Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO3

The main purpose of incorporating fillers, such as calcium carbonate, into blends of polyolefins is to decrease costs and change tensile and impact properties. Structural differences between both components give rise to the formation of large filler agglomerates in the polymer matrix, which influence the mechanical response of the material. Therefore, the coupling agents of the Lica 12 type at various concentrations was used to facilitate the link between filler and matrix (the latter consisting of PP/HDPE 80/20 wt). Filler was added to the PP/HDPE blend at a 30 wt.% concentration. Two types of calcium carbonate (CaCO₃) were used. These have different average sizes (3.0 and 1.8 μm) which were determined by means of laser diffraction techniques. In addition other coupling agents of the titanate type, such as Lica 09, Lica 01, zirconates ZN 12, and a 1:1 mixture of Lica 12 and Lica 01, were used. This study clearly demonstrated that the addition of the coupling agent to CaCO₃ modifies the mechanical properties of the PP/HDPE/CaCO₃ composites. Values of the mechanical properties indicate that due to its characteristics, each coupling agent gives rise to increases in a particular mechanical property. In the case of Lica 01 an increase was verified in Young’s modulus at 0.7 wt.% and in elongation at break at both concentrations (0.3 and 0.7 wt.%), whereas ZN 12 brought about an increase in elongation at break. The 1:1 mixture of Lica 12 and Lica 01 caused impact resistance of the blend of PP/HDPE with CaCO₃ to increase considerably.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

Enzyme inhibitors as chemical tools to study enzyme catalysis: rational design, synthesis, and applications

Carefully designed molecules that are intimately related to the reaction mechanism of enzymes are often highly selective and potent inhibitors that serve as extremely useful chemical probes for understanding the reaction mechanism and structure of enzymes. This article describes the design, synthesis, and applications of specific inhibitors of two mechanistically distinct groups of enzymes, ATP-dependent amide ligases and Ser- and Thr-hydrolases. Our strategy is based on the premise that stable analogues of the transition state (transition-state analogues) are highly potent inhibitors that serve as good mechanistic probes, and that a key structure of a good inhibitor of one enzyme is also utilized for the inhibitors of other enzymes that share the same chemistry in their catalyzed reactions, irrespective of the degree of structural similarity and evolutionary link between the enzymes. According to these principles, we designed and synthesized a series of phosphinate- and sulfoximine-based transition-state analogue inhibitors of glutathione synthetase, gamma-glutamylcysteine synthetase and asparagine synthetase. For the second group of enzymes, we synthesized a gamma-monofluorophosphono glutamate analogue for mechanism-based affinity labeling of gamma-glutamyltranspeptidase and fluorescent phosphonic acid esters for the active-site titration of lipase. These inhibitors were used successfully as ligands for detailed kinetic analyses, X-ray crystallography, and mass analysis of the enzymes to identify the key amino acid residues responsible for catalysis and substrate recognition in the transition state.     

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

用4,4‘—壬二酰基—双（1—苯基—3—甲基—吡唑酮—5）萃取分离钍

本文研究了标题试剂(简称H_2A)与Th(Ⅳ)的络合作用及萃取行为,考查了H_2A对Fe(Ⅲ)、Co(Ⅱ)、Ni(Ⅱ)、Zn(Ⅱ)、Pb(Ⅱ)、Cu(Ⅱ)、La(Ⅲ)、Yb(Ⅲ)和U(Ⅵ)的萃取作用,试验了它对Th(Ⅳ)与上述元素及Ca(Ⅱ)、Mg(Ⅱ)、Cr(Ⅲ)、In(Ⅲ)、V(Ⅴ)、Zr(Ⅵ)的分离效果。     

若干3d过渡金属的硫代脯氨酸配合物

合成了七个新的过渡金属的硫代脯氨酸(tcH)配合物,它们分别是:[M(tc)_2](M=Mn(Ⅱ),Co((Ⅱ))和Ni(Ⅱ)),[Ni(tc)(Ac)(H_2O)],[Ni(tc)(tcH)(H_2O)]NO_3·H_2O,[Ni(tc)(Py)_2(H_2O)NO_3和[Fe(tc)_2(Cl)(H_2O)]。上述配合物的磁化率,摩尔电导,热量分析,红外及电子光谱数据表明,它们都具有八面体构型,tcH主要通过亚氨氮和羧基氧原子与金属键合。文章对这些配合物的可能结构作了初步的讨论。     

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

Stability of Copper(II), Nickel(II) and Zinc(II) Binary and Ternary Complexes of Histidine,Histamine and Glycine in Aqueous Solution

The binary and mixed-ligand complexes formed between ligands (histidine (His), histamine (Him) and glycine (Gly)) and some transition metals (Cu(II), Ni(II) and Zn(II)) were studied potentiometrically in aqueous solution at (25.0 ± 0.1) C and I = 0.10 M KCl in order to determine the protonation constants of the free ligands and stability constants of binary and ternary complexes. The complexation model for each system has been established by the software program BEST from the potentiometric data. The most probable binding mode for each binary species of histidine and for all mixed species was also discussed based upon derived equilibrium constants and stability constants related to the binary species. The ambidentate nature of the histidine ligand, i.e. the ability to coordinate histamine-like, imidazolepropionic acid-like and glycine-like modes was indicated from the results obtained. The stability of ternary complexes was quantitatively compared with their corresponding binary complexes in terms of the parameters, log K, log X and ₁₁₁₀. The concentration distributions of various species formed in solution were also evaluated. In terms of the nature of metal ion, the complex stability follows the trend Cu(II) > Ni(II) > Zn(II), which is in agreement with the Irving-Williams order of metal ions. Thus, the results obtained were compared and evaluated with those in the literature.     

原油乳状液破乳的动态法研究

The stability of different crude oil emulsions from ASP flooding production well is studied by the method of a stirred tank. The demulsifying of crude-oil emulsion by different demulsifying agents is discussed. The breakage of the crude oil emulsions from the well PO11 by the different types and concentrations of the emulsifying agents is also discussed. The breaking mechanism of the demulsifying agent is described microscopically.