双肽、多肽物质和蛋白质的紫外共振拉曼光谱研究现状

本文介绍了紫外共振拉曼光谱技术在双肽、多肽物质和蛋白质二级结构研究的现状和进展，双肽物质ＮＭＡ和ＧＬＹ—ＧＬＹ水溶液光异构化过程的紫外共振拉曼光谱研究，简述了紫外共振拉曼光谱实验技术要点。     

Interactions between oligopeptides and oxidised titanium surfaces detected by vibrational spectroscopy

Five alternating polar/hydrophobic oligopeptides derived from EAK 16 (AEAEAKAKAEAEAKAK) were examined in comparison with EAK 16 (peptide 1) both after solubilisation/lyophilisation and deposition on oxidised titanium surfaces. The peptides were synthesised for their possible use as biomimetic materials due to their self‐assembling properties and the presence, in one of them, of the arginine‐glycine‐aspartic (RGD) sequence, an active modulator of cell adhesion. Infrared (IR) and Raman spectroscopies were used to investigate the influence of the amino acid substitution on the self‐assembling properties of the peptides under both experimental conditions. In the lyophilised peptides, β‐sheet was the prevailing conformation (65–69%) as in EAK 16, irrespective of acid substitution (E→D, peptide 2), basic substitution (K→O, peptide 3), hydrophobic spacer substitution (A→Abu, peptide 4 and A→Y, peptide 5) and RGD insertion (peptide 6). After deposition on oxidised titanium, the main conformation remained β‐sheet. The side‐chain shortening of the acidic amino acid residue (peptide 2) or the insertion of a rigid and bulky residue such as Y (peptide 5) decreased the self‐assembling ability more than the side‐chain shortening of the basic amino acid residue (peptide 3) or the insertion of the RGD head (peptide 6). The interaction with the oxidised titanium surface was mainly due to carboxylate groups with a bidentate bridging coordination and C  O peptidic groups. Copyright © 2010 John Wiley & Sons, Ltd.     

SE-HPLC/ICP-MS/ESI-MS联用技术用于富镉植物中镉的形态研究

用不同形态的镉培养液(氯化镉、硝酸镉、镉-EDTA、草酸镉和柠檬酸镉)对不同种类的蕨类植物(狗脊、舌厥、石松、瓦韦和石韦)进行培养。研究发现,镉在植物体不同部位的富集量是有差异的(富集量：根>茎>叶);对SEC-HPLC截取出的植物鳌合肽(PCs)研究表明,不同形态的镉能不同程度的诱发植物体中PCs的合成,从而PCs与Cd配位,降低镉的毒性,发现的配体主要为PC₃,iso-PC₃(βAla)和iso-PC₂(βAla)。文章还研究了不同形态镉胁迫下的蕨类植物各部位中镉的分布情况,并且对植物体中经镉诱导形成的PCs-Cd配合物的形态进行研究,进而对其解毒机理进行探讨。     

Study of the gradual interface between hydroxyapatite thin films PLD grown onto Ti-controlled sublayers

Hydroxyapatite thin films were grown on layered structures by Pulsed Laser Deposition with the goal of investigating the interface of the ceramic film with the substrate. The latter consisted of Si/TiN/Ti sandwich structures. This multilayer substrate was also prepared by laser ablation earlier in the same experimental session.This particular type of structure was chosen in order to induce the in situ growth of hydroxyapatite directly onto freshly deposited Ti. We tried this way to avoid previous direct Ti exposure to air, hence its oxidation. The subsequent depositions of multilayers were performed with the aid of a carousel multi-target system mounted inside the irradiation chamber. This allowed for selecting in order the respective TiN, Ti and HA targets without opening the chamber between individual depositions.X-ray diffractometry, transmission electron microscopy and selected area electron diffractometry studies revealed the formation at the interface of a transition complex phase, 2 to 25 nm thick, consisting of a mixture of TiO₂ and CaP phase. The specific growth of TiN and Ti phases was also investigated.     

Isosteres of peptides: boron analogs as dipolar forms of α‐amino acids – a theoretical study

Modification of peptides to produce peptidomimetics is of great interest, with the aim of designing potent, selective, and metabolically stable analogs having certain conformational properties. Organoboranes have been reported in the literature with a wide range of therapeutic applications. One of the therapeutically important class of molecules is amine‐carboxyboranes derived from amino acids by replacement of the Cα atom of an amino acid/peptide by boron. The conformational preferences of these peptides, with respect to backbone ω, ?, and ψ torsion angles, have been investigated by theoretical calculations. The amide bond in these molecules has the same geometry in the ground and transition states as the natural peptides. However, the boron isosteres of glycine and alanine peptides are less structured than their natural derivatives, but are distinguished by structures with a positive value for the ? angle, which is normally disfavored for natural peptides. This property could be used to build peptides with a geometry not usually seen in natural peptides. Copyright © 2007 John Wiley & Sons, Ltd.     

Peptides adsorption on TiO2 and Au: Molecular organization investigated by NEXAFS, XPS and IR

We present a spectroscopic study of the structure of two peptides deposited on Au and TiO₂:

- PeptA, (EAK16-RGD) bringing the adhesive RGD sequence linked to EAK16;

- PeptB, having RGD linked to a “scrambled” sequence of the EAK16 peptide.

Previously reported NEXAFS investigations on thin films of the self-assembling peptide EAK16 deposited on Au and TiO₂, revealed molecular order and orientation for both substrates.IR spectra show a β-sheet conformation for PeptA and a random structure for PeptB. Angular-dependent NEXAFS measurements reveal an ordered structure with preferential molecular orientation only for PeptA. XPS analysis indicates that PeptA is adsorbed on TiO₂ in a larger amount than PeptB.     

Fluorescence studies on the conformation of litorin in solution and in the presence of model membranes

The conformation of the nonapeptide hormone litorin has been studied in buffer and in the presence of lipids, using static and dynamic fluorescence. The results obtained show that, in buffer, the hormone probably exists in a collection of flexible conformers, slowly interconverting between them. The marked changes observed in fluorescence spectra and lifetimes upon addition of dimyristoylphosphatidylserine vesicles clearly show that the peptide interacts with lipids assuming lipid specific conformations. Interestingly, no significative spectroscopic changes are produced by exposure to dimirystoylphosphatidylcholine vesicles both in the gel and liquid-christalline phases, suggesting a requirement for negatively charged lipids during the process of hormone-membrane interaction.     

Fluorescent Temporin B Derivative and its Binding to Liposomes

Temporins are short (10–13 amino acids) and linear antimicrobial peptides first isolated from the skin of the European red frog, Rana temporaria, and are effective against Gram-positive bacteria and Candida albicans. Similarly to other antimicrobial peptides, the association of temporins to lipid membranes has been concluded to underlie their antimicrobial effects. Accordingly, a detailed understanding of their interactions with phospholipids is needed. We conjugated a fluorophore (Texas Red) to a Cys containing derivative of temporin B (temB) and investigated its binding to liposomes by fluorescence spectroscopy. Circular dichroic spectra for the Cys-mutant recorded in the absence and in the presence of phospholipids were essentially similar to those for temB. A blue shift in the emission spectra and diminished quenching by ferrocyanide (FCN) of Texas Red labeled temporin B (TRC-temB) were seen in the presence of liposomes. Both of these changes can be attributed to the insertion of the Texas Red into the hydrophobic region of the bilayer. Resonance energy transfer, steady state anisotropy, and fluorescence lifetimes further demonstrate the interaction of TRC-temB with liposomes to be enhanced by negatively charged phospholipids. Instead, cholesterol attenuates the association of TRC-temB with membranes. The interactions between TRC-temB and liposomes of varying negative surface charge are driven by electrostatics as well as hydrophobicity. Similarly to native temporin B also TRC-temB forms amyloid type fibers in the presence of negatively charged liposomes. This property is likely to relate to the cytotoxic activity of this peptide.     

Vibrational spectra and crystal structure of the di‐amino acid peptide cyclo(L‐Met‐L‐Met): comparison of experimental data and DFT calculations

Experimental Raman and FT‐IR spectra of solid‐state non‐deuterated and N‐deuterated samples of cyclo(L ‐Met‐L ‐Met) are reported and discussed. The Raman and FT‐IR results show characteristic amide I vibrations (Raman: 1649 cm⁻¹, infrared: 1675 cm⁻¹) for molecules exhibiting a cis amide conformation. A Raman band, assigned to the cis amide II vibrational mode, is observed at ∼1493 cm⁻¹ but no IR band is observed in this region. Cyclo(L ‐Met‐L ‐Met) crystallises in the triclinic space group P1 with one molecule per unit cell. The overall shape of the diketopiperazine (DKP) ring displays a (slightly distorted) boat conformation. The crystal packing employs two strong hydrogen bonds, which traverse the entire crystal via translational repeats. B3‐LYP/cc‐pVDZ calculations of the structure of the molecule predict a boat conformation for the DKP ring, in agreement with the experimentally determined X‐ray structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of ultrasonic power on the stability of low-molecular-weight oyster peptides functional-nutrition W1/O/W2 double emulsion

Ultrasonic-assisted treatment is an eco-friendly and cost-effective emulsification method, and the acoustic cavitation effect produced by ultrasonic equipment is conducive to the formation of stable emulsion. However, its effect on the underlying stability of low-molecular-weight oyster peptides (LOPs) functional-nutrition W₁/O/W₂ double emulsion has not been reported. The effects of different ultrasonic power (50, 75, 100, 125, and 150 W) on the stability of double emulsions and the ability to mask the fishy odor of LOPs were investigated. Low ultrasonic power (50 W and 75 W) treatment failed to form a well-stabilized double emulsion, and excessive ultrasound treatment (150 W) destroyed its structure. At an ultrasonic power of 125 W, smaller particle-sized double emulsion was formed with more uniform distribution, more whiteness, and a lower viscosity coefficient. Meanwhile, the cavitation effect generated by 125 W ultrasonic power improved storage, and oxidative stabilities, emulsifying properties of double emulsion by reducing the droplet size and improved sensorial acceptability by masking the undesirable flavor of LOPs. The structure of the double emulsion was further confirmed by optical microscopy and confocal laser scanning microscopy. The ultrasonic-assisted treatment is of potential value for the industrial application of double emulsion in functional-nutrition foods.