The thermoelectric working fluid: Thermodynamics and transport

Thermoelectric devices are heat engines, which operate as generators or refrigerators using the conduction electrons as a working fluid. The thermoelectric heat-to-work conversion efficiency has always been typically quite low, but much effort continues to be devoted to the design of new materials boasting improved transport properties that would make them of the electron crystal–phonon glass type of systems. On the other hand, there are comparatively few studies where a proper thermodynamic treatment of the electronic working fluid is proposed. The present article aims at contributing to bridge this gap by addressing both the thermodynamic and transport properties of the thermoelectric working fluid covering a variety of models, including interacting systems.     

Condensed Mode Cooling of Ethylene Polymerization in Fluidized Bed Reactors

This review gives an overview of the evolution of the technology of condensed mode cooling, primarily for the case of ethylene polymerization on supported catalysts in fluidized bed reactors. It is well known that this mode of heat removal is quite effective in allowing polyolefin manufacturers to increase significantly production rates. What is perhaps less well understood are all of the issues that, in addition to the effect of the latent heat of vaporization of injected liquid components, also have an impact on the rate of production and behavior of the reactor. However, the liquid components injected into the reactor can vaporize rapidly under full‐scale conditions, leaving behind several heavy components (with respect to ethylene) that have numerous effects on how the particles behave, on the reaction rate, and on fluidization, fouling, and other parameters related to reactor and process performance.     

Two-Step Structure Phase Transition,Dielectric Anomalies,and Thermochromic Luminescence Behavior in a Direct Band Gap 2D Corrugated Layer Lead Chloride Hybrid of [(CH3)4N]4Pb3Cl10

A direct band gap 2D corrugated layer lead chloride hybrid, [(CH₃)₄N]₄Pb₃Cl₁₀ ( 1 ), shows analogous topology to the {Mg₃F₁₀⁴⁻}_∞ layer in Cs₄Mg₃F₁₀, and with the (CH₃)₄N⁺ cations locating in the inorganic layer voids and between the interlayers. Two reversible structural phase transitions occur in 1 at 225/210 K and 328/325 K upon heating/cooling, respectively. On going from the low- to intermediate-temperature phase, the space group changes from P2₁/c to Cmca, and the crystallographic axis perpendicular to the layers is doubled with the order–disorder transformation of (CH₃)₄N ⁺ cations between the interlayers. The intermediate- and high-temperature phases are isomorphic with similar cell parameters and packing structure; their main difference concerns the disorder degree of the (CH₃)₄N ⁺ cations between the interlayers. The two-step structural phase transitions lead to dielectric anomalies around the corresponding T_c. Interestingly, 1 shows multiband emission, originating from the recombination of exciton and emission of defects. Moreover, 1 exhibits divergent thermochromic luminescent features around the T_c on the intermediate to low temperature transition.     

Surface modification for nano‐lignocellulose fiber through vapor‐phase‐assisted surface polymerization

This study addresses the inherent issues surrounding surface modification methods of nanofibers and proposes an environmentally friendly and less toxic strategy for the surface modification of hydrophilic nanofiber. From the continuation of our previous work, which discussed the easy production of nanofiber (average size: 127 nm) from oil palm mesocarp fiber (OPMF), in this work, the surface of nanofibers (M‐IL‐OPMF) were modified through vapor‐phase‐assisted surface polymerization (VASP) to improve the affinity of interface between the polymer grafted M‐IL‐OPMF and non‐polar matrix. VASP of ε‐caprolactone was successfully proceeded from the [M‐IL‐OPMF] at 70 °C for 24 h and 72 h, and compositions were estimated to be 35.7% fiber/64.3% polymer and 27.8% fiber/72.2% polymer. To confirm the grafting of PCL, size‐exclusion chromatography (SEC) and Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetry (TG), and dispersibility test in hydrophobic solvent were carried out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2575–2580     

A rapid UPLC‐MS/MS method for the determination of oleanolic acid in rat plasma and liver tissue: application to plasma and liver pharmacokinetics

A reliable high‐throughput ultra‐high performance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) method was developed and validated for oleanolic acid (OA) determination in rat plasma and liver tissue using glycyrrhetic acid as the internal standard (IS). Plasma and liver homogenate samples were prepared using solid‐phase extraction. Chromatographic separation was achieved on a C₁₈ column using an isocratic mobile phase system. The detection was performed by multiple reaction monitoring mode via positive electrospray ionization interface. The calibration curves showed good linearity (R² > 0.9997) within the tested concentration ranges. The lower limit of quantification for plasma and liver tissue was ≤0.75 ng/mL. The intra‐ and inter‐day precision and accuracy deviations were within ±15% in plasma and liver tissue. The mean extraction recoveries ranged from 80.8 to 87.0%. In addition, the carryover, matrix effect, stability and robustness involved in the method were also validated. The method was successfully applied to the plasma and hepatic pharmacokinetics of OA after oral administration to rats. Copyright © 2015 John Wiley & Sons, Ltd.     

SPE and determination by FAAS of heavy metals using a new synthesized polymer resin in various water and dried vegetables samples

Firstly, poly[phenyl thiadiazole methacrylamide-co-divinylbenzene-co-2-acrylamido-2-methylpropane sulfonic acid] (PTMAAm-co-DVB-co-AMPS), a new polymer resin was synthesized. This polymer resin was characterized by elemental analyzer, X-ray diffractometer, scanning electron microscope (SEM) and IR spectrometer. The glass column packed with the synthesized polymer resin was used for solid phase extraction (SPE). At the same time, the analytes were separated and preconcentrated from various water, dried vegetables samples and standard reference material (CRM) with SPE and determined by flame atomic absorption spectrometer (FAAS). The experimental conditions of this method such as pH, flow rates of sample, flow rates of eluent, type / concentration / volume of eluent, sample volume and matrix ions were examined. The limits of detection (µg L^?1) were calculated (3s) 0.9 for Mn(II), 1.4 for Cd(II), Co(II) and Zn(II), 1.5 for Cr(III), 2.2. for Cu(II), 1.9 for Pb(II),1.5 for Ni(II) and 1.9 for Fe(III) (n = 21). The low relative standard deviation, ≤ 2% (n = 11) and preconcentration factor as 75 for analytes were obtained.     

New heteroleptic palladium(II) dithiocarbamates: synthesis,characterization, packing and anticancer activity against five different cancer cell lines

Two new heteroleptic palladium(II) complexes have been synthesized by reacting equimolar quantities of palladium(II) chloride, sodium 4‐(2‐methoxyphenyl)piperazine‐1‐carbodithioate and diphenyl‐p‐tolylphosphine ( 1 ) or tri‐p‐tolylphosphine ( 2 ). Complexes 1 and 2 have been characterized using elemental analysis, Fourier transform infrared spectroscopy, multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy and single‐crystal X‐ray analysis. The latter technique confirms a pseudo square‐planar geometry in which two adjacent positions are occupied by bidentate dithiocarbamate while chloro and substituted triphenylphosphine are present at the remaining two positions. The anticancer activity of both complexes against five different cancer cell lines (LU – human lung carcinoma, established at UIC, Department of Surgical Oncology; MCF7 – human breast adenocarcinoma, ATCC number HTB‐22?; MDA‐MB‐231 – human breast adenocarcinoma, ATCC number HTB‐26?; Hepa‐1c1c7 – mouse liver hepatoma, ATCC number CRL‐2026?; PC‐3 – human prostate adenocarcinoma, ATCC number CRL‐1435?) was determined by MTT assay, revealing 2 has higher activity than 1 . A drug–calf thymus DNA binding study with UV–visible spectroscopy reveals a higher DNA binding affinity of 2 (3.511 × 10⁴ M^?1) than 1 (4.213 × 10³ M^?1). Density functional theory studies confirm the relatively more stable nature of 2 than 1 . Copyright © 2016 John Wiley & Sons, Ltd.     

The S-D transition and high-pressure phase stability of transition metals

Abstract

The recent discovery of a solid-solid phase change in shock-compressed Mo and the theoretical interpretation suggest valence d-electron density as a major influence on structural stability. The relationship of this experimental result to the transition metal structures and alloy phase diagrams will be discussed. Specific predictions will be presented for the locations and slopes of transition metal and transition metal alloy phase boundaries.     

Selective preconcentration of trace thorium from aqueous solutions with Th(IV)-imprinted polymers prepared by a surface-grafted technique

A novel ion-imprinted adsorbent for selective solid phase extraction of thorium(IV) based on the surface of silica gel was prepared by a surface-grafted technique with methacrylic acid (MAA) as a functional monomer. After removal of Th(IV) ions with 3?mol?L^?1 HCl solution, the obtained imprinted particles for Th(IV) exhibited specific recognition and relatively rapid kinetic process. The maximum static and total dynamic adsorption capacity of the ion-imprinted polymers (IIPs) for Th(IV) was 33.2 and 17.3?mg?g^?1, respectively. A comparison of the selectivity coefficient of the imprinted polymers with that of non-imprinted polymers showed that the imprinted matrix for Th(IV)/U(VI), Th(IV)/Ce(III), Th(IV)/La(III) and Th(IV)/Zr(IV) was 58.8, 107, 106.4 and 151.7 times greater than non-imprinted matrix, respectively. With a series of samples loading flow rate of 3?mL?min^?1 for preconcentration, an enrichment factor of 14.6 and the detection limit of 0.59?µg?L^?1 were obtained. The relative standard deviation of the method under optimum conditions was 2.1% (n?=?7). The developed method was successfully applied to the determination of trace Th(IV) in real water samples with satisfactory results.     

Determination of Uranium in Natural Waters by Solid Phase Spectrometry

Abstract

A microdetermination method (at the μg1^?1 level) for uranium has been developed, based on Solid-Phase Spectrophotometry (SPS). The uranium reacts with pyridylazo-resorcinol in the presence of fluoride to form a 1:1:1 red ternary complex, which is fixed on an anion-exchange resin. The resin absorbance is measured directly, and allows the determination of uranium in the range of 1–10μg1^?1, with an RSD of 4%. The method has been applied to the determination of U(VI) in natural waters from wells located near the deposits of industrial wastes from a uranium mineral plant in Andujar (Spain).