Transfer activity coefficient of the proton in water-pyridine mixtures. A comparison of some extrathermodynamic assumptions

Various water-pyridine mixtures have been selected in order to compare several of the most popular extrathermodynamic assumptions involved in the determination of the transfer activity coefficient of the proton, _t(H⁺). Two techniques have been utilized for this purpose: voltammetry [study of the ferrocene, ferricyanide, or thallium(1) systems] and potentiometry at equilibrium (emf measurements of various galvanic cells, including liquid junctions and hydrogen electrode or silver electrode as a test electrode). The assumptions have been classified into various groups [e.g., _t(Z^p+)=_t(Z^q+) or _t(X^–)=_t(Y⁺)], and the values of _t(H⁺) have been experimentally determined in each case. The results vary depending upon the basic assumption (several pH units); less important differences (e.g., 0.5 pH unit) occur within a given group, and this may be assigned to the nature of the reference species chosen. A simple model of solvation has been also examined; the application of the law of mass action to the corresponding equilibrium provides results close to the _t(X^–) =_t(Y⁺)type of assumptions which ultimately leads to most self-consistent results.     

改进的蝗虫优化算法在双目标应急物资中心选址问题中的应用

近年来世界各地频发灾情疫情等紧急事件,严重影响人民的生活物资保障。在这种情况下,急需建立应急物资中心来缓解燃眉之急。该类问题通常面临资源稀缺并且时间相对紧迫的处境,因此需要在短时间内获得合理的应急设施选址方案来提升服务的质量和效率。本文对应急物资中心选址问题展开研究,提出一种考虑后续运输成本以及有概率发生紧急事件而导致无法正常运送物资的双目标离散选址模型,并为此设计一种二进制多目标蝗虫优化算法。该算法采用模糊关联熵系数来引导迭代更新,同时为其添加外部档案,最优解选择机制和竞争决策机制来提升算法性能。多次数值实验表明该算法的计算效率和求解质量较高,可作为应急物资中心选址问题的一种可行且有效的算法。     

Effect of solvent on the cation-sensitive fluorescence of polyanions bearing 4′-acryloylbenzo-18-crown-6 Units

Changes in the fluorescence intensity of polyanions bearing 4-acryloylbenzo-18-crown-6 units on the addition of cations were studied in a mixed solvent of methanol and water at 30°C. The sensitivity of the change in fluorescence intensities of the polymers toward cations was strongly enhanced compared to that of the corresponding model compound. When alkali metal cations were added, the fluorescence intensity of the polymers decreased in the orders Li⁺>Na⁺>Cs⁺>Rb⁺>K⁺ in a methanol-water (19) mixture and Li⁺>Na⁺>Rb⁺>K⁺Cs⁺ in a methanol-water (91) mixture. Alkaline earth metal cations and alkylamine hydrochlorides decreased the fluorescence intensity of the polymers in a methanol-water (19) mixture. The cation-dependent decrease in the fluorescence intensity of the polymers was affected by the water fraction in a mixed solvent of methanol and water.     

Solvent effects on 17O nuclear magnetic shielding: N-methylformamide in polar and apolar solutions

The solvent effect on ¹⁷O isotropic shielding was computed by different methods: the polarizable continuum model and a mixed approach, including a few real solvent molecules treated as the solute. The experimental data show that the behavior of protic and aprotic solvents is markedly different: we found that the continuum approach describes well the observed shielding at various dielectric constants for aprotic solvents, while the mixed procedure is needed when hydrogen bonds to the magnetic centre are present.Contribution to the Jacopo Tomasi Honorary Issue     

Effective atom volumes for implicit solvent models: comparison between Voronoi volumes and minimum fluctuation volumes

An essential element of implicit solvent models, such as the generalized Born method, is a knowledge of the volume associated with the individual atoms of the solute. Two approaches for determining atomic volumes for the generalized Born model are described; one is based on Voronoi polyhedra and the other, on minimizing the fluctuations in the overall volume of the solute. Volumes to be used with various parameter sets for protein and nucleic acids in the CHARMM force field are determined from a large set of known structures. The volumes resulting from the two different approaches are compared with respect to various parameters, including the size and solvent accessibility of the structures from which they are determined. The question of whether to include hydrogens in the atomic representation of the solute volume is examined. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1857-1879, 2001     

19F and 1H NMR spectra of halocarbons

19F NMR chemical shifts and coupling constants are reported for 215 compounds. For 77 of these compounds, 1H NMR spectral data are also given. Long-range couplings, including 8J(F,F) and 5J(F,H), are reported. The complexity of halocarbon spectra owing to the presence of rotational isomers, asymmetric centers, long-range couplings, and chlorine isotope effects are illustrated, and the methods used for analyzing such complex spectra are briefly discussed.     

Quantitative weight of evidence method for combining predictions of quantitative structure-activity relationship models

ABSTRACT

A method for combining statistical-based QSAR predictions of two or more binary classification models is presented. It was assumed that all models were independent. This facilitated the combination of positive and negative predictions using a quantitative weight of evidence (qWoE) procedure based on Bayesian statistics and the additivity of the logarithms of the likelihood ratios. Previous studies combined more than one prediction but used arbitrary strengths for positive and negative predictions. In our approach, the combined models were validated by determining the sensitivity and specificity values, which are performance metrics that are a point of departure for obtaining values that measure the weight of evidence of positive and negative predictions. The developed method was experimentally applied in the prediction of Ames mutagenicity. The method achieved a similar accuracy to that of the experimental Ames test for this endpoint when the overall prediction was determined using a combination of the individual predictions of more than one model. Calculating the qWoE value would reduce the requirement for expert knowledge and decrease the subjectivity of the prediction. This method could be applied to other endpoints such as developmental toxicity and skin sensitisation with binary classification models.     

A view and a review of the melting of alkali metal halide crystals

Summary A representational model, proposed to account for the physical changes that accompany the melting of alkali halides, was described in Part 1 [1]. The liquid is portrayed as undergoing continual dynamic structural reorganization of its constituent ions between individual small domains, zones of various regular, crystal-type arrays. These alternative arrangements are stabilized by the enthalpy of melting, which, in liquids, relaxes the restriction for solids that only the single, most stable, crystal structure can be present. The dynamic character of the melt accounts for its fluid character and the loss of long-range order [1, 2]. This model is extended here to consider the phase diagrams of binary, common ion, alkali halide mixtures comprehensively reviewed in [3]. Factors determining whether each of these yields a eutectic, or a solid solution, on cooling are discussed and several trends in the 70-phase diagrams are identified. Eutectic formation, involving maintenance of the liquid state below the melting points of the pure components, is ascribed to the participation, in an extended dynamic equilibrium, of additional domains having the regular structures characteristic of double salts. The known crystalline double binary halides [3], Li/Cs or Rb/F, Cl, Br or I, melt at temperatures well below those of the simpler pure component salts. It is concluded that the set/liq model for melting, proposed in [1, 2], accounts for some important properties of the phase diagrams presented in [3].     

Solvent extraction and bulk liquid membrane transport of Co(II) and Ni(II) ammine cations by proton-ionizable crown ethers

Separation efficiencies and selectivities in solvent extraction of Co(II) and Ni(H) ammine cations from aqueous solutions into chloroform and toluene and in transport through bulk toluene membranes by proton-ionizable crown ethers have been determined. Six proton-ionizable crown ethers with differing lipophilicities, polyether cavity sizes and ionizable groups (carboxylic and sulfonic acid functions) were examined. Higher selectivity and efficiency for Co(II) ammine cation extraction was observed for the more lipophilic, proton-ionizable crown ethers. Highly lipophilic crown carboxylic acids provided effective and selective transport of Co(II) ammine cations through bulk toluene membranes.Presented in part at the 6th International Symposium on High Purity Materials in Science and Technology: Preparation, Characterization and Application of Well-Defined Materials, Dresden, GDR, May 1985, Poster D91, Poster Abstracts, pp. 144, 145.All extraction and transport experiments were conducted at this location.     

Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.