from a municipal wastewater treatment plant. For blend preparation, use was made of a native starch Meritena from maize, another from Waxy – a genetically modified type of maize, as well as Gel Instant, a gelatinized starch, and an amaranth starch. Additional PCL/starch blends were prepared from the same starch types, but these were initially plasticized with glycerol. The biodegradability tests were supplemented with thermo gravimetric analysis (TGA), and differential scanning calorimetry (DSC); morphology was identified using scanning electron microscopy (SEM), plus mechanical properties were also tested. While mixtures of PCL with starches plasticized with glycerol exhibited improved mechanical properties and a higher degree of biodegradation in the anaerobic environment, mixtures of PCL with pure forms of starch were ascertained as rather resistant to the anaerobic aqueous environment. TGA and DSC analysis confirmed the removal of starch and glycerol from the PCL matrix. SEM then proved these results through the absence of starch grains in the samples following anaerobic biodegradation.